???????????????????????????????
???????????????????????????????
???????????????????????????????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
???????????????????????????????
???????????????????????????????
???????????????????????????????
???????????????????????????????
???????????????????????????????
???????????????????????????????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
dracut-init.sh 0000755 00000104533 15262675530 0007347 0 ustar 00 #!/bin/bash
#
# functions used only by dracut and dracut modules
#
# Copyright 2005-2009 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
export LC_MESSAGES=C
if [[ "$EUID" = "0" ]]; then
export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,xattr,links -dfr"
else
export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr"
fi
# is_func
# Check whether $1 is a function.
is_func() {
[[ "$(type -t "$1")" = "function" ]]
}
if ! [[ $dracutbasedir ]]; then
dracutbasedir=${BASH_SOURCE[0]%/*}
[[ $dracutbasedir = dracut-functions* ]] && dracutbasedir="."
[[ $dracutbasedir ]] || dracutbasedir="."
dracutbasedir="$(readlink -f $dracutbasedir)"
fi
if ! is_func dinfo >/dev/null 2>&1; then
. "$dracutbasedir/dracut-logger.sh"
dlog_init
fi
if ! [[ $initdir ]]; then
dfatal "initdir not set"
exit 1
fi
if ! [[ -d $initdir ]]; then
mkdir -p "$initdir"
fi
if ! [[ $kernel ]]; then
kernel=$(uname -r)
export kernel
fi
srcmods="/lib/modules/$kernel/"
[[ $drivers_dir ]] && {
if ! command -v kmod &>/dev/null && vercmp "$(modprobe --version | cut -d' ' -f3)" lt 3.7; then
dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.'
exit 1
fi
srcmods="$drivers_dir"
}
export srcmods
[[ $DRACUT_FIRMWARE_PATH ]] || export DRACUT_FIRMWARE_PATH="/lib/firmware/updates:/lib/firmware:/lib/firmware/$kernel"
# export standard hookdirs
[[ $hookdirs ]] || {
hookdirs="cmdline pre-udev pre-trigger netroot "
hookdirs+="initqueue initqueue/settled initqueue/online initqueue/finished initqueue/timeout "
hookdirs+="pre-mount pre-pivot cleanup mount "
hookdirs+="emergency shutdown-emergency pre-shutdown shutdown "
export hookdirs
}
DRACUT_LDD=${DRACUT_LDD:-ldd}
DRACUT_TESTBIN=${DRACUT_TESTBIN:-/bin/sh}
DRACUT_LDCONFIG=${DRACUT_LDCONFIG:-ldconfig}
. $dracutbasedir/dracut-functions.sh
# Detect lib paths
if ! [[ $libdirs ]] ; then
if [[ "$(ldd /bin/sh)" == */lib64/* ]] &>/dev/null \
&& [[ -d /lib64 ]]; then
libdirs+=" /lib64"
[[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
else
libdirs+=" /lib"
[[ -d /usr/lib ]] && libdirs+=" /usr/lib"
fi
libdirs+=" $(ldconfig_paths)"
export libdirs
fi
# helper function for check() in module-setup.sh
# to check for required installed binaries
# issues a standardized warning message
require_binaries() {
local _module_name="${moddir##*/}"
local _ret=0
if [[ "$1" = "-m" ]]; then
_module_name="$2"
shift 2
fi
for cmd in "$@"; do
if ! find_binary "$cmd" &>/dev/null; then
dinfo "dracut module '${_module_name#[0-9][0-9]}' will not be installed, because command '$cmd' could not be found!"
((_ret++))
fi
done
return $_ret
}
require_any_binary() {
local _module_name="${moddir##*/}"
local _ret=1
if [[ "$1" = "-m" ]]; then
_module_name="$2"
shift 2
fi
for cmd in "$@"; do
if find_binary "$cmd" &>/dev/null; then
_ret=0
break
fi
done
if (( $_ret != 0 )); then
dinfo "$_module_name: Could not find any command of '$@'!"
return 1
fi
return 0
}
dracut_need_initqueue() {
>"$initdir/lib/dracut/need-initqueue"
}
dracut_module_included() {
[[ " $mods_to_load $modules_loaded " == *\ $*\ * ]]
}
dracut_no_switch_root() {
>"$initdir/lib/dracut/no-switch-root"
}
dracut_module_path() {
echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }
}
if ! [[ $DRACUT_INSTALL ]]; then
DRACUT_INSTALL=$(find_binary dracut-install)
fi
if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
DRACUT_INSTALL=$dracutbasedir/dracut-install
elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then
DRACUT_INSTALL=$dracutbasedir/install/dracut-install
fi
if ! [[ -x $DRACUT_INSTALL ]]; then
dfatal "dracut-install not found!"
exit 10
fi
if [[ $hostonly == "-h" ]]; then
if ! [[ $DRACUT_KERNEL_MODALIASES ]] || ! [[ -f "$DRACUT_KERNEL_MODALIASES" ]]; then
export DRACUT_KERNEL_MODALIASES="${DRACUT_TMPDIR}/modaliases"
$DRACUT_INSTALL ${srcmods:+--kerneldir "$srcmods"} --modalias > "$DRACUT_KERNEL_MODALIASES"
fi
fi
[[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
inst_dir() {
[[ -e ${initdir}/"$1" ]] && return 0 # already there
$DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" || :
}
inst() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_simple() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -e $1 ]] || return 1 # no source
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || :
}
inst_symlink() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -L $1 ]] || return 1
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_multiple() {
local _ret
$DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
_ret=$?
(($_ret != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
return $_ret
}
dracut_install() {
inst_multiple "$@"
}
dracut_instmods() {
local _silent=0;
local i;
[[ $no_kernel = yes ]] && return
for i in "$@"; do
[[ $i == "--silent" ]] && _silent=1
done
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@"
(($? != 0)) && (($_silent == 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" || :
}
inst_library() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -e $1 ]] || return 1 # no source
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_binary() {
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
}
inst_script() {
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
}
inst_fsck_help() {
local _helper="/run/dracut/fsck/fsck_help_$1.txt"
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper
(($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper || :
}
# Use with form hostonly="$(optional_hostonly)" inst_xxxx
# If hosotnly mode is set to "strict", hostonly restrictions will still
# be applied, else will ignore hostonly mode and try to install all
# given modules.
optional_hostonly() {
if [[ $hostonly_mode = "strict" ]]; then
printf -- "$hostonly"
else
printf ""
fi
}
mark_hostonly() {
for i in "$@"; do
echo "$i" >> "$initdir/lib/dracut/hostonly-files"
done
}
# find symlinks linked to given library file
# $1 = library file
# Function searches for symlinks by stripping version numbers appended to
# library filename, checks if it points to the same target and finally
# prints the list of symlinks to stdout.
#
# Example:
# rev_lib_symlinks libfoo.so.8.1
# output: libfoo.so.8 libfoo.so
# (Only if libfoo.so.8 and libfoo.so exists on host system.)
rev_lib_symlinks() {
[[ ! $1 ]] && return 0
local fn="$1" orig="$(readlink -f "$1")" links=''
[[ ${fn} == *.so.* ]] || return 1
until [[ ${fn##*.} == so ]]; do
fn="${fn%.*}"
[[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}"
done
echo "${links}"
}
# attempt to install any programs specified in a udev rule
inst_rule_programs() {
local _prog _bin
for _prog in $(sed -nr 's/.*PROGRAM==?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && inst_binary "$_bin"
done
for _prog in $(sed -nr 's/.*RUN[+=]=?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]] && [[ "${_prog}" != "/sbin/initqueue" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && inst_binary "$_bin"
done
for _prog in $(sed -nr 's/.*IMPORT\{program\}==?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && dracut_install "$_bin"
done
}
# attempt to install any programs specified in a udev rule
inst_rule_group_owner() {
local i
for i in $(sed -nr 's/.*OWNER=?"([^ "]+).*/\1/p' "$1"); do
if ! grep -Eq "^$i:" "$initdir/etc/passwd" 2>/dev/null; then
grep -E "^$i:" /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
fi
done
for i in $(sed -nr 's/.*GROUP=?"([^ "]+).*/\1/p' "$1"); do
if ! grep -Eq "^$i:" "$initdir/etc/group" 2>/dev/null; then
grep -E "^$i:" /etc/group 2>/dev/null >> "$initdir/etc/group"
fi
done
}
inst_rule_initqueue() {
if grep -q -F initqueue "$1"; then
dracut_need_initqueue
fi
}
# udev rules always get installed in the same place, so
# create a function to install them to make life simpler.
inst_rules() {
local _target=/etc/udev/rules.d _rule _found
inst_dir "${udevdir}/rules.d"
inst_dir "$_target"
for _rule in "$@"; do
if [ "${_rule#/}" = "$_rule" ]; then
for r in ${udevdir}/rules.d ${hostonly:+/etc/udev/rules.d}; do
[[ -e $r/$_rule ]] || continue
_found="$r/$_rule"
inst_rule_programs "$_found"
inst_rule_group_owner "$_found"
inst_rule_initqueue "$_found"
inst_simple "$_found"
done
fi
for r in '' $dracutbasedir/rules.d/; do
# skip rules without an absolute path
[[ "${r}$_rule" != /* ]] && continue
[[ -f ${r}$_rule ]] || continue
_found="${r}$_rule"
inst_rule_programs "$_found"
inst_rule_group_owner "$_found"
inst_rule_initqueue "$_found"
inst_simple "$_found" "$_target/${_found##*/}"
done
[[ $_found ]] || dinfo "Skipping udev rule: $_rule"
done
}
inst_rules_wildcard() {
local _target=/etc/udev/rules.d _rule _found
inst_dir "${udevdir}/rules.d"
inst_dir "$_target"
for _rule in ${udevdir}/rules.d/$1 ${dracutbasedir}/rules.d/$1 ; do
[[ -e $_rule ]] || continue
inst_rule_programs "$_rule"
inst_rule_group_owner "$_rule"
inst_rule_initqueue "$_rule"
inst_simple "$_rule"
_found=$_rule
done
if [[ -n ${hostonly} ]] ; then
for _rule in ${_target}/$1 ; do
[[ -f $_rule ]] || continue
inst_rule_programs "$_rule"
inst_rule_group_owner "$_rule"
inst_rule_initqueue "$_rule"
inst_simple "$_rule"
_found=$_rule
done
fi
[[ $_found ]] || dinfo "Skipping udev rule: $_rule"
}
# make sure that library links are correct and up to date
build_ld_cache() {
for f in "$dracutsysrootdir"/etc/ld.so.conf "$dracutsysrootdir"/etc/ld.so.conf.d/*; do
[[ -f $f ]] && inst_simple "${f#$dracutsysrootdir}"
done
if ! ldconfig -r "$initdir" -f /etc/ld.so.conf; then
if [[ $EUID == 0 ]]; then
derror "ldconfig exited ungracefully"
else
derror "ldconfig might need uid=0 (root) for chroot()"
fi
fi
}
prepare_udev_rules() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
for f in "$@"; do
f="${initdir}/etc/udev/rules.d/$f"
[ -e "$f" ] || continue
while read line || [ -n "$line" ]; do
if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then
if [ $UDEVVERSION -ge 174 ]; then
printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}"
else
printf '%sIMPORT{program}="path_id %%p"\n' "${line%%IMPORT PATH_ID}"
fi
elif [ "${line%%IMPORT BLKID}" != "$line" ]; then
if [ $UDEVVERSION -ge 176 ]; then
printf '%sIMPORT{builtin}="blkid"\n' "${line%%IMPORT BLKID}"
else
printf '%sIMPORT{program}="/sbin/blkid -o udev -p $tempnode"\n' "${line%%IMPORT BLKID}"
fi
else
echo "$line"
fi
done < "${f}" > "${f}.new"
mv "${f}.new" "$f"
done
}
# install function specialized for hooks
# $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook
# All hooks should be POSIX/SuS compliant, they will be sourced by init.
inst_hook() {
if ! [[ -f $3 ]]; then
dfatal "Cannot install a hook ($3) that does not exist."
dfatal "Aborting initrd creation."
exit 1
elif ! [[ "$hookdirs" == *$1* ]]; then
dfatal "No such hook type $1. Aborting initrd creation."
exit 1
fi
inst_simple "$3" "/lib/dracut/hooks/${1}/${2}-${3##*/}"
}
# install any of listed files
#
# If first argument is '-d' and second some destination path, first accessible
# source is installed into this path, otherwise it will installed in the same
# path as source. If none of listed files was installed, function return 1.
# On first successful installation it returns with 0 status.
#
# Example:
#
# inst_any -d /bin/foo /bin/bar /bin/baz
#
# Lets assume that /bin/baz exists, so it will be installed as /bin/foo in
# initramfs.
inst_any() {
local to f
[[ $1 = '-d' ]] && to="$2" && shift 2
for f in "$@"; do
[[ -e $f ]] || continue
[[ $to ]] && inst "$f" "$to" && return 0
inst "$f" && return 0
done
return 1
}
# inst_libdir_file [-n ] [...]
# Install a located on a lib directory to the initramfs image
# -n install matching files
inst_libdir_file() {
local _files
if [[ "$1" == "-n" ]]; then
local _pattern=$2
shift 2
for _dir in $libdirs; do
for _i in "$@"; do
for _f in "$_dir"/$_i; do
[[ "$_f" =~ $_pattern ]] || continue
[[ -e "$_f" ]] && _files+="$_f "
done
done
done
else
for _dir in $libdirs; do
for _i in "$@"; do
for _f in "$_dir"/$_i; do
[[ -e "$_f" ]] && _files+="$_f "
done
done
done
fi
[[ $_files ]] && inst_multiple $_files
}
# install function decompressing the target and handling symlinks
# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
#
# Function install targets in the same paths inside overlay but decompressed
# and without extensions (.gz, .bz2).
inst_decompress() {
local _src _cmd
for _src in $@
do
case ${_src} in
*.gz) _cmd='gzip -f -d' ;;
*.bz2) _cmd='bzip2 -d' ;;
*) return 1 ;;
esac
inst_simple ${_src}
# Decompress with chosen tool. We assume that tool changes name e.g.
# from 'name.gz' to 'name'.
${_cmd} "${initdir}${_src}"
done
}
# It's similar to above, but if file is not compressed, performs standard
# install.
# $@ = list of files
inst_opt_decompress() {
local _src
for _src in $@; do
inst_decompress "${_src}" || inst "${_src}"
done
}
# module_check
# execute the check() function of module-setup.sh of
# or the "check" script, if module-setup.sh is not found
# "check $hostonly" is called
module_check() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _forced=0
local _hostonly=$hostonly
[ $# -eq 2 ] && _forced=$2
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we are unconditionally included
[[ -x $_moddir/check ]] || return 0
[ $_forced -ne 0 ] && unset hostonly
$_moddir/check $hostonly
_ret=$?
else
unset check depends cmdline install installkernel
check() { true; }
. $_moddir/module-setup.sh
is_func check || return 0
[ $_forced -ne 0 ] && unset hostonly
moddir=$_moddir check $hostonly
_ret=$?
unset check depends cmdline install installkernel
fi
hostonly=$_hostonly
return $_ret
}
# module_check_mount
# execute the check() function of module-setup.sh of
# or the "check" script, if module-setup.sh is not found
# "mount_needs=1 check 0" is called
module_check_mount() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
mount_needs=1
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we are unconditionally included
[[ -x $_moddir/check ]] || return 0
mount_needs=1 $_moddir/check 0
_ret=$?
else
unset check depends cmdline install installkernel
check() { false; }
. $_moddir/module-setup.sh
moddir=$_moddir check 0
_ret=$?
unset check depends cmdline install installkernel
fi
unset mount_needs
return $_ret
}
# module_depends
# execute the depends() function of module-setup.sh of
# or the "depends" script, if module-setup.sh is not found
module_depends() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we have no deps
[[ -x $_moddir/check ]] || return 0
$_moddir/check -d
return $?
else
unset check depends cmdline install installkernel
depends() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir depends
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_cmdline
# execute the cmdline() function of module-setup.sh of
# or the "cmdline" script, if module-setup.sh is not found
module_cmdline() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/cmdline ]] && . "$_moddir/cmdline"
return $?
else
unset check depends cmdline install installkernel
cmdline() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir cmdline
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_install
# execute the install() function of module-setup.sh of
# or the "install" script, if module-setup.sh is not found
module_install() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/install ]] && . "$_moddir/install"
return $?
else
unset check depends cmdline install installkernel
install() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir install
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_installkernel
# execute the installkernel() function of module-setup.sh of
# or the "installkernel" script, if module-setup.sh is not found
module_installkernel() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel"
return $?
else
unset check depends cmdline install installkernel
installkernel() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir installkernel
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# check_mount
# check_mount checks, if a dracut module is needed for the given
# device and filesystem types in "${host_fs_types[@]}"
check_mount() {
local _mod=$1
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _moddep
[ "${#host_fs_types[@]}" -le 0 ] && return 1
# If we are already scheduled to be loaded, no need to check again.
[[ " $mods_to_load " == *\ $_mod\ * ]] && return 0
[[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1
# This should never happen, but...
[[ -d $_moddir ]] || return 1
[[ $2 ]] || mods_checked_as_dep+=" $_mod "
if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then
return 1
fi
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
module_check_mount $_mod; ret=$?
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
else
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
module_check_mount $_mod || return 1
else
# skip this module
return 1
fi
fi
for _moddep in $(module_depends $_mod); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
&& dracutmodules+=" $_moddep "
[[ " $add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
&& add_dracutmodules+=" $_moddep "
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
&& force_add_dracutmodules+=" $_moddep "
# if a module we depend on fail, fail also
if ! check_module $_moddep; then
derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
return 1
fi
done
[[ " $mods_to_load " == *\ $_mod\ * ]] || \
mods_to_load+=" $_mod "
return 0
}
# check_module []
# check if a dracut module is to be used in the initramfs process
# if is set, then the process also keeps track
# that the modules were checked for the dependency tracking process
check_module() {
local _mod=$1
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _moddep
# If we are already scheduled to be loaded, no need to check again.
[[ " $mods_to_load " == *\ $_mod\ * ]] && return 0
[[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1
# This should never happen, but...
[[ -d $_moddir ]] || return 1
[[ $2 ]] || mods_checked_as_dep+=" $_mod "
if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then
dinfo "dracut module '$_mod' will not be installed, because it's in the list to be omitted!"
return 1
fi
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
module_check $_mod 1; ret=$?
else
module_check $_mod 0; ret=$?
fi
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
else
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
module_check $_mod; ret=$?
if [[ $ret != 0 ]]; then
[[ $2 ]] && return 1
[[ $ret != 255 ]] && return 1
fi
else
# skip this module
return 1
fi
fi
for _moddep in $(module_depends $_mod); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
&& dracutmodules+=" $_moddep "
[[ " $add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
&& add_dracutmodules+=" $_moddep "
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
&& force_add_dracutmodules+=" $_moddep "
# if a module we depend on fail, fail also
if ! check_module $_moddep; then
derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
return 1
fi
done
[[ " $mods_to_load " == *\ $_mod\ * ]] || \
mods_to_load+=" $_mod "
return 0
}
# for_each_module_dir
# execute " 1"
for_each_module_dir() {
local _modcheck
local _mod
local _moddir
local _func
_func=$1
for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
[[ -d $_moddir ]] || continue;
[[ -e $_moddir/install || -e $_moddir/installkernel || \
-e $_moddir/module-setup.sh ]] || continue
_mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]}
$_func $_mod 1
done
# Report any missing dracut modules, the user has specified
_modcheck="$add_dracutmodules $force_add_dracutmodules"
[[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules"
for _mod in $_modcheck; do
[[ " $mods_to_load " == *\ $_mod\ * ]] && continue
[[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_mod\ * ]] \
&& [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \
&& continue
derror "dracut module '$_mod' cannot be found or installed."
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1
[[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1
[[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1
done
}
# Install a single kernel module along with any firmware it may require.
# $1 = full path to kernel module to install
install_kmod_with_fw() {
# no need to go further if the module is already installed
[[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \
&& return 0
if [[ $omit_drivers ]]; then
local _kmod=${1##*/}
_kmod=${_kmod%.ko*}
_kmod=${_kmod/-/_}
if [[ "$_kmod" =~ $omit_drivers ]]; then
dinfo "Omitting driver $_kmod"
return 0
fi
if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then
dinfo "Omitting driver $_kmod"
return 0
fi
fi
if [[ $silent_omit_drivers ]]; then
local _kmod=${1##*/}
_kmod=${_kmod%.ko*}
_kmod=${_kmod/-/_}
[[ "$_kmod" =~ $silent_omit_drivers ]] && return 0
[[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0
fi
inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}"
ret=$?
(($ret != 0)) && return $ret
local _modname=${1##*/} _fwdir _found _fw
_modname=${_modname%.ko*}
for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
_found=''
for _fwdir in $fw_dir; do
[[ -d $_fwdir && -f $_fwdir/$_fw ]] || continue
inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw"
_found=yes
done
if [[ $_found != yes ]]; then
if ! [[ -d $(echo /sys/module/${_modname//-/_}|{ read a b; echo $a; }) ]]; then
dinfo "Possible missing firmware \"${_fw}\" for kernel module" \
"\"${_modname}.ko\""
else
dwarn "Possible missing firmware \"${_fw}\" for kernel module" \
"\"${_modname}.ko\""
fi
fi
done
return 0
}
# Do something with all the dependencies of a kernel module.
# Note that kernel modules depend on themselves using the technique we use
# $1 = function to call for each dependency we find
# It will be passed the full path to the found kernel module
# $2 = module to get dependencies for
# rest of args = arguments to modprobe
# _fderr specifies FD passed from surrounding scope
for_each_kmod_dep() {
local _func=$1 _kmod=$2 _cmd _modpath _options
shift 2
modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | (
while read _cmd _modpath _options || [ -n "$_cmd" ]; do
[[ $_cmd = insmod ]] || continue
$_func ${_modpath} || exit $?
done
)
}
dracut_kernel_post() {
for _f in modules.builtin.bin modules.builtin modules.order; do
[[ -e $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
done
# generate module dependencies for the initrd
if [[ -d $initdir/lib/modules/$kernel ]] && \
! depmod -a -b "$initdir" $kernel; then
dfatal "\"depmod -a $kernel\" failed."
exit 1
fi
}
instmods() {
# instmods [-c [-s]] [ ... ]
# instmods [-c [-s]]
# install kernel modules along with all their dependencies.
# can be e.g. "=block" or "=drivers/usb/storage"
# -c check
# -s silent
local _optional="-o"
local _silent
local _ret
[[ $no_kernel = yes ]] && return
if [[ $1 = '-c' ]]; then
unset _optional
shift
fi
if [[ $1 = '-s' ]]; then
_silent=1
shift
fi
if (($# == 0)); then
read -r -d '' -a args
set -- "${args[@]}"
fi
if (($# == 0)); then
return 0
fi
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} \
${loginstall:+-L "$loginstall"} \
${hostonly:+-H} \
${omit_drivers:+-N "$omit_drivers"} \
${srcmods:+--kerneldir "$srcmods"} \
${_optional:+-o} \
${_silent:+--silent} \
-m "$@"
_ret=$?
if (($_ret != 0)) && [[ -z "$_silent" ]]; then
derror "FAILED: " \
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} \
${loginstall:+-L "$loginstall"} \
${hostonly:+-H} \
${omit_drivers:+-N "$omit_drivers"} \
${srcmods:+--kerneldir "$srcmods"} \
${_optional:+-o} \
${_silent:+--silent} \
-m "$@"
fi
[[ "$optional" ]] && return 0
return $_ret
}
if [[ "$(ln --help)" == *--relative* ]]; then
ln_r() {
ln -sfnr "${initdir}/$1" "${initdir}/$2"
}
else
ln_r() {
local _source=$1
local _dest=$2
[[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/}
ln -sfn -- "$(convert_abs_rel "${_dest}" "${_source}")" "${initdir}/${_dest}"
}
fi
dracut-install 0000755 00000224160 15262675530 0007440 0 ustar 00 ELF > P> @ 0 @ 8 @ ! @ @ @ ! ! p x
!
! D D ! ! Std Ptd 4 4 4 d d Qtd Rtd ! ! P P /lib64/ld-linux-x86-64.so.2 GNU GNU GNU | ),(U. j j l bAPv2 r c 8 D 7 x ? K ! % g # > > Y L j F 9 7 " . I
T = . ` x E T g i n i S 0 ~ S ( $ * ! ! K ! (! \ 0! libkmod.so.2 __gmon_start__ _ITM_deregisterTMCloneTable _ITM_registerTMCloneTable kmod_module_get_module kmod_module_dependency_symbol_get_symbol kmod_get_dirname kmod_unref kmod_module_new_from_loaded kmod_module_new_from_lookup kmod_module_get_name kmod_module_get_softdeps kmod_list_next kmod_module_info_get_key kmod_module_unref_list kmod_module_get_info kmod_module_info_free_list kmod_module_get_dependency_symbols kmod_module_unref kmod_module_get_dependencies kmod_module_dependency_symbols_free_list kmod_module_get_path kmod_module_new_from_path kmod_module_info_get_value kmod_module_symbol_get_symbol kmod_new libgcc_s.so.1 _Unwind_Resume __gcc_personality_v0 libc.so.6 __xpg_basename strcpy __printf_chk fopen strncmp optind regexec __open64_2 puts fork futimes __stack_chk_fail __lxstat unlink mkdir realloc abort _exit memchr strpbrk popen getpid strspn strdup fts_close isatty feof symlink execlp fgets calloc strlen writev strstr strcspn __errno_location memcmp strndup __fprintf_chk fchown fts_read memcpy fclose __vsnprintf_chk strtoul malloc umask realpath __ctype_b_loc getenv fts_set regcomp optarg ioctl __snprintf_chk getopt_long pclose usleep __getdelim geteuid waitpid strchr program_invocation_short_name qsort __cxa_finalize syscall fts_open __xstat uname strcmp strerror __asprintf_chk __libc_start_main stpcpy sysconf free __progname GCC_3.0 GCC_3.3.1 GLIBC_2.14 GLIBC_2.4 GLIBC_2.7 GLIBC_2.3 GLIBC_2.8 GLIBC_2.3.4 GLIBC_2.2.5 LIBKMOD_22 LIBKMOD_5
p 0 P&y V a_& ^ h ii
s ii
} ii
ii
ti ui "&
j ! 0? ! > ! ! ! ! ! S @! `!
! ! ! " ! + ! 4 ! 8 @! ? `! D ! P ! W ! g ! y ! ! @ ! A ` ! ! ! !
! 9
! E
! J @
! = H
! N P
! T X
! Y `
! ] h
! e p
! l x
! ! ! ! # ! * ! 1 ! ! k (! l 0! m ! ! ! ! ! ! ! ! !
! !
!
!
!
!
! (
! 0
! 8
! @
! H
! P
! X
! `
! h
! p
! x
!
!
!
! !
! "
! $
! %
! &
! '
! (
! )
! +
! ,
! -
! .
! /
! 0 ! 1 ! 2 ! 3 ! 4 ! 5 (! 6 0! 7 8! 8 @! 9 H! : P! ; X! < `! = h! > p! ? x! @ ! A ! B ! C ! D ! E ! F ! G ! H ! I ! J ! K ! L ! M ! N ! O ! P ! Q ! R ! S ! T ! U (! V 0! W 8! X @! Y H! Z P! [ X! \ `! ] h! ^ p! _ x! ` ! a ! b ! c ! d ! e ! f ! g ! h ! i HHy HtH 52 %3 h h h h h h h h q h a h Q h
A h 1 h ! h
h h h h h h h h h h q h a h Q h A h 1 h ! h h h h h! h" h# h$ h% h& h' q h( a h) Q h* A h+ 1 h, ! h- h. h/ h0 h1 h2 h3 h4 h5 h6 h7 q h8 a h9 Q h: A h; 1 h< ! h= h> h? h@ hA hB hC hD hE hF hG q hH a hI Q hJ A hK 1 hL ! hM hN hO hP hQ hR hS hT hU hV hW q hX a hY Q hZ A h[ 1 h\ ! h] h^ h_ h` ha hb hc % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D E1H|$Ht.MtLMtLDH, H HH|$HtLHH|$HH?H<$fH H1HHDH8HHHDž HLHHLLA詁 AtD蛁 LpA IHDž KHE E1E1LHEH}{LsLkH}bHEIH}RHtHLH}9H HHE E1E1HE E1E1uHE E1E1bD躀 HE E1E1E In1gH}H}LH}HH(H HtH1H}HtH}HtHtHHEHtHL1 I1 I I1H}HtKH}Ht=HtH0LH11111111H}Ht
I1 I I1 I1v1o1h1a1Z1S1L1E1>17101)1" HHH HLH_HDžP HPHHtH@HtH3E1LHHt H HHDžP HDžP HDžP sHDžP cHDžP SE10L#HH] HDžP E1BE1:LHH1HH6f D AWAVAUATIUSH(dH%( HD$1t , 1%g i = e L5S L-S LLS =` H tQH== 1vHH HD$ H\$ HH= 1HZ Hu1H= HH IL 1 H
> H5& "d HH5C o H 2H HL ; C H5 Hj 1HHY H H@LLR LLH R H= H H H= H HtPvHH AH= 1 H= H5 H H; Lc- EuLA9}EJ H5 M<H$I?u"AEH$9 AM9u
IDI)݀=N ,$ =< =2 $ I/ O4OdLhH
LLA @ Åt<= u@PH
K MAVL 1H5 a ZY= 1 c HL$dH3 %( H([]A\A]A^A_H= H+ H 8 HH
HL H
g 1 H5H ?a H=( Ht @ HH=i Y Hu
D HH=Y Y Hu
D HpH=1 Y HuH=( SQ H= GQ H= ;Q H=< /H= f H= f O$E11J
LA HI` Lt
= AID94$5M $X 1L H
͝ H5 _ M,$/ LLHe HD$HtL|$1
I M/M M` 1L+ H
Y H5 _
LL A v ŅuMc 1L H
H56 7_ nM $q 1LD H
ܜ H5 _ H|$Te Iٺ L H
ߝ H5DŽ ^ K49 H== 1H1O,E1HHHHVMu IH= LQ HtLH?t$LH= HHO Li! AID9<$7Me 1 H5 L{ MH
՛ ] H5 LH[MZD L
1 L
H
H5 ] \L H$H\L<$1L-f
I I/H AQMIH
AV< H5> 1 8] AZA A[
LH% ÅuVL؆ IAVH
? 1H5 \ _AXdH<$2c La 1 H
H5 \ HL
H
H5s 1r\ L4 H
` H5C D\ z Ls H
7 H H H 1I^HHPTL H
/ H=R H= H H9tH> Ht H=i H5b H)HHH?HHtH Htf D == u+UH= Ht H= Id ] w Ht;SHHHu* HHt</HBu|/tH[f11[f AW1Ҿ AVAUATUSHH H<$H|$ dH%( H$8 1Hi HD$ HD$ HD$( yHIHb HL$Lt$0HL$f D Hxp HD$ H5 Hx(H5 IH[ H¾ LHb L
H!%t DHJHDщ HL)" H|0
uD0 HT$H<$LH\$ Htc H0HIHLHrH= HHJ H|$HcHHuH|$HtLdLHH<$Ht$EÅ Ld$Ll$LM D HD$ LHH$H H= H55| a H~ H= Hy H$ dH3 %( HĐ []A\W LH={ 1J -H5f H=
E} ` H5: H=^ 6 H5 H=* a\ UH5 H=r m )H5b H= A= Z H=6 H H= H H= = u!= t
H=y t 9tntj H=z HHJ ILy 1 H
H5y S H5y H_ H 1Ly H
q 1 H5]y YS HHtH H L
L H
H5 y 1R EL
LJ H
֑ L
L. H
L
Lچ H
L
u L H
k L 1 H
c H5Vx WR ff. fAVAUATUSL$ H H $ L9uH dH%( H$@ 1HHIHD$ HH H1HID IH LWIULD H9v+A8/u%JT-Hf Hz/uIH9u1H|$L Hw # H|$D$ Hw1f D /HHVuDE} HsDE1f /HIVuM A8D 1E1:uHHt2H* IMPH
y H5r 1 L XZHuH $H$ dH3%( HuFHĸ []A\A]A^A_1Կ Lr 1 H
H5Or PL =4 SHu=( uR [ E111HH= uIٺ L H
H5q K 1[ E111HH= tIٺ 1L H
a H5q K 1[Ð UH0r H SHH
dH%( HD$1HH$ H<$H5r HHtHHH 1Hq HoH<$HD$dH3%( u:H[] L $M 1L9 H
H5p J gL)q H
ɉ 1F H5p J H H f D SHHH=> 1Hq +x[ D H5 I1Y L H
H5o I XZ[f UIHAWELp AVAUATI SH0 Hq H
dH%( HE1VH5o HDž I H= XLZ@Ań% EtHH= LL L> I HHH H=Z HH?: H1HHKo 9/LH
Z 1{ HL o H8H{ HH[HH # At
(% = @ 2 = It' = tH1L3 DLuo 1H
D H5m G HM1LXo H
H5m G = _AXt= u H= LDž H0L h H% = R L1c5 H L1 :AŅ Ǿ @1k PLDtKPDt4ML4n H
H5Nl JF HxDHHDž HDž HHEH DZ^ DR^ D A D Lt( Ll H
1 H5k E 1E1H HDH]dH3 %( He[A\A]A^A_]f. Mt 1Lz H
H5k E 1A D IRLz H
j 1 H5j D L A1E LLk 1H
! y H5j D f D HIك8 Lk H
߂ 1 H5Sj OD HH HHHA 1ɺ H` HDL *\ f. {ADžV L H8 1LDxDLk 1H
K H5Vi RC DDuH=* tLE 1Lj H
H5i C fILi 1 H
` H5h B fLhH= HH4 Li H
1 H5h B HDž HA LLi 1H
H57h 3B H Af. 1L&IH E1HHa LL :ADž[ HL 1H
2 HDž HA} /Hg MD 1( LHL
HIH1AV Lh H
H5g A HA[LXr H~Hr= L]E DžumHMLv D AVH
~ H5f @ XZM 1Lg H
~ H5Of P@ A p D HMLv 1AVH
H~ G H5f @ XZf. L( D LL"g 1H
I~ H5e ? (H@5AIٺ 1Lu H
} H5se t? AM 1Lf H
} H5:e ;? W fH1Le
;HL1Lf AVH
c} H5d > AYAZLAe H
9} 1 H5d > ! H5d 1> 8Ld H
| 1 H5`d \> u@VH5Ff L
f j Lqt HH
f AVHf ATH QH5f 1L
e j Le HH
e AVHe ATH I+ I0 I@ I' IM I I2 I | u j I U L C : I % Iff. UHAWAVAUATSHXH} dH%( HE1HE HE 2HEH H}H5d 5HH HM1H} Hd H}H5;e FHHEE HEHEHE @ HP HuH}Hٺ
H~LM 1LAd H
z H5a ; HEH5r HInH H5d LVH- H5d L>H H5d L&H H5d LH H5 d LH H5d LH H5d LH H5 LIH H5c L/ HIDHIH <
L
t Hu L A 11HHIHEpE= HuMZ Loq H
xx 1H5$` %: XZL}H5Cc LHt!@ A 11LLZ H}qLyHHEMIH! HYHI.IHB H:HIHEH HHEH H}LaLI
H=}b LeHH} ME 1H5Sc HL1*V A 11HHI: H5 b LH @ A 11LL LM 1La H
v H5^ 8 M 1Lb H
v H5h^ i8 E D H}HtH*H}EH]dH3 %( He[A\A]A^A_] @ LM\ 1La H
:v H5] 7 f E1LeH}\LTLLH}CMM E1HE E1LMf 1L` H
u H5e] f7 wE1HE sH} 1Aąx H}ILA H/\ 1 h 1H}ILH\ CLX H
p 15 H5YX U2 &LX H
mp 1# H51X -2 s 1LX H
)p 1) H5W 1 LYX H
p 1/ H5W 1 H UHAWAVH AUATSH HdH%( HE1HDž Å< L Mw L0 @ H LyIH LHǹ H5Z uLIILZ 1H
n H5V 0 H P H% H; Dž L({f. H(A 11H H(u.I L!Z H
kn H5NV O0 H(H H; 1MHV LHDž( H & H(L DL(L^V 1H
m H5U / cf ZHHMLg PH
m H5nU 1 h/ XZ1H Ht HMdH3 %( He[A\A]A^A_]ÉHIHI1 AWLRf H
m H5T . ^_1LLU H
l 1 H5T . U H Hff. fUHAWAVAUATSHHdH%( HE1H_ HEIIE1HEHEL=K HE LHHE̿HHp H=a H H=R HB H}Y=ʣ tE111HL~ H57 11HA HAH HE HILGW PH
Yk H5\S 1 HE HE F- H}Y^H}HHAƅ H}HtH}HtHtHӿH}HtLLIHHMdH3 %( D He[A\A]A^A_]f HEHtHfHIL:d PH
ej H5hR 1 b, XZh HUHuH}臾Aƅ H}H}AEDD H}AH70- E1"蛿 I I5 4 I I I @ UHAWAVAUATISH(dH%( HE1HE HE ؼ=I H = LHH H=x H H=i H 1E1H}HtƽH}Ht踽HtH諽HMdH3 %( D He[A\A]A^A_]f D H= HaNIٺ) 1Lkb H
i H5_P `* b H =; HE =% H HILS H
h < HH5O P1) H5o XA 1ZH1HAƅ =e 1ۀ=U L!ILS 1C H
1h H5|O x) 1}HuL$< HE=J I? H L5 f D H}LdIH L耻E111HLI軹uLoHI1 AUL(a H
ag H5N ( _H}AXHt 蟼 Iٺ8 1LBa H
3g H5~N ( 1A ~fE111HH=o
Iٺ$ 1L` H
f H5(N )( + @ L9` H
f 1 H5M ' HE= I MLŻLHILxQ 1@ H
Xf H5M ' LLHHAƅHUHuL詹AƅjH}H}AEAEAFf. HEIMxLk HEIǀ= MKL5| f. H}LIHtL4E111HLIouL#HI1 AUL _ H
e H5sL t& H}Y^H?P5 1AWAL=3 ٹ I颾 Iɾ I I鹾 I鱾 I驾 I顾 I陾 I鑾 H鉾 I I I闾 I钾 } ` I{ Iv Iq Il Ig Ib I] IX IS IU UHAWAVI1AUAATSH H=] dH%( HE1HDžx ~HI3H5N HHQHt
H)H
= 1 E AELhIDE1HHHH`HxHXHhLoN 1H
b H5
J L $ H 뿀=m =_ dAVMLQ 1SH
}W H5> JL
HHHh LQ H
+W H5>> L15 >苫8 H@HtH H蒩H膩HzwATML1Q 1SH
V H5= ^_HhAPM LA H
sV 0H5= 1~ ^_L^B H
IV 1 H5U= Q *= t
Hh LOB H
U H5= L1 貪Lt= H
U 1. H5< "LD= H
U 1( H5< L = H
|U 14 H5< H Hׯ ˯ H H( HŰ H Hѯ H( H) H* H. H) H- H) H* 齯 H8 H3 H/f. D f 1H9Bff. HHtwH HN HF(HtAHA(HF(Ht=HH HNHFHtHAHFHt&HHG tkG HHGHuHOHL( H
T H5S H=@ A H
T H5S H=X ! H
T H5S H=S HHtH HD(HHF HVHHtHrH0HGHF HF(Ht$H Hp G HwtkHf D H Hw H
S H5S H=? Y f H
S H5R H=W 1 H
S H5R H=R H
yS H5R H=R H
YS H5{R H=R ATUSHHt$P H9szJHHrH H[]A\ @ HI * H1H|HH!HGHH耣HtI$X @ HI$f. ɸ Bȉff. ATUSHtGHIH\(Hu# H[HtLH;UuH[]A\f1H[]A\f D H
IR ( H5[Q H=;> USHHtuHH HH>U HHiHΉH )H))Љ}$ tHr H k HH[]ÐHH[]2fH
Q H5P H== H
Q H5P H=U SHwHHt H(HsHu{$ tH H H[f D H[駢 tHu 鷤 ATUHSH=* AĄ Hk H HHX HzH1H Hǂ HH) HHHB HDHHHB HDHB HH*HZDb$[]A\ @ H=܇ HHk1[H]A\f HHk1А SHHt3H? t
1[f HHHHu[f D H
O H5N H=; Htfff. @ HtGUSHHHwHt"HnH HtH謠HsHuHH[] D ff. @ Ht/SHwHHtf. HHsHu[ D AUATUSHH IHHIAU LHiHډH )))HƉHt!L9` EH[]A\A] D A}$ t9H5҅ HtmHHÅ H.LLfH []A\A]f0 膞HHu˸ H
M 6 H5L H=9 A 0 H=\ _Hf. ATUSHtkHHHIU HHiHщH ))H)ȉHtHL`1[]A\LHH[]A\nf D H
M V H53L H=9 f HtgUHSHHHH߉HiH IȉD)D))HHtH@H[] H1[] 1ff. f USHHtaHHHHiHωH )H))HHt HhHHHH[] 1HH[] @ H AWAVIAUIATIHUHSHA$LHiH )))HƉIHtxLA$LHiHH )))LƉHu#LLM/LMwL1H[]A\A]A^A_ú H AWAVIAUIATIHUHSHA$LHiH )))HƉIH LA$LHiHH )))LƉHtI9t HL'LLM/LMwL1H[]A\A]A^A_ø HtwATIUHHSHU HiHωH )H))L#Ht H9XuHH}H[]A\ D [1]A\f 1ff. f HtgHtJHHtAHt,HH HHHDHHtHH
H@ HGHu H1HtH fHH
H H5H H=JH m
ff. f HtWHt:HHt2Ht HH(HHtHH
H@ D HGHu H 1HtH fHH
%H H5G H=G ff. f HtgATIUHHSHU HHiH IȉD)D))LaHt H[H@]A\[1]A\f 1ff. f HtHGHtH@f 1ff. f HtHGHtH f. 1ff. f HtHGHtH@f 1ff. f SHt HwHtH^H[ 1H[Ð SHtHwHt
H H[1H[f HtG 1ff. f HtG f D f USHHtAHt-H^HHt!HSH3Htx H[ Hu1H[]f D H
E v H5[E H=;2 AVAUATUSH IH LvHM I>Mf U HHiH )))IƉ HuEI>AU LHiHΉH )L))Љ!LHMMp[]A\A]A^ H
D H5cD H=C1 f H AVIAUIATIUSH HAU LHiH )))LƉ2H LA$LHiHH )))LƉIHt^HƉLLL1[]A\A]A^f1 D H
C H5cC H=C0 f 뾸f USHHt1HwHH?"HHtHHOx+HH[]ÐH
9C H5B H=/ A H1F @ AVAUATIUSHdH%( HD$1G xHHHtPI1LH$ LHtY @ 1LLHDLcHHuJD H HL$dH3 %( HuH[]A\A]A^f D H薖f D AWAVAUATUSHhdH%( HD$X1= HIL5C L-n) H H5F H耕H\ ; H5fF H1ђHt HhD=x ExfHL4$AD$AD$(AD$8ID$H HD$ H\$谓 LDHD$Ll$ HD$( =HL? =1HL$XdH3 %( uHh[]A\A]A^A_Zf. AWIAVAAUIATUSH( HL$Hl$dH%( H$ 1ĔLL$MH D Hþ HDLƄ$ ID#H$ dH3 %( uH( []A\A]A^A_謔ff. UIH=x S1HHQ R V rH HHx z a S ]v x
謑t[ D 9v [ ff. @ f. ff. ;=u H~ 1f LLHbf H ILL$Ht7)D$P)L$`)T$p)$ )$ )$ )$ )$ dH%( HD$1H$ $( HD$HD$ HD$1;=Cu D$0 ~ HL$dH3 %( u H D HLLff. t S1ۅx[ 3tt [þ H=n? t x-L@ H
A 1I H5P? D ؉_E L? H
LA IH5? 1 Ht \ff. PXL? Hjf. PXH
@ \ H5> H=> Hff. 9u s @ Hff. @ PXL? Hf. Hx/=} H @ H
!@ H5$> H=C> !H
@ H5> H=/> Hs xu s 1H } D r D wHcHl H 1ff. f AUL-sl ATIH=V= US1HdH%( HD$1D$ Mu`I| Ht L|t*HH uHt$LQ xLl$GHT$dH3%( u2H[]A\A]ÐH
> % H5< H=& Տ D H#x81HÐf SH=< HtHHxUH=< HHt H8x[fIL= [H
= H5 < 1vIٺ
1LH= H
= H5; Mf. H6H?UHSHH?HtH @ 裌HH;HuHH[]鉌f 1H? t HH? ufff. @ ATUSHtSHHt;H/IHu#f D Ht"H+HtLH_uH[]A\ 1[H]A\f D H
> H5= H=& AUATUSHHtmHHtUH/Ht=HI貋I D Ht2H+HtLLH|uHLtHH[]A\A]fH1[H]A\A]H
I= , H5n< H=& 1 Htbfff. @ ATUSHtkH{xHIHt=H;HHu Wf. HH;HHt=ˌHE HuLE1[]LA\ 螉HHtIHE L[]A\ Htf1ff. f ATUSH dH%( HD$1HK o1HIH$HNxHL$%f D Hʉ$HHt*HNj$/vHT$HBHD$HHuHʈHH I L謋HH A f. E /w7HUE H:Ht7HtiDHHt]E A/vHUHBHEH:HuJH Ht$dH34%( HuEH []A\f D E1x H(1 @ HHu1 D H Ht$(HT$0HL$8LD$@LL$Ht7)D$P)L$`)T$p)$ )$ )$ )$ )$ dH%( HD$1H$ H$ HD$HD$ D$0 HD$HT$dH3%( uH &f D AUATIUSHH HH UHK|HΆIHt?H} HHu] HH} HHtD蚉HHuLE1HL[]A\A]f kHHtHII<$HuH HL[]A\A] D HH[]A\A]f D AVAUATUHSH HIIjH HW|HڅIHt8H} HHuT @ HH} HHt?誈HHuLE1[]LA\A]A^ L HHtHII<$HuH L[]A\A]A^ @ xHDHHtI []A\A]A^ AWAVAUATUSH(dH%( HD$1H Ll$L|$IHLLHHD$ H 1DLLLHDsx Hu{H藄IHtkLLLHHD$ E H 1! LLLH HtGHt$HIHuLE1THL$dH3 %( LuPH([]A\A]A^A_fIH H
6 H55 H= *L̆ff. AWAVAUATUSH(dH%( HD$1H Ld$Lt$HHD$ LL H 1
DLLDkHk Hu{H*IHtgLLHHD$ ; H 1 f D LLH HtRHt$HM| IHuLE1HL$dH3 %( LuWH([]A\A]A^A_f ID H fH
95 H54 H=< Q 'L\ff. USHHtQH55 HHt.Ht"H,H} Ht? u
HE HH[] D H
y4 . H53 H= AWAVAUATUHSHH HI藂IH Lm I1LMu z I<$HtJ;HHEWHIuH{EHH Hf D LhHHt?Lm Mt6HH9tHLCHο HHtKHf HH[]A\A]A^A_ A L50 " 謀HHHu1ff. f AUIATUSHH HH xHYIHt:H;HHuD @ HH;HHt0+HE HuLE1GHL[]A\A]f LHE HtHE HL[]A\A]f H[]A\A]HL11[]A\A]f. HtWATUHSHHHtMHpAHH諃Ht8DH AT$H HE 1[]A\ 1 D E1뻸 UHHSHHt1HHH\xH[]ÐH߉D$ D$ H[]øf Ht D 1ff. f AVIAUATUSHtdIHtlH IHHuD @ HI $IH] Ht+LH蠁uHH@H] Hu I$ [L]A\A]A^ @ H
0 H560 H= f UHSHHt'H7Ht H H3HtHH HuHH[]ff. f AWIAVAUATUSHHtpIHt~H IHHu"Qf D It2HHW~H] Ht1LV~LHHI5}tHI IH] HuI HL[]A\A]A^A_ @ H
y/ H5 / H= AWAVAUATUSHHHu H= HT H,3HE1 H9v8 A~u AVAHH9u|3 H$H E1H9w8 f D HHHT$H)-HT$HItFHZAH9vwI1HI)LP{H $HDL SDRЉA DRA@ A7ACDSEZDA EZA A AJɅ HH ʈPA HH) HH HH
HH
HH HH HH HH \HHD[DA0Dڃ0 kA00~ 0ExvxrAAHHE D @hL 'HH9 "HH) \H L[]A\A]A^f. E1[]LA\A]A^Ð \HHH D L`oHtI 0' \x HHfPf. H
$ H5 " H= AJ
AJWf D 1 D AVAUATUSH IH HH HH5! HHDHpH3@ @'tUIL-! @" @\ LpHu
IA6@uLH)I$HLu []A\A]A^fSHsHu)H1Cf. ' PHHt HȀ\ux PHHuHH)I$9HHHHM []A\A]A^f A~ 3 AvIFI@ ? CHK! H<\tQ<"tfHBRt\t?"t HuHH)I4$8HHHE H[]A\A]A^ HЀx HP@uHHH) @ 1H[]A\A]A^f. H
a" H5 H= H
A" H5 H= H
!" H5 H= aHHH)I HHH H1ff. f AUATUSHHHHD߀; tC? t>IHHHIZnLHHoIE HHE HH[]A\A] H1H[]A\A] G< v%G<vG<w'@G @G@G f. G<w
@G D f AWIAVIAUAATL%F UH-F SL)HocHt 1 LLDAHH9uH[]A\A]A^A_ff. HH /sys/devices modalias install/dracut-install.c 2 madfhlL:oD:HRp:P:s:S:N: DRACUT_FIRMWARE_PATH DRACUT_FIRMWARE_PATH=%s No SOURCE argument given %s/%s Out of memory! stat(%s) != 0 find_binary(%s) == %s %s/lib/dracut/hostonly-files a %s
dracut_install('%s', '%s') hash hit items for '%s' ERROR: stat '%s': %m '%s' already exists dest dir '%s' does not exist mkdir '%s' '%s' install error lstat '%s': %m ln -s '%s' '%s' ERROR: ln -s '%s' '%s': %m dracut_install ret = %d cp '%s' '%s' Failed to chown %s: %m -fL --sparse=auto --reflink=auto cp --preserve=mode,timestamps cp ret = %d .so Script install: '%s' ERROR: failed to install '%s' ldd %s 2>&1 ldd: '%s' Not a valid dynamic program cannot execute binary file not a dynamic executable loader cannot load itself not regular file cannot read header cannot be preloaded => Lib install: '%s' .so. glibc-hwcaps /lib/fipscheck /lib64/fipscheck /lib/hmaccalc /lib64/hmaccalc %s/.%s.hmac %s/%s.hmac hmac cp '%s' '%s') firmware Firmware %s dracut_install '%s' OK dracut_install '%s' '%s' OK dracut_install '%s' '%s' dracut_install '%s' ERROR /lib/modules/ DRACUT_KERNEL_MODALIASES Handle module '%s' Failed to find module '%s' %s ERROR: installing module '%s' Handling =%s %s/kernel/%s %s/extra/%s %s/updates/%s Skipping %s Ignoring %s Handling %s FTS ERROR: %m .ko .ko.xz .ko.gz Failed to find module '%s' ERROR: installing '%s' PATH is not set DESTROOTDIR Out of memory %s/%d.log resolve_deps('%s') Handle '%s' dracut_install '%s' help version debug verbose ldd resolvelazy optional hostonly all module fips destrootdir logdir mod-filter-path mod-filter-nopath mod-filter-symbol mod-filter-nosymbol mod-filter-noname silent kerneldir firmwaredirs Could not get list of loaded modules: %m. Switching to non-hostonly mode. Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...
or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST
or: %s -D DESTROOTDIR [OPTION]... -m KERNELMODULE [KERNELMODULE …]
Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.
KERNELMODULE can have the format:
with a leading /
=[/…] like '=drivers/hid'
-D --destrootdir Install all files to DESTROOTDIR as the root
-a --all Install all SOURCE arguments to DESTROOTDIR
-o --optional If SOURCE does not exist, do not fail
-d --dir SOURCE is a directory
-l --ldd Also install shebang executables and libraries
-L --logdir Log files, which were installed from the host to
-R --resolvelazy Only install shebang executables and libraries
for all SOURCE files
-H --hostonly Mark all SOURCE files as hostonly
-f --fips Also install all '.SOURCE.hmac' files
--module,-m Install kernel modules, instead of files
--kerneldir Specify the kernel module directory
--firmwaredirs Specify the firmware directory search path with : separation
--silent Don't display error messages for kernel module install
--modalias Only generate module list from /sys/devices modalias list
-o --optional If kernel module does not exist, do not fail
-p --mod-filter-path Filter kernel modules by path regexp
-P --mod-filter-nopath Exclude kernel modules by path regexp
-s --mod-filter-symbol Filter kernel modules by symbol regexp
-S --mod-filter-nosymbol Exclude kernel modules by symbol regexp
-N --mod-filter-noname Exclude kernel modules by name regexp
-v --verbose Show more output
--debug Show debug output
--version Show package version
-h --help Show this help
Module path filter %s is not a regular expression Module symbol filter %s is not a regular expression Environment variable DRACUT_FIRMWARE_PATH is not set convert_abs_rel(): target '%s' directory has no realpath. Path %s matched exclusion filter Path %s matched inclusion filter Could not open '%s' for writing. Could not append '%s' to logfile '%s': %m hash hit items_failed for '%s' '%s' already exists, but checking for any deps ERROR: failed to create directory '%s' --preserve=mode,xattr,timestamps Failed: cp --reflink=auto --sparse=auto --preserve=mode,xattr,timestamps -fL %s %s Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s you do not have execution permission ERROR: failed to install '%s' for '%s' could not get modinfo from '%s': %s
Possible missing firmware %s for kernel module %s dracut_install '%s' '%s' ERROR dracut_install '%s' is excluded dracut_install '%s' not hostonly kmod_module_get_dependency_symbols failed Module %s: symbol %s matched exclusion filter Module %s: symbol %s matched inclusion filter No symbol or path match for '%s' Adding module '%s' to hostonly module list Failed to lookup modules path '%s': %m Failed to get name for module '%s' 3 Failed to lookup alias '%s': %d Failed to lookup alias '%s': %m Environment DESTROOTDIR or argument -D is not set! Environment DESTROOTDIR or argument -D is set to '/'! Environment DESTROOTDIR or argument -D is set to '%s': %m Could not open %s for logging: %m ERROR: installing '%s' to '%s' 'qrrrqrrrqrprprpsprrrrrrrrrrrrrgprr[prOprqrrrCp7pr+porrorrorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrooyodoHon_entries >= 1 !h->iterate_list_head i hashmap_copy hashmap_move_one hashmap_move hashmap_merge hashmap_iterate_backwards hashmap_iterate hashmap_replace link_entry hash_scan hashmap_put unlink_entry remove_entry hashmap_ensure_allocated dracut-install: /dev/console install/log.c (level & 0x07) == level target >= 0 target < _LOG_TARGET_MAX DRACUT_LOG_TARGET DRACUT_LOG_LEVEL safe null Failed to open /dev/console for logging: %s Successfully opened /dev/console for logging. Assertion '%s' failed at %s:%u, function %s(). Aborting. Code should not be reached '%s' at %s:%u, function %s(). Aborting. Failed to parse log target %s. Ignoring. Failed to parse log level %s. Ignoring. log_target_from_string log_parse_environment log_set_target log_set_max_level log_open_console install/strv.c s || l == 0 i == c strv_parse_nulstr strv_remove_prefix strv_remove strv_split_newlines strv_split_quoted strv_split strv_find_prefix strv_find install/util.c postfix fd >= 0 close_nointr(fd) == 0 ret_u emerg state
alert crit err warning notice info (r = sysconf(_SC_PAGESIZE)) > 0 split_quoted cunescape_length_with_prefix log_level_from_string safe_atou close_nointr_nofail close_nointr endswith page_size ;` ,B |H N O 5O WO` P P Q` :Q Q
R
SP S
]| ^ \^ \b b f j k l m< n ,o L|x l l x ,0
l ̣ ܥ 0 h < L L
̩$
,P
ll
,
0 ,d H L` ܰx \ L0 lD X |@ < | , |L ̸p ܸ ̺ $ ,8 LT p ܻ , , ܽD X , \ ܾ | 4 ! h S d
v l R " o + H 4 a 8 m ? f D D P L W p g P y s S N A 9 E J = N T Y ] e l p @#
! ! o h
! ` x h o o o o o &
! p# # # # # # # # # $ $ $ 0$ @$ P$ `$ p$ $ $ $ $ $ $ $ $ % % % 0% @% P% `% p% % % % % % % % % & & & 0& @& P& `& p& & & & & & & & & ' ' ' 0' @' P' `' p' ' ' ' ' ' ' ' ' ( ( ( 0( @( P( `( p( ( ( ( ( ( ( ( ( ) ) ) 0) @) P) `) p) ) ) ) GA$3a1 @# > GA$3p1113 / GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*GOW * GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA$3a1 > % GA$3p1113 Є GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA* Є I GA*GOW * GA* GA*GOW *
GA*FORTIFY @? GA+GLIBCXX_ASSERTIONS
GA*FORTIFY Є GA+GLIBCXX_ASSERTIONS dracut-install-049-246.git20260728.el8_10.x86_64.debug * 7zXZ ִF ! t/%g _] ?Eh=ڊ2Nc } M89iCu]E7CX:e5,o=Dy֤
#s؈6ˠYĦ {$s)R
v8poׄxOK X>-[Tա#
y b<יkZˁF, <0 4x33P6ʬ 9M\ p}
!=^yN"#t_;aӹ{l/zsܵLٹ]ҷ́@ (]s0_ [ ]fCQrYm DTO%p6FԎ2>̱b?gz3f|B:=!P[ 0CFF>( DßbQ,4p(0/ĥ![bHFS~Hl aN'l-O1+@eb6/V>t"WGg+|dڨ#t !tgjL&^v5-L ټLؽ|Oƻqhd1Pfxph7 1E6ݲ,k1dӺZ`
ђGD!e3K,@ѐSNE˛v78.sjLi߲U7(uSx̭b#1YoIyKqBCM|0qT
@N|YlYS[*Њ6ȃ,t=FbYNgp_Yg!{i:x - V,m~SIۡ+ 'Xd8 vs]O05iiA e Wvd63IN ؚX>t.]O(|vUP ,bB *n[g~jmSH8O|z{>VI1{
_,
rkO<>ۢp5 Oz;nAp c~9 }liXd4"L96f}
qDeO$-(77IM zmDI#LTKgJn5/ ߺ~
d8,/"ڿ]dž6PLD5V*t==?jЯKȖ6%>`pqwBJmoG{ۿ+q. br`|~Kv|t
7dV ,..S5^[=w}Q p ҩV5 beVAgӟ3EnYwOg'ãjx ̅cE`< V49evl k(OXL5p FNڰ vߎ sR/Ugml=3;;"5뉩XNr <~א B NGH|;Y6C.qC_u[65MU
n'\],rm
lQĵ-['?C59 V
]S hu }/yV[ 1蛼EK2?Z-| <)TT/Ƅ ֶ]YO J $ȱg YZ .shstrtab .interp .note.gnu.property .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt.sec .text .fini .rodata .eh_frame_hdr .eh_frame .gcc_except_table .tbss .init_array .fini_array .data.rel.ro .dynamic .got .data .bss .gnu.build.attributes .gnu_debuglink .gnu_debugdata & 4 @ @ $ G o h h 4 Q P
Y
a o n o } x x h B ` @# @# `# `# P ) ) @ / / %
0 0 ! 4 4 d @ ! ! ! !
!
! ` ! !
" (a 8 < G 8 V modules.d/95fcoe/module-setup.sh 0000755 00000006534 15262675530 0012535 0 ustar 00 #!/bin/bash
# called by dracut
check() {
is_fcoe() {
block_is_fcoe $1 || return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_fcoe || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink fcoemon fcoeadm || return 1
return 0
}
# called by dracut
depends() {
echo network rootfs-block
return 0
}
# called by dracut
installkernel() {
instmods fcoe libfcoe 8021q edd bnx2fc
}
get_vlan_parent() {
local link=$1
[ -d $link ] || return
read iflink < $link/iflink
for if in /sys/class/net/* ; do
read idx < $if/ifindex
if [ $idx -eq $iflink ] ; then
echo ${if##*/}
fi
done
}
# called by dracut
cmdline() {
{
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
read enabled < $c/enabled
read mode < $c/mode
[ $enabled -eq 0 ] && continue
if [ $mode = "VN2VN" ] ; then
mode="vn2vn"
else
mode="fabric"
fi
d=$(cd -P $c; echo $PWD)
i=${d%/*}
ifname=${i##*/}
read mac < ${i}/address
s=$(dcbtool gc ${i##*/} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
if [ -z "$s" ] ; then
p=$(get_vlan_parent ${i})
if [ "$p" ] ; then
s=$(dcbtool gc ${p} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
ifname=${p##*/}
fi
fi
if [ "$s" = "on" ] ; then
dcb="dcb"
else
dcb="nodcb"
fi
# Some Combined Network Adapters(CNAs) implement DCB in firmware.
# Do not run software-based DCB or LLDP on CNAs that implement DCB.
# If the network interface provides hardware DCB/DCBX capabilities,
# DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to set to "no".
#
# Force "nodcb" if there's any DCB_REQUIRED="no"(child or vlan parent).
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${i##*/} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
if [ "$p" ] ; then
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${p} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
fi
echo "ifname=${ifname}:${mac}"
echo "fcoe=${ifname}:${dcb}:${mode}"
done
} | sort | uniq
}
# called by dracut
install() {
inst_multiple ip dcbtool fipvlan lldpad readlink lldptool fcoemon fcoeadm
if [ -e "/etc/hba.conf" ]; then
inst_libdir_file 'libhbalinux.so*'
inst_simple "/etc/hba.conf"
fi
mkdir -m 0755 -p "$initdir/var/lib/lldpad"
mkdir -m 0755 -p "$initdir/etc/fcoe"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _fcoeconf=$(cmdline)
[[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf"
fi
inst_multiple /etc/fcoe/cfg-*
inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up"
inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd"
inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh"
inst_hook pre-trigger 03 "$moddir/lldpad.sh"
inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
inst_hook cleanup 90 "$moddir/cleanup-fcoe.sh"
inst_hook shutdown 40 "$moddir/stop-fcoe.sh"
dracut_need_initqueue
}
modules.d/95fcoe/fcoe-edd.sh 0000755 00000002212 15262675530 0011545 0 ustar 00 #!/bin/sh
dcb="$1"
_modprobe_r_edd="0"
check_edd() {
local cnt=0
[ -d /sys/firmware/edd ] && return 0
_modprobe_r_edd="1"
modprobe edd || return $?
while [ $cnt -lt 600 ]; do
[ -d /sys/firmware/edd ] && return 0
cnt=$(($cnt+1))
sleep 0.1
done
return 1
}
check_edd || exit 1
for disk in /sys/firmware/edd/int13_*; do
[ -d "$disk" ] || continue
if [ -e "${disk}/pci_dev/driver" ]; then
driver=$(readlink "${disk}/pci_dev/driver")
driver=${driver##*/}
fi
# i40e uses dev_port 1 for a virtual fcoe function
if [ "${driver}" = "i40e" ]; then
dev_port=1
fi
for nic in "${disk}"/pci_dev/net/*; do
[ -d "$nic" ] || continue
if [ -n "${dev_port}" -a -e "${nic}/dev_port" ]; then
if [ "$(cat ${nic}/dev_port)" -ne "${dev_port}" ]; then
continue
fi
fi
if [ -e ${nic}/address ]; then
fcoe_interface=${nic##*/}
if ! [ -e "/tmp/.fcoe-$fcoe_interface" ]; then
/sbin/fcoe-up "$fcoe_interface" "$dcb"
> "/tmp/.fcoe-$fcoe_interface"
fi
fi
done
done
[ "$_modprobe_r_edd" = "1" ] && modprobe -r edd
unset _modprobe_r_edd
modules.d/95fcoe/fcoe-up.sh 0000755 00000004743 15262675530 0011450 0 ustar 00 #!/bin/sh
#
# We get called like this:
# fcoe-up
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? Missing arguments ??
[ -z "$1" -o -z "$2" ] && exit 1
netif=$1
dcb=$2
mode=$3
vlan="yes"
iflink=$(cat /sys/class/net/$netif/iflink)
ifindex=$(cat /sys/class/net/$netif/ifindex)
if [ "$iflink" != "$ifindex" ] ; then
# Skip VLAN devices
exit 0
fi
ip link set dev $netif up
linkup "$netif"
# Some fcoemon implementations expect --syslog=true
syslogopt="--syslog"
if fcoemon -h|grep syslog|grep -q yes; then
fcoemonyes="$syslogopt=yes"
fi
netdriver=$(readlink -f /sys/class/net/$netif/device/driver)
netdriver=${netdriver##*/}
write_fcoemon_cfg() {
[ -f /etc/fcoe/cfg-$netif ] && return
echo FCOE_ENABLE=\"yes\" > /etc/fcoe/cfg-$netif
if [ "$dcb" = "dcb" ]; then
echo DCB_REQUIRED=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo DCB_REQUIRED=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$vlan" = "yes" ]; then
echo AUTO_VLAN=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo AUTO_VLAN=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$mode" = "vn2vn" ] ; then
echo MODE=\"vn2vn\" >> /etc/fcoe/cfg-$netif
else
echo MODE=\"fabric\" >> /etc/fcoe/cfg-$netif
fi
}
if [ "$netdriver" = "bnx2x" ]; then
# If driver is bnx2x, do not use /sys/module/fcoe/parameters/create but fipvlan
modprobe 8021q
udevadm settle --timeout=30
# Sleep for 13 s to allow dcb negotiation
sleep 13
fipvlan "$netif" -c -s
need_shutdown
exit
fi
if [ "$dcb" = "dcb" ]; then
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" dcb on && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" pfc e:1 a:1 w:1 && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" app:fcoe e:1 a:1 w:1 && break
info "Retrying to turn fcoe on"
sleep 1
i=$(($i+1))
done
sleep 1
fi
write_fcoemon_cfg
fcoemon $syslogopt
need_shutdown
modules.d/95fcoe/lldpad.sh 0000755 00000000730 15262675530 0011342 0 ustar 00 #!/bin/bash
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping lldpad activation"
return 0
fi
# Note lldpad will stay running after switchroot, the system initscripts
# are to kill it and start a new lldpad to take over. Data is transfered
# between the 2 using a shm segment
lldpad -d
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
modules.d/95fcoe/fcoe-genrules.sh 0000755 00000002264 15262675530 0012644 0 ustar 00 #!/bin/sh
# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
# If neither mac nor interface are set we don't continue
[ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return
# Write udev rules
{
if [ -n "$fcoe_mac" ] ; then
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
else
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
fi
} >> /etc/udev/rules.d/92-fcoe.rules
modules.d/95fcoe/stop-fcoe.sh 0000755 00000000157 15262675530 0012004 0 ustar 00 #!/bin/bash
for f in /sys/bus/fcoe/devices/ctlr_* ; do
[ -e $f ] || continue
echo 0 > $f/enabled
done
modules.d/95fcoe/cleanup-fcoe.sh 0000755 00000001040 15262675530 0012436 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /var/run/lldpad.pid ]; then
lldpad -k
# with systemd version 230, this is not necessary anymore
# systemd commit cacf980ed44a28e276a6cc7f8fc41f991e2ab354
if [ -z "$DRACUT_SYSTEMD" ]; then
mkdir -m 0755 -p /run/initramfs/state/dev/shm
cp /dev/shm/lldpad.state /run/initramfs/state/dev/shm/ > /dev/null 2>&1
echo "files /dev/shm/lldpad.state" >> /run/initramfs/rwtab
fi
fi
modules.d/95fcoe/parse-fcoe.sh 0000755 00000003766 15262675530 0012142 0 ustar 00 #!/bin/sh
#
# Supported formats:
# fcoe=::
# fcoe=::
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# fcoe=eth0:nodcb:vn2vn
# fcoe=4a:3f:4c:04:f8:d7:nodcb:fabric
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping fcoe"
return 0
fi
[ -z "$fcoe" ] && fcoe=$(getarg fcoe=)
# If it's not set we don't continue
[ -z "$fcoe" ] && return
[ -e /sys/bus/fcoe/ctlr_create ] || modprobe -b -a fcoe || modprobe -b -a libfcoe || die "FCoE requested but kernel/initrd does not support FCoE"
initqueue --onetime modprobe -b -q bnx2fc
parse_fcoe_opts() {
local OLDIFS="$IFS"
local IFS=:
set $fcoe
IFS="$OLDIFS"
case $# in
2)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode="fabric"
return 0
;;
3)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode=$3
return 0
;;
7)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode="fabric"
return 0
;;
8)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode=$8
return 0
;;
*)
warn "Invalid arguments for fcoe=$fcoe"
return 1
;;
esac
}
parse_fcoe_opts
if [ "$fcoe_interface" = "edd" ]; then
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
/sbin/initqueue --settled --unique /sbin/fcoe-edd $fcoe_dcb
else
for fcoe in $(getargs fcoe=); do
unset fcoe_mac
unset fcoe_interface
parse_fcoe_opts
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
. $(command -v fcoe-genrules.sh)
done
fi
modules.d/95iscsi/module-setup.sh 0000755 00000022216 15262675530 0012726 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _rootdev
# If our prerequisites are not met, fail anyways.
require_binaries iscsi-iname iscsiadm iscsid || return 1
# If hostonly was requested, fail the check if we are not actually
# booting from root.
is_iscsi() {
local _dev=$1
[[ -L "/sys/dev/block/$_dev" ]] || return
cd "$(readlink -f "/sys/dev/block/$_dev")"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]]
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
pushd . >/dev/null
for_each_host_dev_and_slaves is_iscsi || return 255
popd >/dev/null
}
return 0
}
get_ibft_mod() {
local ibft_mac=$1
local iface_mac iface_mod
# Return the iSCSI offload module for a given MAC address
for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do
iface_mod=${iface_desc%%,*}
iface_mac=${iface_desc#*,}
iface_mac=${iface_mac%%,*}
if [ "$ibft_mac" = "$iface_mac" ] ; then
echo $iface_mod
return 0
fi
done
}
install_ibft() {
# When iBFT / iscsi_boot is detected:
# - Use 'ip=ibft' to set up iBFT network interface
# Note: bnx2i is using a different MAC address of iSCSI offloading
# so the 'ip=ibft' parameter must not be set
# - specify firmware booting cmdline parameter
for d in /sys/firmware/* ; do
if [ -d ${d}/ethernet0 ] ; then
read ibft_mac < ${d}/ethernet0/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then
read ibft_mac < ${d}/ethernet1/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -d ${d}/initiator ] ; then
if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then
echo -n "rd.iscsi.ibft=1 "
fi
echo -n "rd.iscsi.firmware=1"
fi
done
}
install_iscsiroot() {
local devpath=$1
local scsi_path iscsi_lun session c d conn host flash
local iscsi_session iscsi_address iscsi_port iscsi_targetname iscsi_tpgt
local bootproto
scsi_path=${devpath%%/block*}
[ "$scsi_path" = "$devpath" ] && return 1
iscsi_lun=${scsi_path##*:}
[ "$iscsi_lun" = "$scsi_path" ] && return 1
session=${devpath%%/target*}
[ "$session" = "$devpath" ] && return 1
iscsi_session=${session##*/}
[ "$iscsi_session" = "$session" ] && return 1
host=${session%%/session*}
[ "$host" = "$session" ] && return 1
iscsi_host=${host##*/}
for flash in ${host}/flashnode_sess-* ; do
[ -f "$flash" ] || continue
[ ! -e "$flash/is_boot_target" ] && continue
is_boot=$(cat $flash/is_boot_target)
if [ $is_boot -eq 1 ] ; then
# qla4xxx flashnode session; skip iBFT discovery
iscsi_initiator=$(cat /sys/class/iscsi_host/${iscsi_host}/initiatorname)
echo "rd.iscsi.initiator=${iscsi_initiator}"
return;
fi
done
for d in ${session}/* ; do
case $d in
*connection*)
c=${d##*/}
conn=${d}/iscsi_connection/${c}
if [ -d ${conn} ] ; then
iscsi_address=$(cat ${conn}/persistent_address)
iscsi_port=$(cat ${conn}/persistent_port)
fi
;;
*session)
if [ -d ${d}/${iscsi_session} ] ; then
iscsi_initiator=$(cat ${d}/${iscsi_session}/initiatorname)
iscsi_targetname=$(cat ${d}/${iscsi_session}/targetname)
fi
;;
esac
done
[ -z "$iscsi_address" ] && return
local_address=$(ip -o route get to $iscsi_address | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p')
ifname=$(ip -o route get to $iscsi_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
# follow ifcfg settings for boot protocol
for _path in \
"/etc/sysconfig/network-scripts/ifcfg-$ifname" \
"/etc/sysconfig/network/ifcfg-$ifname" \
; do
[ -r "$_path" ] && bootproto=$(sed -n "s/BOOTPROTO='\?\([[:alpha:]]*6\?\)4\?/\1/p" "$_path")
done
if [ $bootproto ]; then
printf 'ip=%s:%s ' ${ifname} ${bootproto}
else
printf 'ip=%s:static ' ${ifname}
fi
if [ -e /sys/class/net/$ifname/address ] ; then
ifmac=$(cat /sys/class/net/$ifname/address)
printf 'ifname=%s:%s ' ${ifname} ${ifmac}
fi
if [ -n "$iscsi_address" -a -n "$iscsi_targetname" ] ; then
if [ -n "$iscsi_port" -a "$iscsi_port" -eq 3260 ] ; then
iscsi_port=
fi
if [ -n "$iscsi_lun" -a "$iscsi_lun" -eq 0 ] ; then
iscsi_lun=
fi
# In IPv6 case rd.iscsi.initatior= must pass address in [] brackets
case "$iscsi_address" in
*:*)
iscsi_address="[$iscsi_address]"
;;
esac
# Must be two separate lines, so that "sort | uniq" commands later
# can sort out rd.iscsi.initiator= duplicates
echo "rd.iscsi.initiator=${iscsi_initiator}"
echo "netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}"
echo "rd.neednet=1"
fi
return 0
}
install_softiscsi() {
[ -d /sys/firmware/ibft ] && return 0
is_softiscsi() {
local _dev=$1
local iscsi_dev
[[ -L "/sys/dev/block/$_dev" ]] || return
iscsi_dev=$(cd -P /sys/dev/block/$_dev; echo $PWD)
install_iscsiroot $iscsi_dev
}
for_each_host_dev_and_slaves_all is_softiscsi || return 255
return 0
}
# called by dracut
depends() {
echo network rootfs-block
}
# called by dracut
installkernel() {
local _arch=$(uname -m)
local _funcs='iscsi_register_transport'
instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi qedi
hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
_s390drivers="=drivers/s390/scsi"
fi
dracut_instmods -o -s ${_funcs} =drivers/scsi ${_s390drivers:+"$_s390drivers"}
}
# called by dracut
cmdline() {
local _iscsiconf=$(install_ibft)
{
if [ "$_iscsiconf" ] ; then
echo ${_iscsiconf}
else
install_softiscsi
fi
} | sort | uniq
}
# called by dracut
install() {
inst_multiple -o iscsiuio
inst_libdir_file 'libgcc_s.so*'
inst_multiple umount iscsi-iname iscsiadm iscsid
inst_multiple -o \
$systemdsystemunitdir/iscsid.socket \
$systemdsystemunitdir/iscsid.service \
$systemdsystemunitdir/iscsiuio.service \
$systemdsystemunitdir/iscsiuio.socket \
$systemdsystemunitdir/sockets.target.wants/iscsid.socket \
$systemdsystemunitdir/sockets.target.wants/iscsiuio.socket
if [[ $hostonly ]]; then
inst_dir $(/usr/bin/find /etc/iscsi)
else
inst_simple /etc/iscsi/iscsid.conf
fi
# Detect iBFT and perform mandatory steps
if [[ $hostonly_cmdline == "yes" ]] ; then
local _iscsiconf=$(cmdline)
[[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf"
fi
inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh"
inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
if ! dracut_module_included "systemd"; then
inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
else
inst_multiple -o \
$systemdsystemunitdir/iscsi.service \
$systemdsystemunitdir/iscsid.service \
$systemdsystemunitdir/iscsid.socket \
$systemdsystemunitdir/iscsiuio.service \
$systemdsystemunitdir/iscsiuio.socket \
iscsiadm iscsid
for i in \
iscsid.socket \
iscsiuio.socket \
; do
systemctl -q --root "$initdir" enable "$i"
done
for i in \
iscsid.service \
iscsiuio.service \
; do
systemctl -q --root "$initdir" add-wants basic.target "$i"
done
# Make sure iscsid is started after dracut-cmdline and ready for the initqueue
mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d"
(
echo "[Unit]"
echo "After=dracut-cmdline.service"
echo "Before=dracut-initqueue.service"
) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf"
# The iscsi deamon does not need to wait for any storage inside initrd
mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.socket.d"
(
echo "[Unit]"
echo "DefaultDependencies=no"
echo "Conflicts=shutdown.target"
echo "Before=shutdown.target sockets.target"
) > "${initdir}/$systemdsystemunitdir/iscsid.socket.d/dracut.conf"
mkdir -p "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d"
(
echo "[Unit]"
echo "DefaultDependencies=no"
echo "Conflicts=shutdown.target"
echo "Before=shutdown.target sockets.target"
) > "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d/dracut.conf"
fi
inst_dir /var/lib/iscsi
dracut_need_initqueue
}
modules.d/95iscsi/iscsiroot.sh 0000755 00000024722 15262675530 0012325 0 ustar 00 #!/bin/sh
#
# This implementation is incomplete: Discovery mode is not implemented and
# the argument handling doesn't follow currently agreed formats. This is mainly
# because rfc4173 does not say anything about iscsi_initiator but open-iscsi's
# iscsistart needs this.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3? This isn't really necessary, since NEWROOT isn't
# used here. But let's be consistent
[ -z "$3" ] && exit 1
# root is in the form root=iscsi:[]:[]:[]:[]:
netif="$1"
iroot="$2"
# If it's not iscsi we don't continue
[ "${iroot%%:*}" = "iscsi" ] || exit 1
iroot=${iroot#iscsi}
iroot=${iroot#:}
# XXX modprobe crc32c should go in the cmdline parser, but I haven't yet
# figured out a way how to check whether this is built-in or not
modprobe crc32c 2>/dev/null
if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
iscsiuio
> /tmp/iscsiuio-started
fi
handle_firmware()
{
local ifaces retry
# Depending on the 'ql4xdisablesysfsboot' qla4xxx
# will be autostarting sessions without presenting
# them via the firmware interface.
# In these cases 'iscsiadm -m fw' will fail, but
# the iSCSI sessions will still be present.
if ! iscsiadm -m fw; then
warn "iscsiadm: Could not get list of targets from firmware."
else
ifaces=$(set -- /sys/firmware/ibft/ethernet*; echo $#)
retry=$(cat /tmp/session-retry)
if [ $retry -lt $ifaces ]; then
retry=$((retry+1))
echo $retry > /tmp/session-retry
return 1
else
rm /tmp/session-retry
fi
if ! iscsiadm -m fw -l; then
warn "iscsiadm: Log-in to iscsi target failed"
else
need_shutdown
fi
fi
[ -d /sys/class/iscsi_session ] || return 1
echo 'started' > "/tmp/iscsistarted-iscsi:"
echo 'started' > "/tmp/iscsistarted-firmware"
return 0
}
handle_netroot()
{
local iscsi_initiator iscsi_target_name iscsi_target_ip iscsi_target_port
local iscsi_target_group iscsi_protocol iscsirw iscsi_lun
local iscsi_username iscsi_password
local iscsi_in_username iscsi_in_password
local iscsi_iface_name iscsi_netdev_name
local iscsi_param param
local p found
local login_retry_max_seen=
# override conf settings by command line options
arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
[ -n "$arg" ] && iscsi_initiator=$arg
arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=)
[ -n "$arg" ] && iscsi_target_group=$arg
arg=$(getarg rd.iscsi.username -d iscsi_username=)
[ -n "$arg" ] && iscsi_username=$arg
arg=$(getarg rd.iscsi.password -d iscsi_password)
[ -n "$arg" ] && iscsi_password=$arg
arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=)
[ -n "$arg" ] && iscsi_in_username=$arg
arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=)
[ -n "$arg" ] && iscsi_in_password=$arg
for p in $(getargs rd.iscsi.param -d iscsi_param); do
[ "${p%=*}" = node.session.initial_login_retry_max ] && \
login_retry_max_seen=yes
iscsi_param="$iscsi_param $p"
done
# this sets iscsi_target_name and possibly overwrites most
# parameters read from the command line above
parse_iscsi_root "$1" || return 1
# Bail out early, if there is no route to the destination
if is_ip "$iscsi_target_ip" && [ "$netif" != "timeout" ] && ! all_ifaces_setup && getargbool 1 rd.iscsi.testroute; then
ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0
fi
#limit iscsistart login retries
if [ "$login_retry_max_seen" != yes ]; then
retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max)
if [ $retries -gt 0 ]; then
iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries"
fi
fi
# XXX is this needed?
getarg ro && iscsirw=ro
getarg rw && iscsirw=rw
fsopts=${fsopts:+$fsopts,}${iscsirw}
if [ -z "$iscsi_initiator" ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read -r line || [ -n "$line" ]; do echo "$line"; done < /sys/firmware/ibft/initiator/initiator-name)
printf 'InitiatorName=%q\n' "$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
: > /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$iscsi_initiator" ]; then
[ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi
[ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
[ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
iscsi_initiator=$InitiatorName
fi
if [ -z "$iscsi_initiator" ]; then
iscsi_initiator=$(iscsi-iname)
printf 'InitiatorName=%q\n' "$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$iscsi_target_port" ]; then
iscsi_target_port=3260
fi
if [ -z "$iscsi_target_group" ]; then
iscsi_target_group=1
fi
if [ -z "$iscsi_lun" ]; then
iscsi_lun=0
fi
printf 'InitiatorName=%q\n' "$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
iscsid
sleep 2
fi
# FIXME $iscsi_protocol??
if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then
# if root is not specified try to mount the whole iSCSI LUN
printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$(printf '%s' "$iscsi_lun" | tr -d '"')" >> /etc/udev/rules.d/99-iscsi-root.rules
udevadm control --reload
write_fs_tab /dev/root
wait_for_dev -n /dev/root
# install mount script
[ -z "$DRACUT_SYSTEMD" ] \
&& printf 'iscsi_lun=%q . /bin/mount-lun.sh\n' "$iscsi_lun" > "$hookdir"/mount/01-$$-iscsi.sh
fi
targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/')
[ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && return 1
found=
for target in $targets; do
if [ "$target" = "$iscsi_target_name" ]; then
if [ -n "$iscsi_iface_name" ]; then
iscsiadm -m iface -I $iscsi_iface_name --op=new
EXTRA=" ${iscsi_netdev_name:+--name=iface.net_ifacename --value=$iscsi_netdev_name} "
EXTRA="$EXTRA ${iscsi_initiator:+--name=iface.initiatorname --value=$iscsi_initiator} "
fi
[ -n "$iscsi_param" ] && for param in $iscsi_param; do EXTRA="$EXTRA --name=${param%=*} --value=${param#*=}"; done
CMD="iscsiadm -m node -T $target \
${iscsi_iface_name:+-I $iscsi_iface_name} \
-p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port}"
__op="--op=update \
--name=node.startup --value=onboot \
${iscsi_username:+ --name=node.session.auth.username --value=$iscsi_username} \
${iscsi_password:+ --name=node.session.auth.password --value=$iscsi_password} \
${iscsi_in_username:+--name=node.session.auth.username_in --value=$iscsi_in_username} \
${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \
$EXTRA \
$NULL"
$CMD $__op
if [ "$netif" != "timeout" ]; then
$CMD --login
fi
found=yes
break
fi
done
if [ "$netif" = "timeout" ]; then
iscsiadm -m node -L onboot || :
elif [ "$found" != yes ]; then
warn "iSCSI target \"$iscsi_target_name\" not found on portal $iscsi_target_ip:$iscsi_target_port"
return 1
fi
> $hookdir/initqueue/work
netroot_enc=$(str_replace "$1" '/' '\2f')
echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
return 0
}
ret=0
if [ "$netif" != "timeout" ] && getargbool 0 rd.iscsi.waitnet; then
all_ifaces_setup || exit 0
fi
if [ "$netif" = "timeout" ] && all_ifaces_setup; then
# s.th. went wrong and the timeout script hits
# restart
systemctl restart iscsid
# damn iscsid is not ready after unit says it's ready
sleep 2
fi
if getargbool 0 rd.iscsi.firmware -d -y iscsi_firmware ; then
if [ "$netif" = "timeout" ] || [ "$netif" = "online" ] || [ "$netif" = "dummy" ]; then
[ -f /tmp/session-retry ] || echo 1 > /tmp/session-retry
handle_firmware
ret=$?
fi
fi
if ! [ "$netif" = "online" ]; then
# loop over all netroot parameter
if nroot=$(getarg netroot) && [ "$nroot" != "dhcp" ]; then
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
nroot="${nroot##iscsi:}"
if [ -n "$nroot" ]; then
handle_netroot "$nroot"
ret=$(($ret + $?))
fi
done
else
if [ -n "$iroot" ]; then
handle_netroot "$iroot"
ret=$?
fi
fi
fi
need_shutdown
# now we have a root filesystem somewhere in /dev/sd*
# let the normal block handler handle root=
exit $ret
modules.d/95iscsi/mount-lun.sh 0000755 00000000514 15262675530 0012236 0 ustar 00 #!/bin/sh
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
NEWROOT=${NEWROOT:-"/sysroot"}
for disk in /dev/disk/by-path/*-iscsi-*-$iscsi_lun; do
if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then
if [ ! -d $NEWROOT/proc ]; then
umount $disk
continue
fi
break
fi
done
modules.d/95iscsi/cleanup-iscsi.sh 0000755 00000000130 15262675530 0013031 0 ustar 00 #!/bin/sh
[ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio
modules.d/95iscsi/parse-iscsiroot.sh 0000755 00000013740 15262675530 0013433 0 ustar 00 #!/bin/sh
#
# Preferred format:
# root=iscsi:[]:[]:[]:[]:
# [root=*] netroot=iscsi:[]:[]:[]:[]:
#
# Legacy formats:
# [net]root=[iscsi] iscsiroot=[]:[]:[]:[]:
# [net]root=[iscsi] iscsi_firmware
#
# root= takes precedence over netroot= if root=iscsi[...]
#
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "iscsi" ] && break
done
if [ "${nroot%%:*}" = "iscsi" ]; then
netroot="$nroot"
else
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "dhcp" ] && break
done
netroot="$nroot"
fi
fi
[ -z "$iscsiroot" ] && iscsiroot=$(getarg iscsiroot=)
[ -z "$iscsi_firmware" ] && getargbool 0 rd.iscsi.firmware -y iscsi_firmware && iscsi_firmware="1"
[ -n "$iscsiroot" ] && [ -n "$iscsi_firmware" ] && die "Mixing iscsiroot and iscsi_firmware is dangerous"
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
# Root takes precedence over netroot
if [ "${root%%:*}" = "iscsi" ] ; then
if [ -n "$netroot" ] ; then
echo "Warning: root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
# if root is not specified try to mount the whole iSCSI LUN
printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
[ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules
root=/dev/root
write_fs_tab /dev/root
fi
# If it's not empty or iscsi we don't continue
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
netroot="$nroot"
break
done
# Root takes precedence over netroot
if [ "${root}" = "/dev/root" ] && getarg "netroot=dhcp" ; then
# if root is not specified try to mount the whole iSCSI LUN
printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
[ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules
fi
if [ -n "$iscsiroot" ] ; then
[ -z "$netroot" ] && netroot=$root
# @deprecated
echo "Warning: Argument iscsiroot is deprecated and might be removed in a future"
echo "release. See 'man dracut.kernel' for more information."
# Accept iscsiroot argument?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \
die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi"
# Override root with iscsiroot content?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot
fi
# iscsi_firmware does not need argument checking
if [ -n "$iscsi_firmware" ]; then
if [ "$root" != "dhcp" ] && [ "$netroot" != "dhcp" ]; then
[ -z "$netroot" ] && netroot=iscsi:
fi
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
# if no ip= is given, but firmware
echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT"
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT"
initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "$NEWROOT"
fi
# ISCSI actually supported?
if ! [ -e /sys/module/iscsi_tcp ]; then
modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
fi
modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi
if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then
if ! getargbool 1 rd.neednet > /dev/null || ! getarg "ip="; then
initqueue --unique --onetime --settled /sbin/iscsiroot dummy "$netroot" "$NEWROOT"
fi
fi
if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ] && ! [ -f /run/initiatorname.iscsi ] ; then
iscsi_initiator=$arg
printf 'InitiatorName=%q\n' "$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
# If not given on the cmdline and initiator-name available via iBFT
if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
if [ -n "$iscsi_initiator" ]; then
printf 'InitiatorName=%q\n' "$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
fi
if [ -z "$netroot" ] || ! [ "${netroot%%:*}" = "iscsi" ]; then
return 1
fi
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "$netroot" "$NEWROOT"
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
parse_iscsi_root "$nroot" || return 1
netroot_enc=$(str_replace "$nroot" '/' '\2f')
echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
done
# Done, all good!
rootok=1
# Shut up init error check
[ -z "$root" ] && root="iscsi"
modules.d/95udev-rules/module-setup.sh 0000755 00000006405 15262675530 0013711 0 ustar 00 #!/bin/bash
# called by dracut
install() {
local _i
# Fixme: would be nice if we didn't have to guess, which rules to grab....
# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
# of the rules we want so that we just copy those in would be best
inst_multiple udevadm cat uname blkid
inst_dir /etc/udev
inst_multiple -o /etc/udev/udev.conf
[ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
[ -x "$_i" ] || continue
inst "$_i"
if ! [[ -f ${initdir}${systemdutildir}/systemd-udevd ]]; then
ln -fs "$_i" ${initdir}${systemdutildir}/systemd-udevd
fi
break
done
if ! [[ -e ${initdir}${systemdutildir}/systemd-udevd ]]; then
derror "Cannot find [systemd-]udevd binary!"
exit 1
fi
inst_rules \
40-redhat.rules \
50-firmware.rules \
50-udev.rules \
50-udev-default.rules \
55-scsi-sg3_id.rules \
58-scsi-sg3_symlink.rules \
59-scsi-sg3_utils.rules \
60-block.rules \
60-pcmcia.rules \
60-persistent-storage.rules \
61-persistent-storage-edd.rules \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
75-net-description.rules \
80-drivers.rules 95-udev-late.rules \
80-net-name-slot.rules\
80-net-setup-link.rules \
95-late.rules \
"$moddir/59-persistent-storage.rules" \
"$moddir/61-persistent-storage.rules" \
${NULL}
prepare_udev_rules 59-persistent-storage.rules 61-persistent-storage.rules
# debian udev rules
inst_rules 91-permissions.rules
# eudev rules
inst_rules 80-drivers-modprobe.rules
if dracut_module_included "systemd"; then
inst_multiple -o ${systemdutildir}/network/*.link
[[ $hostonly ]] && inst_multiple -H -o /etc/systemd/network/*.link
fi
{
for i in cdrom tape dialout floppy; do
if ! grep -q "^$i:" "$initdir/etc/group" 2>/dev/null; then
if ! grep "^$i:" /etc/group 2>/dev/null; then
case $i in
cdrom) echo "$i:x:11:";;
dialout) echo "$i:x:18:";;
floppy) echo "$i:x:19:";;
tape) echo "$i:x:33:";;
esac
fi
fi
done
} >> "$initdir/etc/group"
inst_multiple -o \
${udevdir}/ata_id \
${udevdir}/cdrom_id \
${udevdir}/create_floppy_devices \
${udevdir}/edd_id \
${udevdir}/firmware.sh \
${udevdir}/firmware \
${udevdir}/firmware.agent \
${udevdir}/hotplug.functions \
${udevdir}/fw_unit_symlinks.sh \
${udevdir}/hid2hci \
${udevdir}/path_id \
${udevdir}/input_id \
${udevdir}/scsi_id \
${udevdir}/usb_id \
${udevdir}/pcmcia-socket-startup \
${udevdir}/pcmcia-check-broken-cis
inst_multiple -o /etc/pcmcia/config.opts
[ -f /etc/arch-release ] && \
inst_script "$moddir/load-modules.sh" /lib/udev/load-modules.sh
inst_libdir_file "libnss_files*"
}
modules.d/95udev-rules/59-persistent-storage.rules 0000644 00000000423 15262675530 0016072 0 ustar 00 SUBSYSTEM!="block", GOTO="ps_end"
ACTION!="add|change", GOTO="ps_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="ps_end"
KERNEL=="cciss[0-9]*", IMPORT BLKID
KERNEL=="nbd[0-9]*", IMPORT BLKID
LABEL="ps_end"
modules.d/95udev-rules/61-persistent-storage.rules 0000644 00000001773 15262675530 0016074 0 ustar 00 SUBSYSTEM!="block", GOTO="pss_end"
ACTION!="add|change", GOTO="pss_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="pss_end"
ACTION=="change", KERNEL=="dm-[0-9]*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}!="1", GOTO="do_pss"
KERNEL=="cciss[0-9]*", GOTO="do_pss"
KERNEL=="nbd[0-9]*", GOTO="do_pss"
KERNEL=="md[0-9]*|md_d[0-9]*|md/*", GOTO="do_pss"
GOTO="pss_end"
LABEL="do_pss"
# by-path (parent device path)
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="", DEVPATH!="*/virtual/*", IMPORT PATH_ID
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
# by-label/by-uuid links (filesystem metadata)
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
LABEL="pss_end"
modules.d/95udev-rules/load-modules.sh 0000755 00000000116 15262675530 0013644 0 ustar 00 #!/bin/sh
# Implement blacklisting for udev-loaded modules
modprobe -b "$@"
modules.d/05nss-softokn/module-setup.sh 0000755 00000000443 15262675530 0014065 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
local _dir
inst_libdir_file libfreeblpriv3.so libfreeblpriv3.chk \
libfreebl3.so
}
modules.d/98syslog/module-setup.sh 0000755 00000002221 15262675530 0013131 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
local _i
local _installs
if find_binary rsyslogd >/dev/null; then
_installs="rsyslogd"
inst_libdir_file rsyslog/lmnet.so rsyslog/imklog.so rsyslog/imuxsock.so rsyslog/imjournal.so
elif find_binary syslogd >/dev/null; then
_installs="syslogd"
elif find_binary syslog-ng >/dev/null; then
_installs="syslog-ng"
else
derror "Could not find any syslog binary although the syslogmodule" \
"is selected to be installed. Please check."
fi
if [ -n "$_installs" ]; then
inst_multiple cat $_installs
inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
inst_hook cleanup 99 "$moddir/syslog-cleanup.sh"
inst_hook initqueue/online 70 "$moddir/rsyslogd-start.sh"
inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
mkdir -m 0755 -p ${initdir}/etc/templates
inst_simple "${moddir}/rsyslog.conf" /etc/templates/rsyslog.conf
fi
dracut_need_initqueue
}
modules.d/98syslog/rsyslogd-start.sh 0000755 00000002321 15262675530 0013510 0 ustar 00 #!/bin/sh
# Triggered by initqueue/online and starts rsyslogd with bootparameters
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# prevent starting again if already running
if [ -f /var/run/syslogd.pid ]; then
read pid < /var/run/syslogd.pid
kill -0 $pid && exit 0
fi
rsyslog_config() {
local server=$1
shift
local syslog_template=$1
shift
local filters=$*
local filter=
cat $syslog_template
(
# disable shell expansion / globbing
# since filters contain such characters
set -f
for filter in $filters; do
echo "${filter} @${server}"
done
)
#echo "*.* /tmp/syslog"
}
[ -f /tmp/syslog.type ] && read type < /tmp/syslog.type
[ -f /tmp/syslog.server ] && read server < /tmp/syslog.server
[ -f /tmp/syslog.filters ] && read filters < /tmp/syslog.filters
[ -z "$filters" ] && filters="kern.*"
[ -f /tmp/syslog.conf ] && read conf < /tmp/syslog.conf
[ -z "$conf" ] && conf="/etc/rsyslog.conf" && echo "$conf" > /tmp/syslog.conf
if [ $type == "rsyslogd" ]; then
template=/etc/templates/rsyslog.conf
if [ -n "$server" ]; then
rsyslog_config "$server" "$template" "$filters" > $conf
rsyslogd -c3
fi
fi
modules.d/98syslog/syslog-cleanup.sh 0000755 00000000627 15262675530 0013463 0 ustar 00 #!/bin/sh
# Just cleans up a previously started syslogd
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
if [ -f /tmp/syslog.server ]; then
read syslogtype < /tmp/syslog.type
if command -v "${syslogtype}-stop" >/dev/null; then
${syslogtype}-stop
else
warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
fi
fi modules.d/98syslog/parse-syslog-opts.sh 0000755 00000002202 15262675530 0014120 0 ustar 00 #!/bin/sh
# Parses the syslog commandline options
#
#Bootparameters:
#syslogserver=ip Where to syslog to
#sysloglevel=level What level has to be logged
#syslogtype=rsyslog|syslog|syslogng
# Don't auto detect syslog but set it
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
detect_syslog() {
syslogtype=""
if [ -e /sbin/rsyslogd ]; then
syslogtype="rsyslogd"
elif [ -e /sbin/syslogd ]; then
syslogtype="syslogd"
elif [ -e /sbin/syslog-ng ]; then
syslogtype="syslog-ng"
else
warn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
fi
echo "$syslogtype"
[ -n "$syslogtype" ]
}
syslogserver=$(getarg syslog.server -d syslog)
syslogfilters=$(getargs syslog.filter -d filter)
syslogtype=$(getarg syslog.type -d syslogtype)
[ -n "$syslogserver" ] && echo $syslogserver > /tmp/syslog.server
[ -n "$syslogfilters" ] && echo "$syslogfilters" > /tmp/syslog.filters
if [ -n "$syslogtype" ]; then
echo "$syslogtype" > /tmp/syslog.type
else
syslogtype=$(detect_syslog)
echo $syslogtype > /tmp/syslog.type
fi
modules.d/98syslog/rsyslog.conf 0000644 00000001464 15262675530 0012530 0 ustar 00 #rsyslog v3 config file
# if you experience problems, check
# http://www.rsyslog.com/troubleshoot for assistance
#### MODULES ####
$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command)
$ModLoad imklog.so # provides kernel logging support (previously done by rklogd)
#$ModLoad immark.so # provides --MARK-- message capability
# Provides UDP syslog reception
#$ModLoad imudp.so
#$UDPServerRun 514
# Provides TCP syslog reception
#$ModLoad imtcp.so
#$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
#### RULES ####
modules.d/98syslog/rsyslogd-stop.sh 0000755 00000000436 15262675530 0013345 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# Kills rsyslogd
if [ -f /var/run/syslogd.pid ]; then
read pid < /var/run/syslogd.pid
kill $pid
kill -0 $pid && kill -9 $pid
else
warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it."
fi
modules.d/98syslog/README 0000644 00000001501 15262675530 0011027 0 ustar 00 Syslog support for dracut
This module provides syslog functionality in the initrd.
This is especially interesting when complex configuration being
used to provide access to the device the rootfs resides on.
When this module is installed into the ramfs it is triggered by
the udev event from the nic being setup (online).
Then if syslog is configured it is started and will forward all
kernel messages to the given syslog server.
The syslog implementation is detected automatically by finding the
appropriate binary with the following order:
rsyslogd
syslogd
syslog-ng
Then if detected the syslog.conf is generated and syslog is started.
Bootparameters:
syslogserver=ip Where to syslog to
sysloglevel=level What level has to be logged
syslogtype=rsyslog|syslog|syslogng
Don't auto detect syslog but set it
modules.d/90btrfs/module-setup.sh 0000755 00000002326 15262675530 0012727 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _rootdev
# if we don't have btrfs installed on the host system,
# no point in trying to support it in the initramfs.
require_binaries btrfs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "btrfs" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
echo udev-rules
return 0
}
# called by dracut
installkernel() {
instmods btrfs
# Make sure btfs can use fast crc32c implementations where available (bsc#1011554)
instmods crc32c-intel
}
# called by dracut
install() {
if ! inst_rules 64-btrfs.rules; then
inst_rules "$moddir/80-btrfs.rules"
case "$(btrfs --help)" in
*device\ ready*)
inst_script "$moddir/btrfs_device_ready.sh" /sbin/btrfs_finished ;;
*)
inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished ;;
esac
fi
if ! dracut_module_included "systemd"; then
inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh"
fi
inst_multiple -o btrfsck btrfs-zero-log
inst $(command -v btrfs) /sbin/btrfs
}
modules.d/90btrfs/80-btrfs.rules 0000644 00000000416 15262675530 0012364 0 ustar 00 SUBSYSTEM!="block", GOTO="btrfs_end"
ACTION!="add|change", GOTO="btrfs_end"
ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
RUN+="/sbin/btrfs device scan $env{DEVNAME}"
RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished"
LABEL="btrfs_end"
modules.d/90btrfs/btrfs_finished.sh 0000755 00000001125 15262675530 0013271 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
unset __btrfs_mount
mount -o ro "$_dev" /tmp >/dev/null 2>&1
__btrfs_mount=$?
[ $__btrfs_mount -eq 0 ] && umount "$_dev" >/dev/null 2>&1
return $__btrfs_mount
fi
return 0
}
btrfs_check_complete $1
exit $?
modules.d/90btrfs/btrfs_device_ready.sh 0000755 00000000723 15262675530 0014126 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
btrfs device ready "$_dev" >/dev/null 2>&1
return $?
fi
return 0
}
btrfs_check_complete $1
exit $?
modules.d/90btrfs/btrfs_timeout.sh 0000755 00000000216 15262675530 0013166 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
info "Scanning for all btrfs devices"
/sbin/btrfs device scan >/dev/null 2>&1
modules.d/90kernel-network-modules/module-setup.sh 0000755 00000002614 15262675530 0016224 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
# Include wired net drivers, excluding wireless
local _arch=$(uname -m)
local _net_symbols='eth_type_trans|register_virtio_device|usbnet_open'
local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
local _net_drivers
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/s390/net"
fi
if [[ $hostonly_mode == 'strict' ]] && [[ -n ${hostonly_nics+x} ]]; then
for _nic in $hostonly_nics; do
_net_drivers=$(get_dev_module /sys/class/net/$_nic)
if ! [[ $_net_drivers ]]; then
derror "--hostonly-nics contains invalid NIC '$_nic'"
continue
fi
hostonly="" instmods $_net_drivers
done
return 0
fi
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/net"
#instmods() will take care of hostonly
instmods \
=drivers/net/phy \
=drivers/net/team \
=drivers/net/ethernet \
ecb arc4 bridge stp llc ipv6 bonding 8021q ipvlan macvlan af_packet virtio_net xennet
hostonly="" instmods iscsi_ibft crc32c iscsi_boot_sysfs
}
# called by dracut
install() {
return 0
}
modules.d/00bash/module-setup.sh 0000755 00000000551 15262675530 0012511 0 ustar 00 #!/bin/bash
# called by dracut
check() {
require_binaries /bin/bash
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
# If another shell is already installed, do not use bash
[[ -x $initdir/bin/sh ]] && return
# Prefer bash as /bin/sh if it is available.
inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
}
modules.d/90multipath/module-setup.sh 0000755 00000006611 15262675530 0013617 0 ustar 00 #!/bin/bash
is_mpath() {
local _dev=$1
[ -e /sys/dev/block/$_dev/dm/uuid ] || return 1
[[ $(cat /sys/dev/block/$_dev/dm/uuid) =~ mpath- ]] && return 0
return 1
}
majmin_to_mpath_dev() {
local _dev
for i in /dev/mapper/*; do
[[ $i == /dev/mapper/control ]] && continue
_dev=$(get_maj_min $i)
if [ "$_dev" = "$1" ]; then
echo $i
return
fi
done
}
# called by dracut
check() {
local _rootdev
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_mpath || return 255
}
# if there's no multipath binary, no go.
require_binaries multipath || return 1
require_binaries kpartx || return 1
return 0
}
# called by dracut
depends() {
echo rootfs-block
echo dm
return 0
}
# called by dracut
cmdline() {
for m in scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm_multipath; do
if grep -m 1 -q "$m" /proc/modules ; then
printf 'rd.driver.pre=%s ' "$m"
fi
done
}
# called by dracut
installkernel() {
local _ret
local _arch=$(uname -m)
local _funcs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
local _s390
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
_s390drivers="=drivers/s390/scsi"
fi
hostonly='' dracut_instmods -o -s "$_funcs" "=drivers/scsi" "=drivers/md" ${_s390drivers:+"$_s390drivers"}
}
# called by dracut
install() {
local _f _allow
add_hostonly_mpath_conf() {
is_mpath $1 && {
local _dev
_dev=$(majmin_to_mpath_dev $1)
[ -z "$_dev" ] && return
strstr "$_allow" "$_dev" && return
_allow="$_allow --allow $_dev"
}
}
inst_multiple -o \
dmsetup \
kpartx \
mpath_wait \
mpathconf \
mpathpersist \
multipath \
multipathd \
xdrgetprio \
xdrgetuid \
/etc/xdrdevices.conf \
/etc/multipath.conf \
/etc/multipath/* \
/etc/multipath/conf.d/*
[[ $hostonly ]] && [[ $hostonly_mode = "strict" ]] && {
for_each_host_dev_and_slaves_all add_hostonly_mpath_conf
[ -n "$_allow" ] && mpathconf $_allow --outfile ${initdir}/etc/multipath.conf
}
inst $(command -v partx) /sbin/partx
inst_libdir_file "libmultipath*" "multipath/*"
inst_libdir_file 'libgcc_s.so*'
if [[ $hostonly_cmdline ]] ; then
local _conf=$(cmdline)
[[ $_conf ]] && echo "$_conf" >> "${initdir}/etc/cmdline.d/90multipath.conf"
fi
if dracut_module_included "systemd"; then
inst_simple "${moddir}/multipathd-configure.service" "${systemdsystemunitdir}/multipathd-configure.service"
inst_simple "${moddir}/multipathd.service" "${systemdsystemunitdir}/multipathd.service"
systemctl -q --root "$initdir" enable multipathd-configure.service
systemctl -q --root "$initdir" enable multipathd.service
else
inst_hook pre-trigger 02 "$moddir/multipathd.sh"
inst_hook cleanup 02 "$moddir/multipathd-stop.sh"
fi
inst_hook cleanup 80 "$moddir/multipathd-needshutdown.sh"
inst_hook shutdown 20 "$moddir/multipath-shutdown.sh"
inst_rules 40-multipath.rules 56-multipath.rules \
62-multipath.rules 65-multipath.rules \
66-kpartx.rules 67-kpartx-compat.rules \
11-dm-mpath.rules 11-dm-parts.rules
}
modules.d/90multipath/multipathd-configure.service 0000644 00000001210 15262675530 0016337 0 ustar 00 [Unit]
Description=Device-Mapper Multipath Default Configuration
Before=iscsi.service iscsid.service lvm2-activation-early.service
Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target
After=systemd-udev-trigger.service systemd-udev-settle.service
Before=local-fs-pre.target multipathd.service
DefaultDependencies=no
Conflicts=shutdown.target
ConditionKernelCommandLine=rd.multipath=default
ConditionPathExists=!/etc/multipath.conf
[Service]
Type=oneshot
ExecStartPre=-/usr/bin/mkdir -p /etc/multipath/multipath.conf.d
ExecStart=/usr/sbin/mpathconf --enable --user_friendly_names n
[Install]
WantedBy=sysinit.target
modules.d/90multipath/multipathd.service 0000644 00000001421 15262675530 0014364 0 ustar 00 [Unit]
Description=Device-Mapper Multipath Device Controller
Before=iscsi.service iscsid.service lvm2-activation-early.service
Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target
After=systemd-udev-trigger.service systemd-udev-settle.service
Before=local-fs-pre.target
Before=initrd-cleanup.service
DefaultDependencies=no
Conflicts=shutdown.target
Conflicts=initrd-cleanup.service
ConditionKernelCommandLine=!nompath
ConditionKernelCommandLine=!rd.multipath=0
ConditionKernelCommandLine=!rd_NO_MULTIPATH
ConditionKernelCommandLine=!multipath=off
[Service]
Type=simple
ExecStartPre=-/sbin/modprobe dm-multipath
ExecStart=/sbin/multipathd -s -d
ExecReload=/sbin/multipathd reconfigure
ExecStop=/sbin/multipathd shutdown
[Install]
WantedBy=sysinit.target
modules.d/90multipath/multipath-shutdown.sh 0000755 00000000254 15262675530 0015051 0 ustar 00 #!/bin/bash
for i in $(multipath -l -v1); do
if ! dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1' ; then
dmsetup message $i 0 fail_if_no_path
fi
done
modules.d/90multipath/multipathd-needshutdown.sh 0000755 00000000242 15262675530 0016046 0 ustar 00 #!/bin/sh
for i in $(multipath -l -v1); do
if $(dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1') ; then
need_shutdown
break
fi
done
modules.d/90multipath/multipathd-stop.sh 0000755 00000000355 15262675530 0014331 0 ustar 00 #!/bin/sh
if [ -e /etc/multipath.conf ]; then
HARD=""
while pidof multipathd >/dev/null 2>&1; do
for pid in $(pidof multipathd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
fi
modules.d/90multipath/multipathd.sh 0000755 00000000644 15262675530 0013347 0 ustar 00 #!/bin/sh
if [ "$(getarg rd.multipath)" = "default" ] && [ ! -e /etc/multipath.conf ]; then
mkdir -p /etc/multipath/multipath.conf.d
mpathconf --enable --user_friendly_names n
fi
if getargbool 1 rd.multipath -d -n rd_NO_MULTIPATH && [ -e /etc/multipath.conf ]; then
modprobe dm-multipath
multipathd -B || multipathd
need_shutdown
else
rm -- /etc/udev/rules.d/??-multipath.rules 2>/dev/null
fi
modules.d/35network-legacy/module-setup.sh 0000755 00000005500 15262675530 0014536 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _program
require_binaries ip dhclient sed awk grep || return 1
require_any_binary arping arping2 || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
return 0
}
# called by dracut
install() {
local _arch _i _dir
inst_multiple ip dhclient sed awk grep
inst_multiple -o arping arping2
strstr "$(arping 2>&1)" "ARPing 2" && mv "$initdir/bin/arping" "$initdir/bin/arping2"
inst_multiple -o ping ping6
inst_multiple -o teamd teamdctl teamnl
inst_simple /etc/libnl/classid
inst_script "$moddir/ifup.sh" "/sbin/ifup"
inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
inst_simple -H "/etc/dhclient.conf"
cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf"
inst_hook pre-udev 60 "$moddir/net-genrules.sh"
inst_hook cmdline 92 "$moddir/parse-ibft.sh"
inst_hook cmdline 95 "$moddir/parse-vlan.sh"
inst_hook cmdline 96 "$moddir/parse-bond.sh"
inst_hook cmdline 96 "$moddir/parse-team.sh"
inst_hook cmdline 97 "$moddir/parse-bridge.sh"
inst_hook cmdline 98 "$moddir/parse-ip-opts.sh"
inst_hook cmdline 99 "$moddir/parse-ifname.sh"
inst_hook cleanup 10 "$moddir/kill-dhclient.sh"
# install all config files for teaming
unset TEAM_MASTER
unset TEAM_CONFIG
unset TEAM_PORT_CONFIG
unset HWADDR
unset SUBCHANNELS
for i in /etc/sysconfig/network-scripts/ifcfg-*; do
[ -e "$i" ] || continue
case "$i" in
*~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
continue
;;
esac
(
. "$i"
if ! [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ] \
&& [ -n "${TEAM_MASTER}${TEAM_CONFIG}${TEAM_PORT_CONFIG}" ]; then
if [ -n "$TEAM_CONFIG" ] && [ -n "$DEVICE" ]; then
mkdir -p $initdir/etc/teamd
printf -- "%s" "$TEAM_CONFIG" > "$initdir/etc/teamd/${DEVICE}.conf"
elif [ -n "$TEAM_PORT_CONFIG" ]; then
inst_simple "$i"
HWADDR="$(echo $HWADDR | sed 'y/ABCDEF/abcdef/')"
if [ -n "$HWADDR" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/mac-${HWADDR}.conf"
fi
SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
if [ -n "$SUBCHANNELS" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf"
fi
fi
fi
)
done
_arch=$(uname -m)
inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
dracut_need_initqueue
}
modules.d/35network-legacy/dhclient-script.sh 0000755 00000022676 15262675530 0015224 0 ustar 00 #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# We already need a set netif here
netif=$interface
setup_interface() {
ip=$new_ip_address
mtu=$new_interface_mtu
mask=$new_subnet_mask
bcast=$new_broadcast_address
gw=${new_routers%%,*}
domain=$new_domain_name
search=$(printf -- "$new_domain_search")
namesrv=$new_domain_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
# Taken from debian dhclient-script:
# The 576 MTU is only used for X.25 and dialup connections
# where the admin wants low latency. Such a low MTU can cause
# problems with UDP traffic, among other things. As such,
# disallow MTUs from 576 and below by default, so that broken
# MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then
if ! ip link set $netif mtu $mtu ; then
ip link set $netif down
ip link set $netif mtu $mtu
linkup $netif
fi
fi
ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
if [ -n "$gw" ] ; then
if [ "$mask" = "255.255.255.255" ] ; then
# point-to-point connection => set explicit route to gateway
printf 'ip route add %q dev %q\n' "$gw" "$netif" > /tmp/net."$netif".gw
fi
echo "$gw" | {
IFS=' ' read -r main_gw other_gw
printf 'ip route replace default via %q dev %q\n' "$main_gw" "$netif" >> /tmp/net."$netif".gw
if [ -n "$other_gw" ] ; then
for g in $other_gw; do
printf 'ip route add default via %q dev %q\n' "$g" "$netif" >> /tmp/net."$netif".gw
done
fi
}
fi
if getargbool 1 rd.peerdns; then
if [ -n "${search}${domain}" ]; then
echo "search $search $domain" > /tmp/net."$netif".resolv.conf
fi
if [ -n "$namesrv" ]; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
fi
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname%."$domain"}${domain:+.$domain}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
}
setup_interface6() {
domain=$new_domain_name
search=$(printf -- "$new_dhcp6_domain_search")
namesrv=$new_dhcp6_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
dev ${netif} scope global \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
if getargbool 1 rd.peerdns; then
if [ -n "${search}${domain}" ]; then
echo "search $search $domain" > /tmp/net."$netif".resolv.conf
fi
if [ -n "$namesrv" ]; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
fi
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname%."$domain"}${domain:+.$domain}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
}
parse_option_121() {
while [ $# -ne 0 ]; do
mask="$1"
shift
# Is the destination a multicast group?
if [ $1 -ge 224 -a $1 -lt 240 ]; then
multicast=1
else
multicast=0
fi
# Parse the arguments into a CIDR net/mask string
if [ $mask -gt 24 ]; then
destination="$1.$2.$3.$4/$mask"
shift; shift; shift; shift
elif [ $mask -gt 16 ]; then
destination="$1.$2.$3.0/$mask"
shift; shift; shift
elif [ $mask -gt 8 ]; then
destination="$1.$2.0.0/$mask"
shift; shift
elif [ $mask -gt 0 ]; then
destination="$1.0.0.0/$mask"
shift
else
destination="0.0.0.0/$mask"
fi
# Read the gateway
gateway="$1.$2.$3.$4"
shift; shift; shift; shift
# Multicast routing on Linux
# - If you set a next-hop address for a multicast group, this breaks with Cisco switches
# - If you simply leave it link-local and attach it to an interface, it works fine.
if [ $multicast -eq 1 -o "$gateway" = "0.0.0.0" ]; then
temp_result="$destination dev $interface"
else
temp_result="$destination via $gateway dev $interface"
fi
echo "/sbin/ip route add $temp_result"
done
}
case $reason in
PREINIT)
echo "dhcp: PREINIT $netif up"
linkup $netif
;;
PREINIT6)
echo "dhcp: PREINIT6 $netif up"
linkup $netif
wait_for_ipv6_dad_link $netif
;;
BOUND)
echo "dhcp: BOND setting $netif"
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ]; then
if command -v arping2 >/dev/null; then
if arping2 -q -C 1 -c 2 -I $netif -0 $new_ip_address ; then
warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
exit 1
fi
else
if ! arping -f -q -D -c 2 -I $netif $new_ip_address ; then
warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
exit 1
fi
fi
fi
unset layer2
setup_interface
set | while read line || [ -n "$line" ]; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
if [ -n "$new_classless_static_routes" ]; then
OLDIFS="$IFS"
IFS=".$IFS"
parse_option_121 $new_classless_static_routes
IFS="$OLDIFS"
fi
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW|REBIND)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -4 addr change ${new_ip_address}/${new_subnet_mask} broadcast ${new_broadcast_address} dev ${interface} \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
BOUND6)
echo "dhcp: BOND6 setting $netif"
setup_interface6
set | while read line || [ -n "$line" ]; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW6|REBIND6)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -6 addr change ${new_ip6_address}/${new_ip6_prefixlen} dev ${interface} scope global \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
*) echo "dhcp: $reason";;
esac
exit 0
modules.d/35network-legacy/parse-vlan.sh 0000755 00000001226 15262675530 0014164 0 ustar 00 #!/bin/sh
#
# Format:
# vlan=:
#
parsevlan() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset vlanname phydevice
case $# in
2) vlanname=$1; phydevice=$2 ;;
*) die "vlan= requires two parameters" ;;
esac
}
for vlan in $(getargs vlan=); do
unset vlanname
unset phydevice
if [ ! "$vlan" = "vlan" ]; then
parsevlan "$vlan"
fi
echo "phydevice=\"$phydevice\"" > /tmp/vlan.${phydevice}.phy
{
echo "vlanname=\"$vlanname\""
echo "phydevice=\"$phydevice\""
} > /tmp/vlan.${vlanname}.${phydevice}
done
modules.d/35network-legacy/ifup.sh 0000755 00000036617 15262675530 0013073 0 ustar 00 #!/bin/sh
#
# We don't need to check for ip= errors here, that is handled by the
# cmdline parser script
#
# without $2 means this is for real netroot case
# or it is for manually bring up network ie. for kdump scp vmcore
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? No $1?
[ -z "$1" ] && exit 1
# $netif reads easier than $1
netif=$1
# loopback is always handled the same way
if [ "$netif" = "lo" ] ; then
ip link set lo up
ip addr add 127.0.0.1/8 dev lo
exit 0
fi
# Run dhclient
do_dhcp() {
# dhclient-script will mark the netif up and generate the online
# event for nfsroot
# XXX add -V vendor class and option parsing per kernel
local _COUNT=0
local _timeout=$(getargs rd.net.timeout.dhcp=)
local _DHCPRETRY=$(getargs rd.net.dhcp.retry=)
_DHCPRETRY=${_DHCPRETRY:-1}
[ -e /tmp/dhclient.$netif.pid ] && return 0
if ! iface_has_carrier $netif; then
warn "No carrier detected on interface $netif"
return 1
fi
if [ ! -e /run/NetworkManager/conf.d/10-dracut-dhclient.conf ]; then
mkdir -p /run/NetworkManager/conf.d
echo '[main]' > /run/NetworkManager/conf.d/10-dracut-dhclient.conf
echo 'dhcp=dhclient' >>/run/NetworkManager/conf.d/10-dracut-dhclient.conf
fi
while [ $_COUNT -lt $_DHCPRETRY ]; do
info "Starting dhcp for interface $netif"
dhclient "$@" \
${_timeout:+--timeout $_timeout} \
-q \
-1 \
-cf /etc/dhclient.conf \
-pf /tmp/dhclient.$netif.pid \
-lf /tmp/dhclient.$netif.lease \
$netif \
&& return 0
_COUNT=$(($_COUNT+1))
[ $_COUNT -lt $_DHCPRETRY ] && sleep 1
done
warn "dhcp for interface $netif failed"
# nuke those files since we failed; we might retry dhcp again if it's e.g.
# `ip=dhcp,dhcp6` and we check for the PID file at the top
rm -f /tmp/dhclient.$netif.{pid,lease}
return 1
}
load_ipv6() {
[ -d /proc/sys/net/ipv6 ] && return
modprobe ipv6
i=0
while [ ! -d /proc/sys/net/ipv6 ]; do
i=$(($i+1))
[ $i -gt 10 ] && break
sleep 0.1
done
}
do_ipv6auto() {
local ret
load_ipv6
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
linkup $netif
wait_for_ipv6_auto $netif
ret=$?
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
return "$ret"
}
# Handle static ip configuration
do_static() {
strglobin $ip '*:*:*' && load_ipv6
if ! iface_has_carrier "$netif"; then
warn "No carrier detected on interface $netif"
return 1
elif ! linkup "$netif"; then
warn "Could not bring interface $netif up!"
return 1
fi
ip route get "$ip" 2>/dev/null | {
read a rest
if [ "$a" = "local" ]; then
warn "Not assigning $ip to interface $netif, cause it is already assigned!"
return 1
fi
return 0
} || return 1
[ -n "$macaddr" ] && ip link set address $macaddr dev $netif
[ -n "$mtu" ] && ip link set mtu $mtu dev $netif
if strglobin $ip '*:*:*'; then
# note no ip addr flush for ipv6
ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
wait_for_ipv6_dad $netif
else
if [ -z "$srv" ]; then
if command -v arping2 >/dev/null; then
if arping2 -q -C 1 -c 2 -I $netif -0 $ip ; then
warn "Duplicate address detected for $ip for interface $netif."
return 1
fi
else
if ! arping -f -q -D -c 2 -I $netif $ip ; then
warn "Duplicate address detected for $ip for interface $netif."
return 1
fi
fi
fi
ip addr flush dev $netif
ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
fi
[ -n "$gw" ] && printf "ip route replace default via %q dev %q\n" "$gw" "$netif" > "/tmp/net.${netif}.gw"
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
return 0
}
get_vid() {
case "$1" in
vlan*)
echo ${1#vlan}
;;
*.*)
echo ${1##*.}
;;
esac
}
# check, if we need VLAN's for this interface
if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then
unset DO_VLAN
NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif"
modprobe -b -q 8021q
for i in /tmp/vlan.*.${netif}; do
[ -e "$i" ] || continue
unset vlanname
unset phydevice
. "$i"
if [ -n "$vlanname" ]; then
linkup "$phydevice"
ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)"
ifup "$vlanname"
fi
done
exit 0
fi
# Check, if interface is VLAN interface
if ! [ -e /tmp/vlan.${netif}.phy ]; then
for i in /tmp/vlan.${netif}.*; do
[ -e "$i" ] || continue
export DO_VLAN=yes
break
done
fi
# bridge this interface?
if [ -z "$NO_BRIDGE_MASTER" ]; then
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
for ethname in $bridgeslaves ; do
[ "$netif" != "$ethname" ] && continue
NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname
linkup $ethname
if [ ! -e /tmp/bridge.$bridgename.up ]; then
ip link add name $bridgename type bridge
echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay
> /tmp/bridge.$bridgename.up
fi
ip link set dev $ethname master $bridgename
ifup $bridgename
exit 0
done
done
fi
# enslave this interface to bond?
if [ -z "$NO_BOND_MASTER" ]; then
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
for slave in $bondslaves ; do
[ "$netif" != "$slave" ] && continue
# already setup
[ -e /tmp/bond.$bondname.up ] && exit 0
# wait for all slaves to show up
for slave in $bondslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
modprobe -q -b bonding
echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null
ip link set $bondname down
# Stolen from ifup-eth
# add the bits to setup driver parameters here
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
# %{value:0:1} is replaced with non-bash specific construct
if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then
OLDIFS=$IFS;
IFS=',';
for arp_ip in $value; do
echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key
done
IFS=$OLDIFS;
else
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
linkup $bondname
for slave in $bondslaves ; do
cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr
ip link set $slave down
echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
linkup $slave
done
# Set mtu on bond master
[ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname
# add the bits to setup the needed post enslavement parameters
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
if [ "${key}" = "primary" ]; then
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
> /tmp/bond.$bondname.up
NO_BOND_MASTER=yes ifup $bondname
exit $?
done
done
fi
if [ -z "$NO_TEAM_MASTER" ]; then
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teammaster
unset teamslaves
. "$i"
for slave in $teamslaves ; do
[ "$netif" != "$slave" ] && continue
[ -e /tmp/team.$teammaster.up ] && exit 0
# wait for all slaves to show up
for slave in $teamslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
if [ ! -e /tmp/team.$teammaster.up ] ; then
# We shall only bring up those _can_ come up
# in case of some slave is gone in active-backup mode
working_slaves=""
for slave in $teamslaves ; do
teamdctl ${teammaster} port present ${slave} 2>/dev/null \
&& continue
ip link set dev $slave up 2>/dev/null
if wait_for_if_up $slave; then
working_slaves="$working_slaves$slave "
fi
done
# Do not add slaves now
teamd -d -U -n -N -t $teammaster -f /etc/teamd/${teammaster}.conf
for slave in $working_slaves; do
# team requires the slaves to be down before joining team
ip link set dev $slave down
(
unset TEAM_PORT_CONFIG
_hwaddr=$(cat /sys/class/net/$slave/address)
_subchannels=$(iface_get_subchannels "$slave")
if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then
. "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf"
elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then
. "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf"
elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then
. "/etc/sysconfig/network-scripts/ifcfg-${slave}"
fi
if [ -n "${TEAM_PORT_CONFIG}" ]; then
/usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}"
fi
)
teamdctl $teammaster port add $slave
done
ip link set dev $teammaster up
> /tmp/team.$teammaster.up
NO_TEAM_MASTER=yes ifup $teammaster
exit $?
fi
done
done
fi
# all synthetic interfaces done.. now check if the interface is available
if ! ip link show dev $netif >/dev/null 2>&1; then
exit 1
fi
# disable manual ifup while netroot is set for simplifying our logic
# in netroot case we prefer netroot to bringup $netif automaticlly
[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
if [ -n "$manualup" ]; then
: > "/tmp/net.${netif}.manualup"
rm -f "/tmp/net.${netif}.did-setup"
else
[ -e /tmp/net.${netif}.did-setup ] && exit 0
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
fi
# No ip lines default to dhcp
ip=$(getarg ip)
if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then
if [ "$netroot" = "dhcp6" ]; then
do_dhcp -6
else
do_dhcp -4
fi
for s in $(getargs nameserver); do
[ -n "$s" ] || continue
echo nameserver $s >> /tmp/net.$netif.resolv.conf
done
fi
# Specific configuration, spin through the kernel command line
# looking for ip= lines
for p in $(getargs ip=); do
ip_to_var $p
# skip ibft
[ "$autoconf" = "ibft" ] && continue
case "$dev" in
??:??:??:??:??:??) # MAC address
_dev=$(iface_for_mac $dev)
[ -n "$_dev" ] && dev="$_dev"
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
_dev=$(iface_for_mac $(fix_bootif $dev))
[ -n "$_dev" ] && dev="$_dev"
;;
esac
# If this option isn't directed at our interface, skip it
if [ -n "$dev" ]; then
if [ "$dev" != "$netif" ]; then
[ ! -e "/sys/class/net/$dev" ] \
&& warn "Network interface '$dev' does not exist!"
continue
fi
else
iface_is_enslaved "$netif" && continue
fi
# Store config for later use
for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do
eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
done > "/tmp/net.${netif}.override"
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
dhcp|on|any)
do_dhcp -4 ;;
dhcp6)
load_ipv6
do_dhcp -6 ;;
auto6)
do_ipv6auto ;;
either6)
do_ipv6auto || do_dhcp -6 ;;
*)
do_static ;;
esac
done
ret=$?
# setup nameserver
for s in "$dns1" "$dns2" $(getargs nameserver); do
[ -n "$s" ] || continue
echo "nameserver $s" >> "/tmp/net.${netif}.resolv.conf"
done
if [ $ret -eq 0 ]; then
> /tmp/net.${netif}.up
if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
# and finally, finish interface set up if there isn't already a script
# to do so (which is the case in the dhcp path)
if [ ! -e $hookdir/initqueue/setup_net_$netif.sh ]; then
setup_net $netif
source_hook initqueue/online $netif
if [ -z "$manualup" ]; then
/sbin/netroot $netif
fi
fi
exit $ret
fi
done
# no ip option directed at our interface?
if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then
if [ -e /tmp/net.bootdev ]; then
BOOTDEV=$(cat /tmp/net.bootdev)
if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then
load_ipv6
do_dhcp
fi
else
if getargs 'ip=dhcp6'; then
load_ipv6
do_dhcp -6
fi
if getargs 'ip=dhcp'; then
do_dhcp -4
fi
fi
fi
exit 0
modules.d/35network-legacy/parse-ip-opts.sh 0000755 00000011526 15262675530 0014623 0 ustar 00 #!/bin/sh
#
# Format:
# ip=[dhcp|on|any]
#
# ip=:[dhcp|on|any][:[][:]]
#
# ip=::::::{dhcp|on|any|none|off}[:[][:]]
#
# When supplying more than only ip= line, is mandatory and
# bootdev= must contain the name of the primary interface to use for
# routing,dns,dhcp-options,etc.
#
command -v getarg >/dev/null || . /lib/dracut-lib.sh
if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
# No ip= argument(s) for netroot provided, defaulting to DHCP
return;
fi
# Count ip= lines to decide whether we need bootdev= or not
if [ -z "$NEEDBOOTDEV" ] ; then
count=0
for p in $(getargs ip=); do
case "$p" in
ibft)
continue;;
esac
count=$(( $count + 1 ))
done
[ $count -gt 1 ] && NEEDBOOTDEV=1
fi
unset count
# If needed, check if bootdev= contains anything usable
BOOTDEV=$(getarg bootdev=)
if [ -n "$NEEDBOOTDEV" ] && getargbool 1 rd.neednet; then
#[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf
info "Multiple ip= arguments: assuming rd.neednet=1"
else
unset NEEDBOOTDEV
fi
# Check ip= lines
# XXX Would be nice if we could errorcheck ip addresses here as well
for p in $(getargs ip=); do
ip_to_var $p
# make first device specified the BOOTDEV
if [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
BOOTDEV="$dev"
info "Setting bootdev to '$BOOTDEV'"
fi
# skip ibft since we did it above
[ "$autoconf" = "ibft" ] && continue
# Empty autoconf defaults to 'dhcp'
if [ -z "$autoconf" ] ; then
warn "Empty autoconf values default to dhcp"
autoconf="dhcp"
fi
# Error checking for autoconf in combination with other values
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
error) die "Error parsing option 'ip=$p'";;
bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
none|off)
[ -z "$ip" ] && \
die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
[ -z "$mask" ] && \
die "Sorry, automatic calculation of netmask is not yet supported"
;;
auto6);;
either6);;
dhcp|dhcp6|on|any) \
[ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
[ -n "$ip" ] && \
die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
;;
*) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
esac
done
if [ -n "$dev" ] ; then
# We don't like duplicate device configs
if [ -n "$IFACES" ] ; then
for i in $IFACES ; do
[ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
done
fi
# IFACES list for later use
IFACES="$IFACES $dev"
# Interface should exist
if [ ! -e "/sys/class/net/$dev" ]; then
warn "Network interface '$dev' does not exist"
fi
fi
# Do we need to check for specific options?
if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
# Correct device? (Empty is ok as well)
[ "$dev" = "$BOOTDEV" ] || continue
# Server-ip is there?
[ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
# dhcp? (It's simpler to check for a set ip. Checks above ensure that if
# ip is there, we're static
[ -z "$ip" ] && continue
# Not good!
die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
fi
if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then
printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \
"$dev" \
"${dev:3:2}" \
"${dev:5:2}" \
"${dev:7:2}" \
"${dev:9:2}" \
"${dev:11:2}" \
"${dev:13:2}" >> /etc/cmdline.d/80-enx.conf
fi
done
# put BOOTIF in IFACES to make sure it comes up
if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
BOOTDEV=$(fix_bootif $BOOTIF)
IFACES="$BOOTDEV $IFACES"
fi
# This ensures that BOOTDEV is always first in IFACES
if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
IFACES="$BOOTDEV $IFACES"
fi
# Store BOOTDEV and IFACES for later use
[ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
[ -n "$IFACES" ] && echo $IFACES > /tmp/net.ifaces
modules.d/35network-legacy/parse-bridge.sh 0000755 00000002144 15262675530 0014460 0 ustar 00 #!/bin/sh
#
# Format:
# bridge=:
#
# is a comma-separated list of physical (ethernet) interfaces
# bridge without parameters assumes bridge=br0:eth0
#
parsebridge() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bridgename=br0; bridgeslaves=$iface ;;
1) die "bridge= requires two parameters" ;;
2) bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
*) die "bridge= requires two parameters" ;;
esac
}
# Parse bridge for bridgename and bridgeslaves
for bridge in $(getargs bridge=); do
unset bridgename
unset bridgeslaves
iface=eth0
# Read bridge= parameters if they exist
if [ "$bridge" != "bridge" ]; then
parsebridge $bridge
fi
# Simple default bridge
if [ -z "$bridgename" ]; then
bridgename=br0
bridgeslaves=$iface
fi
echo "bridgename=$bridgename" > /tmp/bridge.${bridgename}.info
echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.${bridgename}.info
done
modules.d/35network-legacy/kill-dhclient.sh 0000755 00000000374 15262675530 0014642 0 ustar 00 #!/bin/sh
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill $PID >/dev/null 2>&1
done
sleep 0.1
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill -9 $PID >/dev/null 2>&1
done
modules.d/35network-legacy/parse-bond.sh 0000755 00000003727 15262675530 0014156 0 ustar 00 #!/bin/sh
#
# Format:
# bond=[:[:[:]]]
#
# bondslaves is a comma-separated list of physical (ethernet) interfaces
# options is a comma-separated list on bonding options (modinfo bonding for details) in format compatible with initscripts
# if options include multi-valued arp_ip_target option, then its values should be separated by semicolon.
#
# bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
#
# if the mtu is specified, it will be set on the bond master
#
# We translate list of slaves to space-separated here to make it easier to loop over them in ifup
# Ditto for bonding options
parsebond() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bondname=bond0; bondslaves="eth0 eth1" ;;
1) bondname=$1; bondslaves="eth0 eth1" ;;
2) bondname=$1; bondslaves=$(str_replace "$2" "," " ") ;;
3) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " ") ;;
4) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " "); bondmtu=$4;;
*) die "bond= requires zero to four parameters" ;;
esac
}
# Parse bond for bondname, bondslaves, bondmode, bondoptions and bondmtu
for bond in $(getargs bond=); do
unset bondname
unset bondslaves
unset bondoptions
unset bondmtu
if [ "$bond" != "bond" ]; then
parsebond "$bond"
fi
# Simple default bond
if [ -z "$bondname" ]; then
bondname=bond0
bondslaves="eth0 eth1"
fi
# Make it suitable for initscripts export
bondoptions=$(str_replace "$bondoptions" ";" ",")
echo "bondname=$bondname" > /tmp/bond.${bondname}.info
echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info
echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info
echo "bondmtu=\"$bondmtu\"" >> /tmp/bond.${bondname}.info
done
modules.d/35network-legacy/parse-ibft.sh 0000755 00000000433 15262675530 0014147 0 ustar 00 #!/bin/sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
ibft_to_cmdline
fi
modules.d/35network-legacy/dhclient.conf 0000644 00000000457 15262675530 0014223 0 ustar 00
option classless-static-routes code 121 = array of unsigned integer 8;
send dhcp-client-identifier = hardware;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu, classless-static-routes;
modules.d/35network-legacy/net-genrules.sh 0000755 00000010015 15262675530 0014520 0 ustar 00 #!/bin/sh
getargbool 0 rd.neednet && NEEDNET=1
# Don't continue if we don't need network
if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then
return
fi
command -v fix_bootif >/dev/null || . /lib/net-lib.sh
# Write udev rules
{
# bridge: attempt only the defined interface
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
RAW_IFACES="$RAW_IFACES $bridgeslaves"
MASTER_IFACES="$MASTER_IFACES $bridgename"
done
# bond: attempt only the defined interface (override bridge defines)
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
# It is enough to fire up only one
RAW_IFACES="$RAW_IFACES $bondslaves"
MASTER_IFACES="$MASTER_IFACES ${bondname}"
done
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teamslaves
unset teammaster
. "$i"
RAW_IFACES="$RAW_IFACES ${teamslaves}"
MASTER_IFACES="$MASTER_IFACES ${teammaster}"
done
for i in /tmp/vlan.*.phy; do
[ -e "$i" ] || continue
unset phydevice
. "$i"
RAW_IFACES="$RAW_IFACES $phydevice"
for j in /tmp/vlan.*.${phydevice}; do
[ -e "$j" ] || continue
unset vlanname
. "$j"
MASTER_IFACES="$MASTER_IFACES ${vlanname}"
done
done
MASTER_IFACES="$(trim "$MASTER_IFACES")"
RAW_IFACES="$(trim "$RAW_IFACES")"
if [ -z "$IFACES" ]; then
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
fi
if [ -e /tmp/net.bootdev ]; then
bootdev=$(cat /tmp/net.bootdev)
fi
ifup='/sbin/ifup $env{INTERFACE}'
runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
# We have some specific interfaces to handle
if [ -n "${RAW_IFACES}${IFACES}" ]; then
echo 'SUBSYSTEM!="net", GOTO="net_end"'
echo 'ACTION!="add|change|move", GOTO="net_end"'
for iface in $IFACES $RAW_IFACES; do
case "$iface" in
??:??:??:??:??:??) # MAC address
cond="ATTR{address}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
cond="ATTR{address}==\"$(fix_bootif $iface)\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
*) # an interface name
cond="ENV{INTERFACE}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
cond="NAME==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
esac
# The GOTO prevents us from trying to ifup the same device twice
done
echo 'LABEL="net_end"'
for iface in $IFACES; do
if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
if [ -n "$netroot" ] && [ -n "$DRACUT_SYSTEMD" ]; then
echo "systemctl is-active initrd-root-device.target || [ -f /tmp/net.${iface}.did-setup ]"
else
echo "[ -f /tmp/net.${iface}.did-setup ]"
fi >$hookdir/initqueue/finished/wait-$iface.sh
fi
done
# Default: We don't know the interface to use, handle all
# Fixme: waiting for the interface as well.
else
cond='ACTION=="add", SUBSYSTEM=="net", ENV{DEVTYPE}!="wlan|wwan"'
# if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh
echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules
if [ "$NEEDNET" = "1" ]; then
echo 'for i in /tmp/net.*.did-setup; do [ -f "$i" ] && exit 0; done; exit 1' >$hookdir/initqueue/finished/wait-network.sh
fi
fi
# if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh
} > /etc/udev/rules.d/90-net.rules
modules.d/35network-legacy/parse-team.sh 0000755 00000003100 15262675530 0014143 0 ustar 00 #!/bin/sh
#
# Format:
# team=:[:]
#
# teamslaves is a comma-separated list of physical (ethernet) interfaces
# teamrunner is the runner type to be used (see teamd.conf(5)); defaults to activebackup
#
# team without parameters assumes team=team0:eth0,eth1:activebackup
#
parseteam() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) teammaster=team0; teamslaves="eth0 eth1"; teamrunner="activebackup" ;;
1) teammaster=$1; teamslaves="eth0 eth1"; teamrunner="activebackup" ;;
2) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner="activebackup" ;;
3) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner=$3 ;;
*) die "team= requires zero to three parameters" ;;
esac
return 0
}
for team in $(getargs team); do
[ "$team" = "team" ] && continue
unset teammaster
unset teamslaves
unset teamrunner
parseteam "$team" || continue
echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info
echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info
echo "teamrunner=\"$teamrunner\"" >> /tmp/team.${teammaster}.info
if ! [ -e /etc/teamd/${teammaster}.conf ]; then
warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using $teamrunner."
mkdir -p /etc/teamd
printf -- "%s" "{\"runner\": {\"name\": \"$teamrunner\"}, \"link_watch\": {\"name\": \"ethtool\"}}" > "/tmp/${teammaster}.conf"
fi
done
modules.d/35network-legacy/parse-ifname.sh 0000755 00000001050 15262675530 0014456 0 ustar 00 #!/bin/sh
#
# Format:
# ifname=:
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# ifname=eth0:4a:3f:4c:04:f8:d7
#
# Note when using ifname= to get persistent interface names, you must specify
# an ifname= argument for each interface used in an ip= or fcoe= argument
# check if there are any ifname parameters
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
# Check ifname= lines
for p in $(getargs ifname=); do
parse_ifname_opts $p
done
modules.d/80lvmmerge/module-setup.sh 0000755 00000000650 15262675530 0013422 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm dd swapoff || return 1
return 255
}
# called by dracut
depends() {
echo lvm dracut-systemd systemd
return 0
}
installkernel() {
hostonly="" instmods dm-snapshot
}
# called by dracut
install() {
inst_multiple dd swapoff
inst_hook cleanup 01 "$moddir/lvmmerge.sh"
}
modules.d/80lvmmerge/README.md 0000644 00000004055 15262675530 0011722 0 ustar 00 # lvmmerge - dracut module
## Preparation
- ensure that the lvm thin pool is big enough
- backup any (most likely /boot and /boot/efi) device with:
```
# mkdir /restoredev
# dev=; umount $dev; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev"); mount $dev
```
- backup the MBR
```
# dev=; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1
# ls -l /dev/disk/by-path/virtio-pci-0000\:00\:07.0
lrwxrwxrwx. 1 root root 9 Jul 24 04:27 /dev/disk/by-path/virtio-pci-0000:00:07.0 -> ../../vda
```
- backup some partitions
```
# dev=/dev/disk/by-path/virtio-pci-0000:00:07.0
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1
# umount /boot/efi
# dev=/dev/disk/by-partuuid/687177a8-86b3-4e37-a328-91d20db9563c
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev")
# umount /boot
# dev=/dev/disk/by-partuuid/4fdf99e9-4f28-4207-a26f-c76546824eaf
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev")
```
Final /restoredev
```
# ls -al /restoredev/
total 1253380
drwx------. 2 root root 250 Jul 24 04:38 .
dr-xr-xr-x. 18 root root 242 Jul 24 04:32 ..
-rw-------. 1 root root 209715200 Jul 24 04:34 dev-disk-by\x2dpartuuid-4fdf99e9\x2d4f28\x2d4207\x2da26f\x2dc76546824eaf
-rw-------. 1 root root 1073741824 Jul 24 04:34 dev-disk-by\x2dpartuuid-687177a8\x2d86b3\x2d4e37\x2da328\x2d91d20db9563c
-rw-------. 1 root root 446 Jul 24 04:38 dev-disk-by\x2dpath-virtio\x2dpci\x2d0000:00:07.0
```
- make a thin snapshot
```
# lvm lvcreate -pr -s rhel/root --name reset
```
- mark the snapshot with a tag
```
# lvm lvchange --addtag reset rhel/reset
```
- remove /restoredev
```
# rm -fr /restoredev
```
## Operation
If a boot entry with ```rd.lvm.mergetags=``` is selected and there are LVs with ``````
dracut will
- make a copy of the snapshot
- merge it back to the original
- rename the copy back to the name of the snapshot
- if /restordev appears in the root, then it will restore the images
found in that directory. This can be used to restore /boot and /boot/efi and the
MBR of the boot device
modules.d/80lvmmerge/lvmmerge.sh 0000755 00000006017 15262675530 0012620 0 ustar 00 #!/bin/bash
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
do_merge() {
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' \
/etc/lvm/lvm.conf
systemctl --no-block stop sysroot.mount
swapoff -a
umount -R /sysroot
for tag in $(getargs rd.lvm.mergetags); do
lvm vgs --noheadings -o vg_name | \
while read -r vg || [[ -n $vg ]]; do
unset LVS
declare -a LVS
lvs=$(lvm lvs --noheadings -o lv_name "$vg")
for lv in $lvs; do
lvm lvchange -an "$vg/$lv"
tags=$(trim "$(lvm lvs --noheadings -o lv_tags "$vg/$lv")")
strstr ",${tags}," ",${tag}," || continue
if ! lvm lvs --noheadings -o lv_name "${vg}/${lv}_dracutsnap" &>/dev/null; then
info "Creating backup ${lv}_dracutsnap of ${vg}/${lv}"
lvm lvcreate -pr -s "${vg}/${lv}" --name "${lv}_dracutsnap"
fi
lvm lvchange --addtag "$tag" "${vg}/${lv}_dracutsnap"
info "Merging back ${vg}/${lv} to the original LV"
lvm lvconvert --merge "${vg}/${lv}"
LVS+=($lv)
done
systemctl --no-block stop sysroot.mount
udevadm settle
for ((i=0; i < 100; i++)); do
lvm vgchange -an "$vg" && break
sleep 0.5
done
udevadm settle
lvm vgchange -ay "$vg"
udevadm settle
for lv in "${LVS[@]}"; do
info "Renaming ${lv}_dracutsnap backup to ${vg}/${lv}"
lvm lvrename "$vg" "${lv}_dracutsnap" "${lv}"
done
udevadm settle
done
done
systemctl --no-block reset-failed systemd-fsck-root
systemctl --no-block start systemd-fsck-root
systemctl --no-block reset-failed sysroot.mount
systemctl --no-block start sysroot.mount
for ((i=0; i < 100; i++)); do
[[ -d /sysroot/dev ]] && break
sleep 0.5
systemctl --no-block start sysroot.mount
done
if [[ -d /sysroot/restoredev ]]; then
(
if cd /sysroot/restoredev; then
# restore devices and partitions
for i in *; do
target=$(systemd-escape -pu "$i")
if ! [[ -b $target ]]; then
warn "Not restoring $target, as the device does not exist"
continue
fi
# Just in case
umount "$target" &> /dev/null
info "Restoring $target"
dd if="$i" of="$target" |& vinfo
done
fi
)
mount -o remount,rw /sysroot
rm -fr /sysroot/restoredev
fi
info "Rebooting"
reboot
}
if getarg rd.lvm.mergetags; then
do_merge
fi
modules.d/04watchdog/module-setup.sh 0000755 00000001754 15262675530 0013406 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo watchdog-modules
return 0
}
# called by dracut
install() {
# Do not add watchdog hooks if systemd module is included
# In that case, systemd will manage watchdog kick
if ! dracut_module_included "systemd"; then
inst_hook cmdline 00 "$moddir/watchdog.sh"
inst_hook cmdline 50 "$moddir/watchdog.sh"
inst_hook pre-trigger 00 "$moddir/watchdog.sh"
inst_hook initqueue 00 "$moddir/watchdog.sh"
inst_hook mount 00 "$moddir/watchdog.sh"
inst_hook mount 50 "$moddir/watchdog.sh"
inst_hook mount 99 "$moddir/watchdog.sh"
inst_hook pre-pivot 00 "$moddir/watchdog.sh"
inst_hook pre-pivot 99 "$moddir/watchdog.sh"
inst_hook cleanup 00 "$moddir/watchdog.sh"
inst_hook cleanup 99 "$moddir/watchdog.sh"
fi
inst_hook emergency 02 "$moddir/watchdog-stop.sh"
inst_multiple -o wdctl
}
modules.d/04watchdog/watchdog-stop.sh 0000755 00000000075 15262675530 0013541 0 ustar 00 #!/bin/sh
[ -c /dev/watchdog ] && printf 'V' > /dev/watchdog
modules.d/04watchdog/watchdog.sh 0000755 00000000365 15262675530 0012560 0 ustar 00 #!/bin/sh
if [ -e /dev/watchdog ]; then
if [ ! -e /tmp/watchdog_timeout ]; then
wdctl -s 60 /dev/watchdog >/dev/null 2>&1
> /tmp/watchdog_timeout
fi
info "Triggering watchdog"
>/dev/watchdog
else
modprobe ib700wdt
modprobe i6300esb
fi
modules.d/99earlykdump/module-setup.sh 0000755 00000003310 15262675530 0013767 0 ustar 00 #!/bin/bash
. /etc/sysconfig/kdump
KDUMP_KERNEL=""
KDUMP_INITRD=""
check() {
if [ ! -f /etc/sysconfig/kdump ] || [ ! -f /lib/kdump/kdump-lib.sh ]\
|| [ -n "${IN_KDUMP}" ]
then
return 1
fi
return 255
}
depends() {
echo "base shutdown"
return 0
}
prepare_kernel_initrd() {
. /lib/kdump/kdump-lib.sh
prepare_kdump_bootinfo
# $kernel is a variable from dracut
if [ "$KDUMP_KERNELVER" != $kernel ]; then
dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \
"but the initramfs is generated for kernel version '$kernel'"
fi
}
install() {
prepare_kernel_initrd
if [ ! -f "$KDUMP_KERNEL" ]; then
derror "Could not find required kernel for earlykdump," \
"earlykdump will not work!"
return 1
fi
if [ ! -f "$KDUMP_INITRD" ]; then
derror "Could not find required kdump initramfs for earlykdump," \
"please ensure kdump initramfs is generated first," \
"earlykdump will not work!"
return 1
fi
inst_multiple tail find cut dirname hexdump
inst_simple "/etc/sysconfig/kdump"
inst_binary "/usr/sbin/kexec"
inst_binary "/usr/bin/gawk" "/usr/bin/awk"
inst_binary "/usr/bin/logger" "/usr/bin/logger"
inst_binary "/usr/bin/printf" "/usr/bin/printf"
inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst_script "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
inst_hook cmdline 00 "$moddir/early-kdump.sh"
inst_binary "$KDUMP_KERNEL"
inst_binary "$KDUMP_INITRD"
ln_r "$KDUMP_KERNEL" "/boot/kernel-earlykdump"
ln_r "$KDUMP_INITRD" "/boot/initramfs-earlykdump"
chmod -x "${initdir}/$KDUMP_KERNEL"
}
modules.d/99earlykdump/early-kdump.sh 0000755 00000003572 15262675530 0013610 0 ustar 00 #! /bin/sh
KEXEC=/sbin/kexec
standard_kexec_args="-p"
EARLY_KDUMP_INITRD=""
EARLY_KDUMP_KERNEL=""
EARLY_KDUMP_CMDLINE=""
EARLY_KDUMP_KERNELVER=""
EARLY_KEXEC_ARGS=""
. /etc/sysconfig/kdump
. /lib/dracut-lib.sh
. /lib/kdump-lib.sh
. /lib/kdump-logger.sh
#initiate the kdump logger
dlog_init
if [ $? -ne 0 ]; then
echo "failed to initiate the kdump logger."
exit 1
fi
prepare_parameters()
{
EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
EARLY_KDUMP_KERNEL="/boot/kernel-earlykdump"
EARLY_KDUMP_INITRD="/boot/initramfs-earlykdump"
}
early_kdump_load()
{
check_kdump_feasibility
if [ $? -ne 0 ]; then
return 1
fi
if is_fadump_capable; then
dwarn "WARNING: early kdump doesn't support fadump."
return 1
fi
check_current_kdump_status
if [ $? == 0 ]; then
return 1
fi
prepare_parameters
EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
# Here, only output the messages, but do not save these messages
# to a file because the target disk may not be mounted yet, the
# earlykdump is too early.
ddebug "earlykdump: $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
--command-line=$EARLY_KDUMP_CMDLINE --initrd=$EARLY_KDUMP_INITRD \
$EARLY_KDUMP_KERNEL"
$KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
--command-line="$EARLY_KDUMP_CMDLINE" \
--initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL
if [ $? == 0 ]; then
dinfo "kexec: loaded early-kdump kernel"
return 0
else
derror "kexec: failed to load early-kdump kernel"
return 1
fi
}
set_early_kdump()
{
if getargbool 0 rd.earlykdump; then
dinfo "early-kdump is enabled."
early_kdump_load
else
dinfo "early-kdump is disabled."
fi
return 0
}
set_early_kdump
modules.d/95nbd/module-setup.sh 0000755 00000002000 15262675530 0012344 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _rootdev
# if an nbd device is not somewhere in the chain of devices root is
# mounted on, fail the hostonly check.
[[ $hostonly ]] || [[ $mount_needs ]] && {
is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
_rootdev=$(find_root_block_device)
[[ -b /dev/block/$_rootdev ]] || return 1
check_block_and_slaves is_nbd "$_rootdev" || return 255
}
require_binaries nbd-client || return 1
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network rootfs-block
}
# called by dracut
installkernel() {
instmods nbd
}
# called by dracut
install() {
inst nbd-client
inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
inst_script "$moddir/nbdroot.sh" "/sbin/nbdroot"
if dracut_module_included "systemd-initrd"; then
inst_script "$moddir/nbd-generator.sh" $systemdutildir/system-generators/dracut-nbd-generator
fi
dracut_need_initqueue
}
modules.d/95nbd/nbd-generator.sh 0000755 00000002200 15262675530 0012452 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -z "$root" ] && root=$(getarg root=)
[ "${root%%:*}" = "nbd" ] || exit 0
GENERATOR_DIR="$2"
[ -z "$GENERATOR_DIR" ] && exit 1
[ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR"
ROOTFLAGS="$(getarg rootflags)"
nroot=${root#nbd:}
nbdserver=${nroot%%:*}; nroot=${nroot#*:}
nbdport=${nroot%%:*}; nroot=${nroot#*:}
nbdfstype=${nroot%%:*}; nroot=${nroot#*:}
nbdflags=${nroot%%:*}
if [ "$nbdflags" = "$nbdfstype" ]; then
unset nbdflags
fi
if [ "$nbdfstype" = "$nbdport" ]; then
unset nbdfstype
fi
[ -n "$nbdflags" ] && ROOTFLAGS="$nbdflags"
if getarg "ro"; then
if [ -n "$ROOTFLAGS" ]; then
ROOTFLAGS="$ROOTFLAGS,ro"
else
ROOTFLAGS="ro"
fi
fi
if [ -n "$nbdfstype" ]; then
ROOTFSTYPE="$nbdfstype"
else
ROOTFSTYPE=$(getarg rootfstype=) || unset ROOTFSTYPE
fi
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=/dev/root"
[ -n "$ROOTFSTYPE" ] && echo "Type=${ROOTFSTYPE}"
[ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}"
} > "$GENERATOR_DIR"/sysroot.mount
exit 0
modules.d/95nbd/nbdroot.sh 0000755 00000007264 15262675530 0011411 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3?
[ -z "$3" ] && exit 1
# root is in the form root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
netif="$1"
nroot="$2"
NEWROOT="$3"
# If it's not nbd we don't continue
[ "${nroot%%:*}" = "nbd" ] || return
nroot=${nroot#nbd:}
nbdserver=${nroot%%:*}; nroot=${nroot#*:}
nbdport=${nroot%%:*}; nroot=${nroot#*:}
nbdfstype=${nroot%%:*}; nroot=${nroot#*:}
nbdflags=${nroot%%:*}
nbdopts=${nroot#*:}
if [ "$nbdopts" = "$nbdflags" ]; then
unset nbdopts
fi
if [ "$nbdflags" = "$nbdfstype" ]; then
unset nbdflags
fi
if [ "$nbdfstype" = "$nbdport" ]; then
unset nbdfstype
fi
if [ -z "$nbdfstype" ]; then
nbdfstype=auto
fi
# look through the NBD options and pull out the ones that need to
# go before the host etc. Append a ',' so we know we terminate the loop
nbdopts=${nbdopts},
while [ -n "$nbdopts" ]; do
f=${nbdopts%%,*}
nbdopts=${nbdopts#*,}
if [ -z "$f" ]; then
break
fi
if [ -z "${f%bs=*}" -o -z "${f%timeout=*}" ]; then
preopts="$preopts $f"
continue
fi
opts="$opts $f"
done
# look through the flags and see if any are overridden by the command line
nbdflags=${nbdflags},
while [ -n "$nbdflags" ]; do
f=${nbdflags%%,*}
nbdflags=${nbdflags#*,}
if [ -z "$f" ]; then
break
fi
if [ "$f" = "ro" -o "$f" = "rw" ]; then
nbdrw=$f
continue
fi
fsopts=${fsopts:+$fsopts,}$f
done
getarg ro && nbdrw=ro
getarg rw && nbdrw=rw
fsopts=${fsopts:+$fsopts,}${nbdrw}
# XXX better way to wait for the device to be made?
i=0
while [ ! -b /dev/nbd0 ]; do
[ $i -ge 20 ] && exit 1
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=/dev/nbd0
else
sleep 0.1
fi
i=$(($i + 1))
done
# If we didn't get a root= on the command line, then we need to
# add the udev rules for mounting the nbd0 device
if [ "$root" = "block:/dev/root" -o "$root" = "dhcp" ]; then
printf 'KERNEL=="nbd0", ENV{DEVTYPE}!="partition", ENV{ID_FS_TYPE}=="?*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-nbd-root.rules
udevadm control --reload
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
write_fs_tab /dev/root "$nbdfstype" "$fsopts"
wait_for_dev -n /dev/root
if [ -z "$DRACUT_SYSTEMD" ]; then
printf '/bin/mount %s\n' \
"$NEWROOT" \
> $hookdir/mount/01-$$-nbd.sh
fi
fi
if strstr "$(nbd-client --help 2>&1)" "systemd-mark"; then
preopts="--systemd-mark $preopts"
fi
if [ "$nbdport" -gt 0 ] 2>/dev/null; then
if [ -z "$DRACUT_SYSTEMD" ]; then
nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts || exit 1
else
systemd-run --no-block --service-type=forking --quiet \
--description="nbd nbd0" \
-p 'DefaultDependencies=no' \
-p 'KillMode=none' \
--unit="nbd0" -- nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1
fi
else
if [ -z "$DRACUT_SYSTEMD" ]; then
nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts || exit 1
else
systemd-run --no-block --service-type=forking --quiet \
--description="nbd nbd0" \
-p 'DefaultDependencies=no' \
-p 'KillMode=none' \
--unit="nbd0" -- nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1
fi
fi
# NBD doesn't emit uevents when it gets connected, so kick it
echo change > /sys/block/nbd0/uevent
udevadm settle
need_shutdown
exit 0
modules.d/95nbd/parse-nbdroot.sh 0000755 00000003334 15262675530 0012513 0 ustar 00 #!/bin/sh
#
# Preferred format:
# root=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]]
# [root=*] netroot=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]]
#
# nbdopts is a comma separated list of options to give to nbd-client
#
# root= takes precedence over netroot= if root=nbd[...]
#
# Sadly there's no easy way to split ':' separated lines into variables
netroot_to_var() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset server port
server=$2; port=$3;
}
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "nbd" ] && break
done
[ "${netroot%%:*}" = "nbd" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "nbd" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not nbd we don't continue
[ "${netroot%%:*}" = "nbd" ] || return
if [ -n "${DRACUT_SYSTEMD}" ] && [ "$root" = "dhcp" ]; then
echo "root=$netroot" > /etc/cmdline.d/root.conf
systemctl --no-block daemon-reload
fi
# Check required arguments
netroot_to_var $netroot
[ -z "$server" ] && die "Argument server for nbdroot is missing"
[ -z "$port" ] && die "Argument port for nbdroot is missing"
# NBD actually supported?
incol2 /proc/devices nbd || modprobe nbd || die "nbdroot requested but kernel/initrd does not support nbd"
# Done, all good!
rootok=1
# Shut up init error check
if [ -z "$root" ]; then
root=block:/dev/root
wait_for_dev -n /dev/root
fi
modules.d/40network/module-setup.sh 0000755 00000001240 15262675530 0013265 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo -n "kernel-network-modules "
if ! dracut_module_included "network-legacy" && [ -x "/usr/libexec/nm-initrd-generator" ] ; then
echo "network-manager"
else
echo "network-legacy"
fi
return 0
}
# called by dracut
installkernel() {
return 0
}
# called by dracut
install() {
local _arch _i _dir
inst_script "$moddir/netroot.sh" "/sbin/netroot"
inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
inst_hook cmdline 91 "$moddir/dhcp-root.sh"
dracut_need_initqueue
}
modules.d/40network/netroot.sh 0000755 00000005165 15262675530 0012346 0 ustar 00 #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v setup_net >/dev/null || . /lib/net-lib.sh
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# [ ! -z $2 ] means this is for manually bringing up network
# instead of real netroot; If It's called without $2, then there's
# no sense in doing something if no (net)root info is available
# or root is already there
[ -d $NEWROOT/proc ] && exit 0
if [ -z "$netroot" ]; then
netroot=$(getarg netroot=)
fi
[ -z "$netroot" ] && exit 1
# Set or override primary interface
netif=$1
[ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
case "$netif" in
??:??:??:??:??:??) # MAC address
for i in /sys/class/net/*/address; do
mac=$(cat $i)
if [ "$mac" = "$netif" ]; then
i=${i%/address}
netif=${i##*/}
break
fi
done
esac
# Figure out the handler for root=dhcp by recalling all netroot cmdline
# handlers when this is not called from manually network bringing up.
if [ -z "$2" ]; then
if getarg "root=dhcp" || getarg "netroot=dhcp" || getarg "root=dhcp6" || getarg "netroot=dhcp6"; then
# Load dhcp options
[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
# If we have a specific bootdev with no dhcpoptions or empty root-path,
# we die. Otherwise we just warn
if [ -z "$new_root_path" ] ; then
[ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
warn "No dhcp root-path received for '$netif' trying other interfaces if available"
exit 1
fi
rm -f -- $hookdir/initqueue/finished/dhcp.sh
# Set netroot to new_root_path, so cmdline parsers don't call
netroot=$new_root_path
# FIXME!
unset rootok
for f in $hookdir/cmdline/90*.sh; do
[ -f "$f" ] && . "$f";
done
else
rootok="1"
fi
# Check: do we really know how to handle (net)root?
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
handler=${netroot%%:*}
handler=${handler%%4}
handler=$(command -v ${handler}root)
if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then
die "No handler for netroot type '$netroot'"
fi
fi
# Source netroot hooks before we start the handler
source_hook netroot $netif
# Run the handler; don't store the root, it may change from device to device
# XXX other variables to export?
[ -n "$handler" ] && "$handler" "$netif" "$netroot" "$NEWROOT"
save_netinfo $netif
exit 0
modules.d/40network/dhcp-root.sh 0000755 00000001460 15262675530 0012545 0 ustar 00 #!/bin/sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "$netroot" = "dhcp" ] && break
[ "$netroot" = "dhcp6" ] && break
done
[ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
fi
if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
# Tell ip= checker that we need dhcp
NEEDDHCP="1"
# Done, all good!
rootok=1
if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
netroot=$root
fi
# Shut up init error check
[ -z "$root" ] && root="dhcp"
echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue/finished/dhcp.sh
fi
modules.d/40network/ifname-genrules.sh 0000755 00000002137 15262675530 0013731 0 ustar 00 #!/bin/sh
# if there are no ifname parameters, just use NAME=KERNEL
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
{
for p in $(getargs ifname=); do
parse_ifname_opts $p
if [ -f /tmp/ifname-$ifname_mac ]; then
read oldif < /tmp/ifname-$ifname_mac
fi
if [ -f /tmp/ifname-$ifname_if ]; then
read oldmac < /tmp/ifname-$ifname_if
fi
if [ -n "$oldif" -a -n "$oldmac" -a "$oldif" = "$ifname_if" -a "$oldmac" = "$ifname_mac" ]; then
# skip same ifname= declaration
continue
fi
[ -n "$oldif" ] && warn "Multiple interface names specified for MAC $ifname_mac: $oldif"
[ -n "$oldmac" ] && warn "Multiple MAC specified for $ifname_if: $oldmac"
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
echo $ifname_if > /tmp/ifname-$ifname_mac
echo $ifname_mac > /tmp/ifname-$ifname_if
done
} >> /etc/udev/rules.d/80-ifname.rules
modules.d/40network/net-lib.sh 0000755 00000062527 15262675530 0012213 0 ustar 00 #!/bin/sh
is_ip() {
echo "$1" | {
IFS=. read a b c d
test "$a" -ge 0 -a "$a" -le 255 \
-a "$b" -ge 0 -a "$b" -le 255 \
-a "$c" -ge 0 -a "$c" -le 255 \
-a "$d" -ge 0 -a "$d" -le 255 \
2> /dev/null
} && return 0
return 1
}
get_ip() {
local iface="$1" ip=""
ip=$(ip -o -f inet addr show $iface)
ip=${ip%%/*}
ip=${ip##* }
echo $ip
}
iface_for_remote_addr() {
set -- $(ip -o route get to $1)
echo $5
}
iface_for_ip() {
set -- $(ip -o addr show to $1)
echo $2
}
iface_for_mac() {
local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
for interface in /sys/class/net/*; do
if [ $(cat $interface/address) = "$mac" ]; then
echo ${interface##*/}
fi
done
}
# get the iface name for the given identifier - either a MAC, IP, or iface name
iface_name() {
case $1 in
??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
*:*:*|*.*.*.*) iface_for_ip $1 ;;
*) echo $1 ;;
esac
}
# list the configured interfaces
configured_ifaces() {
local IFACES="" iface_id="" rv=1
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
for iface_id in $IFACES; do
echo $(iface_name $iface_id)
rv=0
done
else
warn "configured_ifaces called before udev is running"
echo $IFACES
[ -n "$IFACES" ] && rv=0
fi
return $rv
}
all_ifaces_up() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.up ] || return 1
done
}
all_ifaces_setup() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.did-setup ] || return 1
done
}
get_netroot_ip() {
local prefix="" server="" rest=""
splitsep "$1" ":" prefix server rest
case $server in
[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;;
esac
return 1
}
ip_is_local() {
strstr "$(ip route get $1 2>/dev/null)" " via "
}
ifdown() {
local netif="$1"
# ip down/flush ensures that routing info goes away as well
ip link set $netif down
ip addr flush dev $netif
echo "#empty" > /etc/resolv.conf
rm -f -- /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
# TODO: send "offline" uevent?
}
setup_net() {
local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
local _p
[ -e /tmp/net.$netif.did-setup ] && return
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
[ -z "$IFACES" ] && IFACES="$netif"
# run the scripts written by ifup
if [ -e /tmp/net."$netif".hostname ]; then
if grep -qE '[$`;&|(]' /tmp/net."$netif".hostname 2>/dev/null; then
warn "setup_net $netif: /tmp/net.$netif.hostname contains suspicious shell metacharacters"
fi
# shellcheck disable=SC1090
. /tmp/net."$netif".hostname
fi
[ -e /tmp/net."$netif".override ] && . /tmp/net."$netif".override
[ -e /tmp/dhclient."$netif".dhcpopts ] && . /tmp/dhclient."$netif".dhcpopts
# set up resolv.conf
[ -e /tmp/net.$netif.resolv.conf ] && \
awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf
[ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw
# add static route
for _p in $(getargs rd.route); do
route_to_var "$_p" || continue
[ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
if strstr "$route_mask" ":"; then
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route6."$netif"
else
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route."$netif"
fi
done
# If a static route was necessary to reach the gateway, the
# first gateway setup call will have failed with
# RTNETLINK answers: Network is unreachable
# Replace the default route again after static routes to cover
# this scenario.
[ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw
# Handle STP Timeout: arping the default gateway.
# (or the root server, if a) it's local or b) there's no gateway.)
# Note: This assumes that if no router is present the
# root server is on the same subnet.
# Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
[ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
[ -n "$gw" ] && gw_ip=$gw
# Get the "netroot" IP (if there's an IP address in there)
netroot_ip=$(get_netroot_ip $netroot)
# try netroot if it's local (or there's no gateway)
if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then
dest="$netroot_ip"
else
dest="$gw_ip"
fi
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
if command -v arping2 >/dev/null; then
arping2 -q -C 1 -c 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
else
arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
fi
fi
unset layer2
> /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
> /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
}
save_netinfo() {
local netif="$1" IFACES="" f="" i=""
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
# Add $netif to the front of IFACES (if it's not there already).
set -- "$netif"
for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
IFACES="$*"
for i in $IFACES; do
for f in /tmp/dhclient.$i.*; do
[ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.}
done
done
echo $IFACES > /tmp/.net.ifaces.new
mv /tmp/.net.ifaces.new /tmp/net.ifaces
}
set_ifname() {
local name="$1" mac="$2" num=-1 n=""
# if it's already set, return the existing name
for n in $(getargs ifname=); do
strstr "$n" "$mac" && echo ${n%%:*} && return
done
# otherwise, pick a new name and use that
while :; do
num=$(($num+1));
[ -e /sys/class/net/$name$num ] && continue
for n in $(getargs ifname=); do
[ "$name$num" = "${n%%:*}" ] && continue 2
done
break
done
echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
echo "$name$num"
}
# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
local macaddr=${1}
local IFS='-'
macaddr=$(printf '%s:' ${macaddr})
macaddr=${macaddr%:}
# strip hardware type field from pxelinux
[ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
# return macaddr with lowercase alpha characters expected by udev
echo $macaddr | sed 'y/ABCDEF/abcdef/'
}
ibft_to_cmdline() {
local iface=""
modprobe -q iscsi_ibft
(
for iface in /sys/firmware/ibft/ethernet*; do
local mac="" dev=""
local dhcp="" ip="" gw="" mask="" hostname=""
local dns1 dns2
[ -e ${iface}/mac ] || continue
mac=$(read a < ${iface}/mac; echo $a)
[ -z "$mac" ] && continue
dev=$(set_ifname ibft $mac)
[ -e /tmp/net.${dev}.has_ibft_config ] && continue
[ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a)
# Skip invalid interfaces
(( $flags & 1 )) || continue
# Skip interfaces not used for booting unless using multipath
if ! getargbool 0 rd.iscsi.mp ; then
(( $flags & 2 )) || continue
fi
[ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
[ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a)
[ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
if [ -n "$ip" ] ; then
case "$ip" in
*.*.*.*)
family=ipv4
;;
*:*)
family=ipv6
;;
esac
fi
if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then
if [ "$family" = "ipv6" ] ; then
echo "ip=$dev:dhcp6"
else
echo "ip=$dev:dhcp"
fi
elif [ -e ${iface}/ip-addr ]; then
# skip not assigned ip adresses
[ "$ip" = "0.0.0.0" ] && continue
[ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
[ "$gateway" = "0.0.0.0" ] && unset $gateway
[ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
[ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a)
[ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
[ "$dns1" = "0.0.0.0" ] && unset $dns1
[ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
[ "$dns2" = "0.0.0.0" ] && unset $dns2
[ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
if [ "$family" = "ipv6" ] ; then
if [ -n "$ip" ] ; then
ip="[$ip]"
[ -n "$prefix" ] || prefix=64
ip="[${ip}/${prefix}]"
mask=
fi
if [ -n "$gw" ] ; then
gw="[${gw}]"
fi
fi
if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then
echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
else
warn "${iface} does not contain a valid iBFT configuration"
warn "ip-addr=$ip"
warn "gateway=$gw"
warn "subnet-mask=$mask"
warn "hostname=$hostname"
fi
else
info "${iface} does not contain a valid iBFT configuration"
ls -l ${iface} | vinfo
fi
if [ -e ${iface}/vlan ]; then
vlan=$(read a < ${iface}/vlan; echo $a)
if [ "$vlan" -ne "0" ]; then
case "$vlan" in
[0-9]*)
echo "vlan=$dev.$vlan:$dev"
echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
;;
*)
echo "vlan=$vlan:$dev"
echo $mac > /tmp/net.${vlan}.has_ibft_config
;;
esac
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
done
) >> /etc/cmdline.d/40-ibft.conf
}
parse_iscsi_root()
{
local v
v=${1#iscsi:}
# extract authentication info
case "$v" in
*@*:*:*:*:*)
authinfo=${v%%@*}
v=${v#*@}
# allow empty authinfo to allow having an @ in iscsi_target_name like this:
# netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
if [ -n "$authinfo" ]; then
OLDIFS="$IFS"
IFS=:
set $authinfo
IFS="$OLDIFS"
if [ $# -gt 4 ]; then
warn "Wrong authentication info in iscsi: parameter!"
return 1
fi
iscsi_username=$1
iscsi_password=$2
if [ $# -gt 2 ]; then
iscsi_in_username=$3
iscsi_in_password=$4
fi
fi
;;
esac
# extract target ip
case "$v" in
[[]*[]]:*)
iscsi_target_ip=${v#[[]}
iscsi_target_ip=${iscsi_target_ip%%[]]*}
v=${v#[[]$iscsi_target_ip[]]:}
;;
*)
iscsi_target_ip=${v%%[:]*}
v=${v#$iscsi_target_ip:}
;;
esac
unset iscsi_target_name
# extract target name
case "$v" in
*:iqn.*)
iscsi_target_name=iqn.${v##*:iqn.}
v=${v%:iqn.*}:
;;
*:eui.*)
iscsi_target_name=eui.${v##*:eui.}
v=${v%:eui.*}:
;;
*:naa.*)
iscsi_target_name=naa.${v##*:naa.}
v=${v%:naa.*}:
;;
esac
# parse the rest
OLDIFS="$IFS"
IFS=:
set $v
IFS="$OLDIFS"
iscsi_protocol=$1; shift # ignored
iscsi_target_port=$1; shift
if [ -n "$iscsi_target_name" ]; then
if [ $# -eq 3 ]; then
iscsi_iface_name=$1; shift
fi
if [ $# -eq 2 ]; then
iscsi_netdev_name=$1; shift
fi
iscsi_lun=$1; shift
if [ $# -ne 0 ]; then
warn "Invalid parameter in iscsi: parameter!"
return 1
fi
return 0
fi
if [ $# -gt 3 ] && [ -n "$1$2" ]; then
if [ -z "$3" ] || [ "$3" -ge 0 ] 2>/dev/null ; then
iscsi_iface_name=$1; shift
iscsi_netdev_name=$1; shift
fi
fi
iscsi_lun=$1; shift
iscsi_target_name=$(printf "%s:" "$@")
iscsi_target_name=${iscsi_target_name%:}
}
ip_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
if [ $# -eq 0 ]; then
autoconf="error"
return 0
fi
if [ $# -eq 1 ]; then
# format: ip={dhcp|on|any|dhcp6|auto6|either6}
# or
# ip= means anaconda-style static config argument cluster
autoconf="$1"
if strglob "$autoconf" "*.*.*.*"; then
# ip= means anaconda-style static config argument cluster:
# ip= gateway= netmask= hostname= mtu=
# ksdevice={link|bootif|ibft||}
ip="$autoconf"
gw=$(getarg gateway=)
mask=$(getarg netmask=)
hostname=$(getarg hostname=)
dev=$(getarg ksdevice=)
autoconf="none"
mtu=$(getarg mtu=)
# handle special values for ksdevice
case "$dev" in
bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
link) dev="" ;; # FIXME: do something useful with this
ibft) dev="" ;; # ignore - ibft is handled elsewhere
esac
fi
return 0
fi
if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then
# format: ip=:{dhcp|on|any|dhcp6|auto6}[:[][:]]
[ -n "$1" ] && dev="$1"
[ -n "$2" ] && autoconf="$2"
[ -n "$3" ] && mtu=$3
if [ -z "$5" ]; then
macaddr="$4"
else
macaddr="${4}:${5}:${6}:${7}:${8}:${9}"
fi
return 0
fi
# format: ip=:[]:::::{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[][:]]
[ -n "$1" ] && ip=$1
[ -n "$2" ] && srv=$2
[ -n "$3" ] && gw=$3
[ -n "$4" ] && mask=$4
[ -n "$5" ] && hostname=$5
[ -n "$6" ] && dev=$6
[ -n "$7" ] && autoconf=$7
case "$8" in
[0-9a-fA-F]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
dns1="$8"
[ -n "$9" ] && dns2="$9"
;;
[0-9]*)
mtu="$8"
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
*)
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
esac
return 0
}
route_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset route_mask route_gw route_dev
case $# in
2) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
return 0;;
3) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
return 0;;
*) return 1;;
esac
}
parse_ifname_opts() {
local IFS=:
set $1
case $# in
7)
ifname_if=$1
# udev requires MAC addresses to be lower case
ifname_mac=$(echo $2:$3:$4:$5:$6:$7 | sed 'y/ABCDEF/abcdef/')
;;
21)
ifname_if=$1
# udev requires MAC addresses to be lower case
ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21} | sed 'y/ABCDEF/abcdef/')
;;
*)
die "Invalid arguments for ifname="
;;
esac
case $ifname_if in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]|eth[0-9][0-9][0-9][0-9])
warn "ifname=$ifname_if uses the kernel name space for interfaces"
warn "This can fail for multiple network interfaces and is discouraged!"
warn "Please use a custom name like \"netboot\" or \"bluesocket\""
warn "or use biosdevname and no ifname= at all."
;;
esac
}
# some network driver need long time to initialize, wait before it's ready.
wait_for_if_link() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.iflink=)"
timeout=${timeout:-60}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show dev $1 2>/dev/null)
[ -n "$li" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_if_up() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.ifup=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show up dev $1)
if [ -n "$li" ]; then
case "$li" in
*\*)
return 0;;
*\<*,UP,*\>*)
return 0;;
esac
fi
if strstr "$li" "LOWER_UP" \
&& strstr "$li" "state UNKNOWN" \
&& ! strstr "$li" "DORMANT"; then
return 0
fi
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_route_ok() {
local cnt=0
local timeout="$(getargs rd.net.timeout.route=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip route show)
[ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad_link() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1" scope link)" ] \
&& [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1")" ] \
&& [ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_auto() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6auto=)"
timeout=${timeout:-40}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
&& return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
linkup() {
wait_for_if_link $1 2>/dev/null\
&& ip link set $1 up 2>/dev/null\
&& wait_for_if_up $1 2>/dev/null
}
type hostname >/dev/null 2>&1 || \
hostname() {
cat /proc/sys/kernel/hostname
}
iface_has_carrier() {
local cnt=0
local interface="$1" flags=""
[ -n "$interface" ] || return 2
interface="/sys/class/net/$interface"
[ -d "$interface" ] || return 2
local timeout="$(getargs rd.net.timeout.carrier=)"
timeout=${timeout:-10}
timeout=$(($timeout*10))
linkup "$1"
li=$(ip -o link show up dev $1)
strstr "$li" "NO-CARRIER" && _no_carrier_flag=1
while [ $cnt -lt $timeout ]; do
if [ -n "$_no_carrier_flag" ]; then
li=$(ip -o link show up dev $1)
# NO-CARRIER flag was cleared
strstr "$li" "NO-CARRIER" || return 0
elif ! [ -e "$interface/carrier" ]; then
# sysfs not available and "NO-CARRIER" not displayed
return 0
fi
# double check the syscfs carrier flag
[ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
iface_has_link() {
iface_has_carrier "$@"
}
iface_is_enslaved() {
local _li
_li=$(ip -o link show dev $1)
strstr "$_li" " master " || return 1
return 0
}
find_iface_with_link() {
local iface_path="" iface=""
for iface_path in /sys/class/net/*; do
iface=${iface_path##*/}
str_starts "$iface" "lo" && continue
if iface_has_link $iface; then
echo "$iface"
return 0
fi
done
return 1
}
is_persistent_ethernet_name() {
local _netif="$1"
local _name_assign_type="0"
[ -f "/sys/class/net/$_netif/name_assign_type" ] \
&& _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
# NET_NAME_ENUM 1
[ "$_name_assign_type" = "1" ] && return 1
# NET_NAME_PREDICTABLE 2
[ "$_name_assign_type" = "2" ] && return 0
case "$_netif" in
# udev persistent interface names
eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
;;
ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
;;
enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
;;
enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
;;
# biosdevname
em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
;;
p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
;;
*)
return 1
esac
return 0
}
is_kernel_ethernet_name() {
local _netif="$1"
local _name_assign_type="1"
if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
_name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
case "$_name_assign_type" in
2|3|4)
# NET_NAME_PREDICTABLE 2
# NET_NAME_USER 3
# NET_NAME_RENAMED 4
return 1
;;
1|*)
# NET_NAME_ENUM 1
return 0
;;
esac
fi
# fallback to error prone manual name check
case "$_netif" in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
return 0
;;
*)
return 1
esac
}
iface_get_subchannels() {
local _netif
local _subchannels
_netif="$1"
_subchannels=$({
for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
[ -e $i ] || continue
channel=$(readlink -f $i)
printf -- "%s" "${channel##*/},"
done
})
[ -n "$_subchannels" ] || return 1
printf -- "%s" ${_subchannels%,}
}
modules.d/90kernel-modules-extra/module-setup.sh 0000755 00000011755 15262675530 0015664 0 ustar 00 #!/bin/bash
# called by dracut
#
# Parses depmod configuration and calls instmods for out-of-tree kernel
# modules found. Specifically, kernel modules inside directories that
# come from the following places are included (if these kernel modules
# are present in modules.dep):
# - "search" configuration option;
# - "override" configuration option (matching an exact file name constructed
# by concatenating the provided directory and the kernel module name);
# - "external" configuration option (if "external" is a part of "search"
# configuration).
# (See depmod.d(5) for details.)
#
# This module has the following variables available for configuration:
# - "depmod_modules_dep" - Path to the modules.dep file
# ("$srcmods/modules.dep" by default);
# - "depmod_module_dir" - Directory containing kernel modules ("$srcmods"
# by default);
# - "depmod_configs" - array of depmod configuration paths to parse
# (as supplied to depmod -C, ("/run/depmod.d/"
# "/etc/depmod.d/" "/lib/depmod.d/") by default).
installkernel()
{
: "${depmod_modules_dep:=$srcmods/modules.dep}"
: "${depmod_module_dir:=$srcmods}"
[[ -f "${depmod_modules_dep}" ]] || return 0
# Message printers with custom prefix
local mod_name="kernel-modules-extra"
prinfo() { dinfo " ${mod_name}: $*"; }
prdebug() { ddebug " ${mod_name}: $*"; }
# Escape a string for usage as a part of extended regular expression.
# $1 - string to escape
re_escape() {
printf "%s" "$1" | sed 's/\([.+?^$\/\\|()\[]\|\]\)/\\\0/'
}
local OLDIFS
local cfg
local cfgs=()
local search_list=""
local overrides=()
local external_dirs=()
local e f
## Gathering and sorting configuration file list
[ -n "${depmod_configs[@]-}" ] \
|| depmod_configs=(/run/depmod.d/ /etc/depmod.d/ /lib/depmod.d/)
for cfg in "${depmod_configs[@]}"; do
[ -e "$cfg" ] || {
prdebug "configuration source \"$cfg\" does not exist"
continue
}
# '/' is used as a separator between configuration name and
# configuration path
if [ -d "$cfg" ]; then
for f in "$cfg/"*; do
[[ -e "$f" && ! -d "$f" ]] || {
prdebug "configuration source" \
"\"$cfg\" is ignored" \
"(directory or doesn't exist)"
continue
}
cfgs+=("$(basename "$f")/$f")
done
else
cfgs+=("$(basename "$cfg")/$cfg")
fi
done
OLDIFS="$IFS"
IFS=$'\n'
LANG=C cfgs=($(printf '%s\n' "${cfgs[@]}" \
| sort -u -k1,1 -t '/' | cut -f 2- -d '/'))
IFS="$OLDIFS"
## Parse configurations
for cfg in "${cfgs[@]}"; do
prdebug "parsing configuration file \"$cfg\""
local k v mod kverpat path
while read -r k v; do
case "$k" in
search)
search_list="$search_list $v"
prdebug "$cfg: added \"$v\" to the list of" \
"search directories"
;;
override) # module_name kver_pattern dir
read -r mod kverpat path <<<"$v"
if [[ ! "$mod" || ! "$kverpat" || ! "$path" ]]
then
prinfo "$cfg: ignoring incorrect" \
"override option: \"$k $v\""
continue
fi
if [[ '*' = "$kverpat" \
|| "$kernel" =~ "$kverpat" ]]
then
overrides+=("${path}/${mod}")
prdebug "$cfg: added override" \
"\"${path}/${mod}\""
else
prdebug "$cfg: override \"$v\" is" \
"ignored since \"$kverpat\"" \
"doesn't match \"$kernel\""
fi
;;
external) # kverpat dir
read -r kverpat path <<<"$v"
if [[ ! "$kverpat" || ! "$path" ]]; then
prinfo "$cfg: ignoring incorrect" \
"external option: \"$k $v\""
continue
fi
if [[ '*' = "$kverpat" \
|| "$kernel" =~ "$kverpat" ]]
then
external_dirs+=("$path")
prdebug "$cfg: added external" \
"directory \"$path\""
else
prdebug "$cfg: external directory" \
"\"$path\" is ignored since" \
"\"$kverpat\" doesn't match " \
"\"$kernel\""
fi
;;
'#'*|'') # comments and empty strings
;;
include|make_map_files) # ignored by depmod
;;
*)
prinfo "$cfg: unknown depmod configuration" \
"option \"$k $v\""
;;
esac
done < "$cfg"
done
# "updates built-in" is the default search list
: "${search_list:=updates}"
## Build a list of regular expressions for grepping modules.dep
local pathlist=()
for f in "${overrides[@]}"; do
pathlist+=("^$(re_escape "$f")")
done
for f in $(printf "%s" "$search_list"); do
# Ignoring builtin modules
[ "built-in" != "$f" ] || continue
if [ "external" = "$f" ]; then
for e in "${external_dirs[@]}"; do
pathlist+=("$(re_escape "${e%/}")/[^:]+")
done
fi
pathlist+=("$(re_escape "${f%/}")/[^:]+")
done
## Filter modules.dep, canonicalise the resulting filenames and supply
## them to instmods.
[ 0 -lt "${#pathlist[@]}" ] || return 0
printf "^%s\.ko(\.gz|\.bz2|\.xz)?:\n" "${pathlist[@]}" \
| (LANG=C grep -E -o -f - -- "$depmod_modules_dep" || exit 0) \
| tr -d ':' \
| (cd "$depmod_module_dir" || exit; xargs -r realpath -se --) \
| instmods || return 1
return 0
}
modules.d/95virtfs/module-setup.sh 0000755 00000001712 15262675530 0013127 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "9p" ]] && return 0
done
return 255
}
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
instmods 9p 9pnet_virtio virtio_pci
}
# called by dracut
install() {
inst_hook cmdline 95 "$moddir/parse-virtfs.sh"
inst_hook mount 99 "$moddir/mount-virtfs.sh"
}
modules.d/95virtfs/mount-virtfs.sh 0000755 00000003507 15262675530 0013165 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
filter_rootopts() {
rootopts=$1
# strip ro and rw options
local OLDIFS="$IFS"
IFS=,
set -- $rootopts
IFS="$OLDIFS"
local v
while [ $# -gt 0 ]; do
case $1 in
rw|ro);;
defaults);;
*)
v="$v,${1}";;
esac
shift
done
rootopts=${v#,}
echo $rootopts
}
mount_root() {
local _ret
rootfs="9p"
rflags="trans=virtio,version=9p2000.L"
modprobe 9pnet_virtio
mount -t ${rootfs} -o "$rflags",ro "${root#virtfs:}" "$NEWROOT"
rootopts=
if getargbool 1 rd.fstab -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts rest || [ -n "$dev" ]; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
rootopts=$opts
break
fi
done < "$NEWROOT/etc/fstab"
rootopts=$(filter_rootopts $rootopts)
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them; rflags is guaranteed to not be empty
rflags="${rootopts:+"${rootopts},"}${rflags}"
umount "$NEWROOT"
info "Remounting ${root#virtfs:} with -o ${rflags}"
mount -t ${rootfs} -o "$rflags" "${root#virtfs:}" "$NEWROOT" 2>&1 | vinfo
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
}
if [ -n "$root" -a -z "${root%%virtfs:*}" ]; then
mount_root
fi
:
modules.d/95virtfs/parse-virtfs.sh 0000755 00000000135 15262675530 0013127 0 ustar 00 #!/bin/sh
if [ "${root%%:*}" = "virtfs" ] ; then
modprobe 9pnet_virtio
rootok=1
fi
modules.d/45url-lib/module-setup.sh 0000755 00000005753 15262675530 0013164 0 ustar 00 #!/bin/bash
# module-setup for url-lib
# called by dracut
check() {
require_binaries curl || return 1
return 255
}
# called by dracut
depends() {
echo network
return 0
}
# called by dracut
install() {
local _dir _crt _found _lib _nssckbi _p11roots _p11root _p11item
inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
inst_multiple -o ctorrent
inst_multiple curl
# also install libs for curl https
inst_libdir_file "libnsspem.so*"
inst_libdir_file "libnsssysinit.so*"
inst_libdir_file "libsoftokn3.so*"
inst_libdir_file "libsqlite3.so*"
for _dir in $libdirs; do
[[ -d $_dir ]] || continue
for _lib in $_dir/libcurl.so.*; do
[[ -e $_lib ]] || continue
[[ $_nssckbi ]] || _nssckbi=$(grep -F --binary-files=text -z libnssckbi $_lib)
_crt=$(grep -F --binary-files=text -z .crt $_lib)
[[ $_crt ]] || continue
[[ $_crt == /*/* ]] || continue
if ! inst "$_crt"; then
dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work."
continue
fi
_found=1
done
done
# If we found no cert bundle files referenced in libcurl but we
# *did* find a mention of libnssckbi (checked above), install it.
# If its truly NSS libnssckbi, it includes its own trust bundle,
# but if it's really p11-kit-trust.so, we need to find the dirs
# where it will look for a trust bundle and install them too.
if ! [[ $_found ]] && [[ $_nssckbi ]] ; then
_found=1
inst_libdir_file "libnssckbi.so*" || _found=
for _dir in $libdirs; do
[[ -e $_dir/libnssckbi.so ]] || continue
# this looks for directory-ish strings in the file
for _p11roots in $(grep -o --binary-files=text "/[[:alpha:]][[:print:]]*" $_dir/libnssckbi.so) ; do
# the string can be a :-separated list of dirs
for _p11root in $(echo "$_p11roots" | tr ':' '\n') ; do
# check if it's actually a directory (there are
# several false positives in the results)
[[ -d "$_p11root" ]] || continue
# check if it has some specific subdirs that all
# p11-kit trust dirs have
[[ -d "${_p11root}/anchors" ]] || continue
[[ -d "${_p11root}/blacklist" ]] || continue
# so now we know it's really a p11-kit trust dir;
# install everything in it
for _p11item in $(find "$_p11root") ; do
if ! inst "$_p11item" ; then
dwarn "Couldn't install '$_p11item' from p11-kit trust dir '$_p11root'; HTTPS might not work."
continue
fi
done
done
done
done
fi
[[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle or libnssckbi.so; HTTPS won't work."
}
modules.d/45url-lib/url-lib.sh 0000755 00000011721 15262675530 0012077 0 ustar 00 #!/bin/sh
# url-lib.sh - functions for handling URLs (file fetching etc.)
#
# Authors:
# Will Woods
type mkuniqdir >/dev/null 2>&1 || . /lib/dracut-lib.sh
# fetch_url URL [OUTFILE]
# fetch the given URL to a locally-visible location.
# if OUTFILE is given, the URL will be fetched to that filename,
# overwriting it if present.
# If the URL is something mountable (e.g. nfs://) and no OUTFILE is given,
# the server will be left mounted until pre-pivot.
# the return values are as follows:
# 0: success
# 253: unknown error (file missing)
# 254: unhandled URL scheme / protocol
# 255: bad arguments / unparseable URLs
# other: fetch command failure (whatever curl/mount/etc return)
fetch_url() {
local url="$1" outloc="$2"
local handler="$(get_url_handler $url)"
[ -n "$handler" ] || return 254
[ -n "$url" ] || return 255
"$handler" "$url" "$outloc"
}
# get_url_handler URL
# returns the first HANDLERNAME corresponding to the URL's scheme
get_url_handler() {
local scheme="${1%%:*}" item=""
for item in $url_handler_map; do
[ "$scheme" = "${item%%:*}" ] && echo "${item#*:}" && return 0
done
return 1
}
# add_url_handler HANDLERNAME SCHEME [SCHEME...]
# associate the named handler with the named scheme(s).
add_url_handler() {
local handler="$1"; shift
local schemes="$@" scheme=""
set --
for scheme in $schemes; do
[ "$(get_url_handler $scheme)" = "$handler" ] && continue
set -- "$@" "$scheme:$handler"
done
set -- $@ $url_handler_map # add new items to *front* of list
url_handler_map="$@"
}
### HTTP, HTTPS, FTP #################################################
export CURL_HOME="/run/initramfs/url-lib"
mkdir -p $CURL_HOME
curl_args="--globoff --location --retry 3 --fail --show-error"
getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure"
proxy=$(getarg proxy=)
[ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy"
curl_fetch_url() {
local url="$1" outloc="$2"
echo "$url" > /proc/self/fd/0
if [ -n "$outloc" ]; then
curl $curl_args --output - -- "$url" > "$outloc" || return $?
else
local outdir="$(mkuniqdir /tmp curl_fetch_url)"
( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
outloc="$outdir/$(ls -A $outdir)"
fi
if ! [ -f "$outloc" ]; then
warn "Downloading '$url' failed!"
return 253
fi
if [ -z "$2" ]; then echo "$outloc" ; fi
}
add_url_handler curl_fetch_url http https ftp tftp
set_http_header() {
echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
}
### TORRENT ##########################################################
ctorrent_args="-E 0 -e 0"
ctorrent_fetch_url() {
local url="$1" outloc="$2"
url=${url#*//}
torrent_outloc="$outloc.torrent"
echo "$url" > /proc/self/fd/0
if [ -n "$outloc" ]; then
curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $?
else
local outdir="$(mkuniqdir /tmp torrent_fetch_url)"
( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
torrent_outloc="$outdir/$(ls -A $outdir)"
outloc=${torrent_outloc%.*}
fi
if ! [ -f "$torrent_outloc" ]; then
warn "Downloading '$url' failed!"
return 253
fi
ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2
if ! [ -f "$outloc" ]; then
warn "Torrent download of '$url' failed!"
return 253
fi
if [ -z "$2" ]; then echo "$outloc" ; fi
}
command -v ctorrent >/dev/null \
&& add_url_handler ctorrent_fetch_url torrent
### NFS ##############################################################
[ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
nfs_already_mounted() {
local server="$1" path="$2" localdir="" s="" p=""
cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do
splitsep ":" "$src" s p
p=${p%/}
if [ "$server" = "$s" ]; then
if [ "$path" = "$p" ]; then
echo $mnt
elif str_starts "$path" "$p"; then
echo $mnt/${path#$p/}
fi
fi
done
}
nfs_fetch_url() {
local url="$1" outloc="$2" nfs="" server="" path="" options=""
nfs_to_var "$url" || return 255
local filepath="${path%/*}" filename="${path##*/}" mntdir=""
# skip mount if server:/filepath is already mounted
mntdir=$(nfs_already_mounted "$server" "$filepath")
if [ -z "$mntdir" ]; then
local mntdir="$(mkuniqdir /run nfs_mnt)"
mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir"
# lazy unmount during pre-pivot hook
inst_hook --hook pre-pivot --name 99url-lib-umount-nfs-"$(basename "$mntdir")" umount -l -- "$mntdir"
fi
if [ -z "$outloc" ]; then
outloc="$mntdir/$filename"
else
cp -f -- "$mntdir/$filename" "$outloc" || return $?
fi
[ -f "$outloc" ] || return 253
if [ -z "$2" ]; then echo "$outloc" ; fi
}
command -v nfs_to_var >/dev/null && add_url_handler nfs_fetch_url nfs nfs4
modules.d/95ssh-client/module-setup.sh 0000755 00000004023 15262675530 0013661 0 ustar 00 #!/bin/bash
# fixme: assume user is root
# called by dracut
check() {
[[ $mount_needs ]] && return 1
# If our prerequisites are not met, fail.
require_binaries ssh scp || return 1
if [[ $sshkey ]]; then
[ ! -f $sshkey ] && {
derror "ssh key: $sshkey is not found!"
return 1
}
fi
return 255
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
inst_sshenv()
{
if [ -d /root/.ssh ]; then
inst_dir /root/.ssh
chmod 700 ${initdir}/root/.ssh
fi
# Copy over ssh key and knowhosts if needed
[[ $sshkey ]] && {
inst_simple $sshkey
[[ -f /root/.ssh/known_hosts ]] && inst_simple /root/.ssh/known_hosts
[[ -f /etc/ssh/ssh_known_hosts ]] && inst_simple /etc/ssh/ssh_known_hosts
}
# Copy over root and system-wide ssh configs.
[[ -f /root/.ssh/config ]] && inst_simple /root/.ssh/config
if [[ -f /etc/ssh/ssh_config ]]; then
inst_simple /etc/ssh/ssh_config
sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config
while read key val || [ -n "$key" ]; do
if [[ $key == "GlobalKnownHostsFile" ]]; then
inst_simple "$val"
# Copy customized UserKnowHostsFile
elif [[ $key == "UserKnownHostsFile" ]]; then
# Make sure that ~/foo will be copied as /root/foo in kdump's initramfs
if str_starts "$val" "~/"; then
val="/root/${val#"~/"}"
fi
inst_simple "$val"
fi
done < /etc/ssh/ssh_config
fi
return 0
}
# called by dracut
install() {
local _nsslibs
inst_multiple ssh scp
inst_sshenv
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
}
modules.d/99uefi-lib/module-setup.sh 0000755 00000000324 15262675530 0013310 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo bash
return 0
}
# called by dracut
install() {
inst_simple "$moddir/uefi-lib.sh" "/lib/uefi-lib.sh"
}
modules.d/99uefi-lib/uefi-lib.sh 0000755 00000011205 15262675530 0012361 0 ustar 00 #!/bin/bash
#
# Copyright 2013 Red Hat, Inc. All rights reserved.
# Copyright 2013 Harald Hoyer
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
getbyte () {
local IFS= LC_CTYPE=C res c
read -r -n 1 -d '' c
res=$?
# the single quote in the argument of the printf
# yields the numeric value of $c (ASCII since LC_CTYPE=C)
[[ -n $c ]] && c=$(printf '%u' "'$c") || c=0
printf "$c"
return $res
}
getword () {
local b1 b2 val
b1=$(getbyte) || return 1
b2=$(getbyte) || return 1
(( val = b2 * 256 + b1 ))
echo $val
return 0
}
# Acpi(PNP0A08,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(90E2BA265ED4,0x0)/Vlan(172)/Fibre(0x4EA06104A0CC0050,0x0)
uefi_device_path()
{
local IFS= LC_CTYPE=C res tt len type hextype first
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
if [[ $first == 1 ]]; then
first=0
elif [[ $hextype != "7fff" ]]; then
printf "/"
fi
case $hextype in
0101)
# PCI
tt=$(getword)
printf "PCI(0x%x,0x%x)" $(($tt / 256)) $(($tt & 255))
;;
0201)
# ACPI
printf "Acpi(0x%x,0x%x)" $(($(getword) + $(getword) * 65536)) $(($(getword) + $(getword) * 65536))
;;
0303)
# FIBRE
getword &>/dev/null
getword &>/dev/null
printf "Fibre(0x%x%x%x%x%x%x%x%x,0x%x)" \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(( $(getword) + $(getword) * 65536 + 4294967296 * ( $(getword) + $(getword) * 65536 ) ))
;;
030b)
# MAC
printf "MAC(%02x%02x%02x%02x%02x%02x," $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 26 tt || return 1
printf "0x%x)" $(getbyte)
;;
0314)
# VLAN
printf "VLAN(%d)" $(getword)
;;
7fff)
# END
printf "\n"
return 0
;;
*)
printf "Unknown(Type:%d SubType:%d len=%d)" "$type" "$subtype" "$len"
read -r -N $(($len-4)) tt || return 1
;;
esac
done
}
get_fcoe_boot_mac()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
030b)
# MAC
printf "%02x:%02x:%02x:%02x:%02x:%02x" $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 27 tt || return 1
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
get_fcoe_boot_vlan()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
0314)
# VLAN
printf "%d" $(getword)
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
modules.d/90dm/module-setup.sh 0000755 00000001755 15262675530 0012214 0 ustar 00 #!/bin/bash
# called by dracut
check() {
require_binaries dmsetup || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
instmods =drivers/md dm_mod dm-cache dm-cache-mq dm-cache-cleaner
}
# called by dracut
install() {
modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
inst_multiple dmsetup
inst_multiple -o dmeventd
inst_libdir_file "libdevmapper-event.so*"
inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
# files, but provides the one below:
inst_rules 64-device-mapper.rules
# debian udev rules
inst_rules 60-persistent-storage-dm.rules 55-dm.rules
inst_rules "$moddir/11-dm.rules"
inst_rules "$moddir/59-persistent-storage-dm.rules"
prepare_udev_rules 59-persistent-storage-dm.rules
inst_hook shutdown 25 "$moddir/dm-shutdown.sh"
}
modules.d/90dm/59-persistent-storage-dm.rules 0000644 00000001235 15262675530 0014772 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION=="add", GOTO="dm_end"
IMPORT{program}="/sbin/dmsetup info -c --nameprefixes --unquoted --rows --noheadings -o name,uuid,suspended,readonly,major,minor,open,tables_loaded,names_using_dev -j%M -m%m"
ENV{DM_NAME}!="?*", GOTO="dm_end"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_end"
ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_end"
IMPORT BLKID
LABEL="dm_end"
modules.d/90dm/dm-pre-udev.sh 0000755 00000000146 15262675530 0011707 0 ustar 00 #!/bin/sh
strstr "$(cat /proc/misc)" device-mapper || modprobe dm_mod
modprobe dm_mirror 2>/dev/null
modules.d/90dm/dm-shutdown.sh 0000755 00000002325 15262675530 0012034 0 ustar 00 #!/bin/sh
_remove_dm() {
local dev=$1
local s
local devname
for s in /sys/block/${dev}/holders/dm-* ; do
[ -e ${s} ] || continue
_remove_dm ${s##*/}
done
# multipath devices might have MD devices on top,
# which are removed after this script. So do not
# remove those to avoid spurious errors
case $(cat /sys/block/${dev}/dm/uuid) in
mpath-*)
return 0
;;
*)
devname=$(cat /sys/block/${dev}/dm/name)
dmsetup -v --noudevsync remove "$devname" || return $?
;;
esac
return 0
}
_do_dm_shutdown() {
local ret=0
local final=$1
local dev
info "Disassembling device-mapper devices"
for dev in /sys/block/dm-* ; do
[ -e ${dev} ] || continue
if [ "x$final" != "x" ]; then
_remove_dm ${dev##*/} || ret=$?
else
_remove_dm ${dev##*/} >/dev/null 2>&1 || ret=$?
fi
done
if [ "x$final" != "x" ]; then
info "dmsetup ls --tree"
dmsetup ls --tree 2>&1 | vinfo
fi
return $ret
}
if command -v dmsetup >/dev/null &&
[ "x$(dmsetup status)" != "xNo devices found" ]; then
_do_dm_shutdown $1
else
:
fi
modules.d/90dm/11-dm.rules 0000644 00000000216 15262675530 0011114 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
OPTIONS+="db_persist"
LABEL="dm_end"
modules.d/05busybox/module-setup.sh 0000755 00000001072 15262675530 0013273 0 ustar 00 #!/bin/bash
# called by dracut
check() {
require_binaries busybox || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
local _i _path _busybox
local _progs=()
_busybox=$(find_binary busybox)
inst $_busybox /usr/bin/busybox
for _i in $($_busybox --list); do
[[ ${_i} == busybox ]] && continue
_progs+=("${_i}")
done
for _i in "${_progs[@]}"; do
_path=$(find_binary "$_i")
[ -z "$_path" ] && continue
ln_r /usr/bin/busybox $_path
done
}
modules.d/95rootfs-block/module-setup.sh 0000755 00000004374 15262675530 0014225 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo fs-lib
}
cmdline_journal() {
if [[ $hostonly ]]; then
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
rootopts=$(find_dev_fsopts "$dev")
if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
journaldev=$(fs_get_option $rootopts "jdev")
elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
journaldev=$(fs_get_option $rootopts "logdev")
fi
if [ -n "$journaldev" ]; then
printf " root.journaldev=%s" "$journaldev"
fi
done
fi
return 0
}
cmdline_rootfs() {
local _dev=/dev/block/$(find_root_block_device)
local _fstype _flags _subvol
# "--no-hostonly-default-device" can result in empty root_devs
if [ "${#root_devs[@]}" -eq 0 ]; then
return
fi
if [ -e $_dev ]; then
printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$_dev")")"
_fstype="$(find_mp_fstype /)"
_flags="$(find_mp_fsopts /)"
printf " rootfstype=%s" "$_fstype"
if [[ $use_fstab != yes ]] && [[ $_fstype = btrfs ]]; then
_subvol=$(findmnt -e -v -n -o FSROOT --target /) \
&& _subvol=${_subvol#/}
_flags="$_flags,${_subvol:+subvol=$_subvol}"
fi
printf " rootflags=%s" "${_flags#,}"
fi
}
# called by dracut
cmdline() {
cmdline_rootfs
cmdline_journal
}
# called by dracut
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
local _journaldev=$(cmdline_journal)
[[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
local _rootdev=$(cmdline_rootfs)
[[ $_rootdev ]] && printf "%s\n" "$_rootdev" >> "${initdir}/etc/cmdline.d/95root-dev.conf"
fi
inst_multiple umount
inst_multiple tr
if ! dracut_module_included "systemd"; then
inst_hook cmdline 95 "$moddir/parse-block.sh"
inst_hook pre-udev 30 "$moddir/block-genrules.sh"
inst_hook mount 99 "$moddir/mount-root.sh"
fi
inst_hook initqueue/timeout 99 "$moddir/rootfallback.sh"
}
modules.d/95rootfs-block/block-genrules.sh 0000755 00000000725 15262675530 0014512 0 ustar 00 #!/bin/sh
if [ "${root%%:*}" = "block" ]; then
{
printf 'KERNEL=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
} >> /etc/udev/rules.d/99-root.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \
"${root#block:}" "${root#block:}" > $hookdir/initqueue/settled/blocksymlink.sh
wait_for_dev "${root#block:}"
fi
modules.d/95rootfs-block/rootfallback.sh 0000755 00000002332 15262675530 0014235 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
for root in $(getargs rootfallback=); do
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="/dev/disk/by-label/${root#LABEL=}"
;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-uuid/${root#UUID=}"
;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-partuuid/${root}"
;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="/dev/disk/by-partlabel/${root#PARTLABEL=}"
;;
esac
if ! [ -b "$root" ]; then
warn "Could not find rootfallback $root"
continue
fi
if mount "$root" /sysroot; then
info "Mounted rootfallback $root"
exit 0
else
warn "Failed to mount rootfallback $root"
exit 1
fi
done
[ -e "$job" ] && rm -f "$job"
modules.d/95rootfs-block/mount-root.sh 0000755 00000010506 15262675530 0013717 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
mount_root() {
local _ret
local _rflags_ro
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fstype")
journaldev=$(getarg "root.journaldev=")
if [ -n "$journaldev" ]; then
case "$rootfs" in
xfs)
rflags="${rflags:+${rflags},}logdev=$journaldev"
;;
reiserfs)
fsckoptions="-j $journaldev $fsckoptions"
rflags="${rflags:+${rflags},}jdev=$journaldev"
;;
*);;
esac
fi
_rflags_ro="$rflags,ro"
_rflags_ro="${_rflags_ro##,}"
while ! mount -t ${rootfs} -o "$_rflags_ro" "${root#block:}" "$NEWROOT"; do
warn "Failed to mount -t ${rootfs} -o $_rflags_ro ${root#block:} $NEWROOT"
fsck_ask_err
done
READONLY=
fsckoptions=
if [ -f "$NEWROOT"/etc/sysconfig/readonly-root ]; then
. "$NEWROOT"/etc/sysconfig/readonly-root
fi
if getargbool 0 "readonlyroot=" -y readonlyroot; then
READONLY=yes
fi
if getarg noreadonlyroot ; then
READONLY=no
fi
if [ -f "$NEWROOT"/fastboot ] || getargbool 0 fastboot ; then
fastboot=yes
fi
if ! getargbool 0 rd.skipfsck; then
if [ -f "$NEWROOT"/fsckoptions ]; then
fsckoptions=$(cat "$NEWROOT"/fsckoptions)
fi
if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f "$NEWROOT"/.autofsck ]; then
[ -f "$NEWROOT"/etc/sysconfig/autofsck ] && \
. "$NEWROOT"/etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
warn "*** Warning -- the system did not shut down cleanly. "
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
emergency_shell
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
fi
rootopts=
if getargbool 1 rd.fstab -d -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts dump fsck || [ -n "$dev" ]; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fs")
rootopts=$opts
rootfsck=$fsck
break
fi
done < "$NEWROOT/etc/fstab"
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them
rflags="${rootopts},${rflags}"
rflags="${rflags#,}"
rflags="${rflags%,}"
# backslashes are treated as escape character in fstab
# esc_root=$(echo ${root#block:} | sed 's,\\,\\\\,g')
# printf '%s %s %s %s 1 1 \n' "$esc_root" "$NEWROOT" "$rootfs" "$rflags" >/etc/fstab
ran_fsck=0
if fsck_able "$rootfs" && \
[ "$rootfsck" != "0" -a -z "$fastboot" -a "$READONLY" != "yes" ] && \
! strstr "${rflags}" _netdev && \
! getargbool 0 rd.skipfsck; then
umount "$NEWROOT"
fsck_single "${root#block:}" "$rootfs" "$rflags" "$fsckoptions"
_ret=$?
ran_fsck=1
fi
echo "${root#block:} $NEWROOT $rootfs ${rflags:-defaults} 0 $rootfsck" >> /etc/fstab
if ! ismounted "$NEWROOT"; then
info "Mounting ${root#block:} with -o ${rflags}"
mount "$NEWROOT" 2>&1 | vinfo
elif ! are_lists_eq , "$rflags" "$_rflags_ro" defaults; then
info "Remounting ${root#block:} with -o ${rflags}"
mount -o remount "$NEWROOT" 2>&1 | vinfo
fi
if ! getargbool 0 rd.skipfsck; then
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
fi
}
if [ -n "$root" -a -z "${root%%block:*}" ]; then
mount_root
fi
modules.d/95rootfs-block/parse-block.sh 0000755 00000001634 15262675530 0014000 0 ustar 00 #!/bin/sh
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-partuuid/${root}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
[ "${root%%:*}" = "block" ] && wait_for_dev "${root#block:}"
modules.d/91crypt-gpg/module-setup.sh 0000755 00000002745 15262675530 0013531 0 ustar 00 #!/bin/bash
# GPG support is optional
# called by dracut
check() {
require_binaries gpg || return 1
if sc_requested; then
if ! sc_supported; then
dwarning "crypt-gpg: GnuPG >= 2.1 with scdaemon and libusb required for ccid smartcard support"
return 1
fi
return 0
fi
return 255
}
# called by dracut
depends() {
echo crypt
}
# called by dracut
install() {
inst_multiple gpg
inst "$moddir/crypt-gpg-lib.sh" "/lib/dracut-crypt-gpg-lib.sh"
if sc_requested; then
inst_multiple gpg-agent
inst_multiple gpg-connect-agent
inst_multiple /usr/libexec/scdaemon
cp "$(sc_public_key)" "${initdir}/root/"
fi
}
sc_public_key() {
echo -n "/etc/dracut.conf.d/crypt-public-key.gpg"
}
# CCID Smartcard support requires GnuPG >= 2.1 with scdaemon and libusb
sc_supported() {
local gpgMajor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')"
local gpgMinor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')"
if [[ "${gpgMajor}" -gt 2 || "${gpgMajor}" -eq 2 && "${gpgMinor}" -ge 1 ]] && \
require_binaries gpg-agent &&
require_binaries gpg-connect-agent &&
require_binaries /usr/libexec/scdaemon &&
(ldd /usr/libexec/scdaemon | grep libusb > /dev/null); then
return 0
else
return 1
fi
}
sc_requested() {
if [ -f "$(sc_public_key)" ]; then
return 0
else
return 1
fi
}
modules.d/91crypt-gpg/crypt-gpg-lib.sh 0000755 00000005072 15262675530 0013562 0 ustar 00 #!/bin/sh
command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh
# gpg_decrypt mnt_point keypath keydev device
#
# Decrypts symmetrically encrypted (password or OpenPGP smartcard) key to standard output.
#
# mnt_point - mount point where is already mounted
# keypath - GPG encrypted key path relative to
# keydev - device on which key resides; only to display in prompt
# device - device to be opened by cryptsetup; only to display in prompt
gpg_decrypt() {
local mntp="$1"
local keypath="$2"
local keydev="$3"
local device="$4"
local gpghome=/tmp/gnupg
local opts="--homedir $gpghome --no-mdc-warning --skip-verify --quiet"
opts="$opts --logger-file /dev/null --batch --no-tty --passphrase-fd 0"
mkdir -m 0700 -p "$gpghome"
# Setup GnuPG home and gpg-agent for usage of OpenPGP smartcard.
# This requires GnuPG >= 2.1, as it uses the new ,,pinentry-mode´´
# feature, which - when set to ,,loopback´´ - allows us to pipe
# the smartcard's pin to GnuPG (instead of using a normal pinentry
# program needed with GnuPG < 2.1), making for uncomplicated
# integration with the existing codebase.
local useSmartcard="0"
local gpgMajorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')"
local gpgMinorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')"
if [ "${gpgMajorVersion}" -ge 2 ] && [ "${gpgMinorVersion}" -ge 1 ] \
&& [ -f /root/crypt-public-key.gpg ] && getargbool 1 rd.luks.smartcard ; then
useSmartcard="1"
echo "allow-loopback-pinentry" >> "$gpghome/gpg-agent.conf"
GNUPGHOME="$gpghome" gpg-agent --quiet --daemon
GNUPGHOME="$gpghome" gpg --quiet --no-tty --import < /root/crypt-public-key.gpg
local smartcardSerialNumber="$(GNUPGHOME=$gpghome gpg --no-tty --card-status \
| sed -n -r -e 's|Serial number.*: ([0-9]*)|\1|p' | tr -d '\n')"
if [ -n "${smartcardSerialNumber}" ]; then
inputPrompt="PIN (OpenPGP card ${smartcardSerialNumber})"
fi
GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null learn /bye
opts="$opts --pinentry-mode=loopback"
fi
ask_for_password \
--cmd "gpg $opts --decrypt $mntp/$keypath" \
--prompt "${inputPrompt:-Password ($keypath on $keydev for $device)}" \
--tries 3 --tty-echo-off
# Clean up the smartcard gpg-agent
if [ "${useSmartcard}" == "1" ]; then
GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null killagent /bye
fi
rm -rf -- "$gpghome"
}
modules.d/91crypt-gpg/README 0000644 00000005043 15262675530 0011421 0 ustar 00 # Directions for changing a system from password-based gpg keyfile
# to smartcard-based gpg keyfile
# Be sure that you meet the following requirements:
# 1. GnuPG >= 2.1 installed with
# * Smartcard support enabled (scdaemon must be built)
# * Direct CCID access built into scdaemon
# 2. A password-based gpg keyfile ${KEYFILE} (e.g. "keyfile.gpg"):
# That is, a file containing the slot key for LUKS, which
# has been encrypted symmetrically with GnuPG using
# a password.
# 3. Your public OpenPGP identity ${RECIPIENT} (e.g. "3A696356")
# 4. An OpenPGP smartcard holding the decryption key associated
# with your public identity
# 5. A CCID smartcard reader
# Notes: Requirement 4. and 5. can of course be one device, e.g.
# a USB token with an integrated OpenPGP smartcard
# Make a backup of your keyfile (assuming it lies on the boot partition)
$ cp /boot/${KEYFILE} /safe/place/keyfile.bak.gpg
# Change your keyfile from purely password-based to both
# password-based and key-based (you can then decrypt the keyfile
# with either method). As an example aes256 is chosen, the cipher
# is not important to this guide, but do note that your kernel
# must support it at boot time (be it built into the kernel image
# or loaded as a module from the initramfs).
$ cat /safe/place/keyfile.bak.gpg | gpg -d | gpg --encrypt --recipient ${RECIPIENT} --cipher-algo aes256 --armor -c > /safe/place/keyfile_sc.gpg
# Verify that you can decrypt your new keyfile both with the password
# and your smartcard.
# (with smartcard inserted, you should be prompted for your PIN, unless
# you already did so and have not yet timed out)
$ gpg -d /safe/place/keyfile_sc.gpg
# (with smartcard disconnected, you should be prompted for your password)
$ gpg -d /safe/place/keyfile_sc.gpg
# After verification, replace your old keyfile with your new one
$ su -c 'cp /safe/place/keyfile_sc.gpg /boot/${KEYFILE}'
# Export your public key to where crypt-gpg can find it
$ gpg --armor --export-options export-minimal --export ${RECIPIENT} > /safe/place/crypt-public-key.gpg
$ su -c 'cp /safe/place/crypt-public-key.gpg /etc/dracut.conf.d/crypt-public-key.gpg'
# Rebuild your initramfs as usual
# When booting with any of the requirements not met, crypt-gpg will default to password-based keyfile unlocking.
# If all requirements are met and smartcard support is not disabled by setting the kernel option "rd.luks.smartcard=0"
# crypt-gpg will try find and use a connected OpenPGP smartcard by prompting you for the PIN and then
# unlocking the gpg keyfile with the smartcard.
modules.d/95hwdb/module-setup.sh 0000755 00000001057 15262675530 0012540 0 ustar 00 #!/bin/bash
# This file is part of dracut.
# SPDX-License-Identifier: GPL-2.0-or-later
check() {
return 255
}
# called by dracut
install() {
local hwdb_bin
# systemd-hwdb ships the file in /etc, with /usr/lib as an alternative.
# Therefore consider this location as preferred for configuration.
hwdb_bin="${udevdir}"/hwdb.bin
if [[ ! -r "${hwdb_bin}" ]]; then
hwdb_bin="${udevconfdir}"/hwdb.bin
fi
if [[ $hostonly ]]; then
inst_multiple -H "${hwdb_bin}"
else
inst_multiple "${hwdb_bin}"
fi
}
modules.d/06rngd/module-setup.sh 0000644 00000002454 15262675530 0012535 0 ustar 00 #!/bin/bash
# vim: set tabstop=8 shiftwidth=4 softtabstop=4 expandtab smarttab colorcolumn=80:
#
# Copyright (c) 2019 Red Hat, Inc.
# Author: Renaud Métrich
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
depends() {
echo systemd
return 0
}
check() {
# if there's no rngd binary, no go.
require_binaries rngd || return 1
return 0
}
install() {
inst rngd
inst_simple "${systemdsystemunitdir}/rngd.service"
if [ -r /etc/sysconfig/rngd ]; then
inst_simple "${moddir}/sysconfig" "/etc/sysconfig/rngd"
fi
# make sure dependant libs are installed too
inst_libdir_file opensc-pkcs11.so
systemctl -q --root "$initdir" add-wants sysinit.target rngd.service
}
modules.d/06rngd/sysconfig 0000644 00000000072 15262675530 0011477 0 ustar 00 RNGD_ARGS="--fill-watermark=0 -x pkcs11 -x nist -x qrypt"
modules.d/99memstrack/module-setup.sh 0000755 00000001160 15262675530 0013601 0 ustar 00 #!/usr/bin/bash
check() {
if find_binary memstrack >/dev/null; then
dinfo "memstrack is available"
return 0
fi
dinfo "memstrack is not available"
dinfo "If you need to use rd.memdebug>=4, please install memstrack"
return 1
}
depends() {
return 0
}
install() {
inst "/bin/memstrack" "/bin/memstrack"
inst "$moddir/memstrack-start.sh" "/bin/memstrack-start"
inst_hook cleanup 99 "$moddir/memstrack-report.sh"
inst "$moddir/memstrack.service" "$systemdsystemunitdir/memstrack.service"
systemctl -q --root "$initdir" add-wants initrd.target memstrack.service
}
modules.d/99memstrack/memstrack.service 0000644 00000000502 15262675530 0014166 0 ustar 00 [Unit]
Description=Memstrack Anylazing Service
DefaultDependencies=no
Before=dracut-cmdline.service systemd-udevd.service local-fs-pre.target
IgnoreOnIsolate=true
[Service]
Type=simple
ExecStart=/bin/memstrack-start
PIDFile=/run/memstrack.pid
StandardInput=null
StandardOutput=syslog+console
StandardError=syslog+console
modules.d/99memstrack/memstrack-report.sh 0000755 00000000712 15262675530 0014457 0 ustar 00 #!/usr/bin/bash
. /lib/dracut-lib.sh
if ! [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then
return 0
fi
if type -P systemctl >/dev/null; then
systemctl stop memstrack.service
else
get_pid_of_tracer () {
local _user _pid _rest
read _user _pid _rest <<< $(ps aux | grep [m]emstrack | head -1)
echo $_pid
}
kill -s INT $(get_pid_of_tracer)
while [[ -n $(get_pid_of_tracer) ]]; do
sleep 1
done
fi
cat /.memstrack
modules.d/99memstrack/memstrack-start.sh 0000755 00000003416 15262675530 0014305 0 ustar 00 #!/bin/sh
# Mount kernel debug fs so debug tools can work.
# memdebug=4 and memdebug=5 requires debug fs to be mounted.
# And there is no need to umount it.
type getargnum >/dev/null 2>&1 || . /lib/dracut-lib.sh
# "sys/kernel/tracing" has the priority if exists.
get_trace_base() {
# trace access through debugfs would be obsolete if "/sys/kernel/tracing" is available.
if [ -d "/sys/kernel/tracing" ]; then
echo "/sys/kernel"
else
echo "/sys/kernel/debug"
fi
}
is_debugfs_ready() {
[ -f "$(get_trace_base)/tracing/trace" ]
}
prepare_debugfs() {
local trace_base
trace_base=$(get_trace_base)
# old debugfs interface case.
if ! [ -d "$trace_base/tracing" ]; then
mount none -t debugfs $trace_base
# new tracefs interface case.
elif ! [ -f "$trace_base/tracing/trace" ]; then
mount none -t tracefs "$trace_base/tracing"
fi
if ! [ -f "$trace_base/tracing/trace" ]; then
echo "WARN: failed to mount debugfs"
return 1
fi
}
if ! is_debugfs_ready ; then
prepare_debugfs
fi
if [ -n "$DEBUG_MEM_LEVEL" ]; then
if [ "$DEBUG_MEM_LEVEL" -ge 5 ]; then
echo "memstrack - will report kernel module memory usage summary and top allocation stack"
memstrack --report module_summary,module_top --notui --throttle 80 -o /.memstrack &
elif [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then
echo "memstrack - will report memory usage summary"
memstrack --report module_summary --notui --throttle 80 -o /.memstrack &
else
exit 0;
fi
fi
PID=$!
RET=$?
if [ $RET -ne 0 ]; then
echo "Failed to start memstrack, exit status: $RET"
exit $RET
fi
# Wait a second for memstrack to setup everything, avoid missing any event
sleep 1
echo $PID > /run/memstrack.pid
disown
modules.d/98selinux/selinux-loadpolicy.sh 0000755 00000004302 15262675530 0014503 0 ustar 00 #!/bin/sh
# FIXME: load selinux policy. this should really be done after we switchroot
rd_load_policy()
{
# If SELinux is disabled exit now
getarg "selinux=0" > /dev/null && return 0
SELINUX="enforcing"
[ -e "$NEWROOT/etc/selinux/config" ] && . "$NEWROOT/etc/selinux/config"
# Check whether SELinux is in permissive mode
permissive=0
getarg "enforcing=0" > /dev/null
if [ $? -eq 0 -o "$SELINUX" = "permissive" ]; then
permissive=1
fi
# Attempt to load SELinux Policy
if [ -x "$NEWROOT/usr/sbin/load_policy" -o -x "$NEWROOT/sbin/load_policy" ]; then
local ret=0
local out
info "Loading SELinux policy"
mount -o bind /sys $NEWROOT/sys
# load_policy does mount /proc and /sys/fs/selinux in
# libselinux,selinux_init_load_policy()
if [ -x "$NEWROOT/sbin/load_policy" ]; then
out=$(LANG=C chroot "$NEWROOT" /sbin/load_policy -i 2>&1)
ret=$?
info $out
else
out=$(LANG=C chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1)
ret=$?
info $out
fi
umount $NEWROOT/sys/fs/selinux
umount $NEWROOT/sys
if [ "$SELINUX" = "disabled" ]; then
return 0;
fi
if [ $ret -eq 0 -o $ret -eq 2 ]; then
# If machine requires a relabel, force to permissive mode
[ -e "$NEWROOT"/.autorelabel ] && LANG=C /usr/sbin/setenforce 0
mount --rbind /dev "$NEWROOT/dev"
LANG=C chroot "$NEWROOT" /sbin/restorecon -R /dev
umount -R "$NEWROOT/dev"
return 0
fi
warn "Initial SELinux policy load failed."
if [ $ret -eq 3 -o $permissive -eq 0 ]; then
warn "Machine in enforcing mode."
warn "Not continuing"
emergency_shell -n selinux
exit 1
fi
return 0
elif [ $permissive -eq 0 -a "$SELINUX" != "disabled" ]; then
warn "Machine in enforcing mode and cannot execute load_policy."
warn "To disable selinux, add selinux=0 to the kernel command line."
warn "Not continuing"
emergency_shell -n selinux
exit 1
fi
}
rd_load_policy
modules.d/98selinux/module-setup.sh 0000755 00000000345 15262675530 0013305 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
inst_multiple setenforce
}
modules.d/95nfs/module-setup.sh 0000755 00000010454 15262675530 0012403 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# If our prerequisites are not met, fail anyways.
require_any_binary rpcbind portmap || return 1
require_binaries rpc.statd mount.nfs mount.nfs4 umount || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "nfs" ]] && return 0
[[ "$fs" == "nfs3" ]] && return 0
[[ "$fs" == "nfs4" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
# called by dracut
installkernel() {
hostonly='' instmods =net/sunrpc =fs/nfs ipv6 nfs_acl nfs_layout_nfsv41_files
}
cmdline() {
local nfs_device
local nfs_options
local nfs_root
local nfs_address
local lookup
local ifname
### nfsroot= ###
nfs_device=$(findmnt -t nfs4 -n -o SOURCE /)
if [ -n "$nfs_device" ];then
nfs_root="root=nfs4:$nfs_device"
else
nfs_device=$(findmnt -t nfs -n -o SOURCE /)
[ -z "$nfs_device" ] && return
nfs_root="root=nfs:$nfs_device"
fi
nfs_options=$(findmnt -t nfs4,nfs -n -o OPTIONS /)
[ -n "$nfs_options" ] && nfs_root="$nfs_root:$nfs_options"
echo "$nfs_root"
### ip= ###
if [[ $nfs_device = [0-9]*\.[0-9]*\.[0-9]*.[0-9]* ]] || [[ $nfs_device = \[.*\] ]]; then
nfs_address="${nfs_device%%:*}"
else
lookup=$(host "${nfs_device%%:*}"| grep " address " | head -n1)
nfs_address=${lookup##* }
fi
ifname=$(ip -o route get to $nfs_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
if [ -d /sys/class/net/$ifname/bonding ]; then
dinfo "Found bonded interface '${ifname}'. Make sure to provide an appropriate 'bond=' cmdline."
return
elif [ -e /sys/class/net/$ifname/address ] ; then
ifmac=$(cat /sys/class/net/$ifname/address)
printf 'ifname=%s:%s ' ${ifname} ${ifmac}
fi
printf 'ip=%s:static\n' ${ifname}
}
# called by dracut
install() {
local _i
local _nsslibs
inst_multiple -o portmap rpcbind rpc.statd mount.nfs \
mount.nfs4 umount rpc.idmapd sed /etc/netconfig chmod "$tmpfilesdir/rpcbind.conf"
inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf
if [[ $hostonly_cmdline == "yes" ]]; then
local _netconf="$(cmdline)"
[[ $_netconf ]] && printf "%s\n" "$_netconf" >> "${initdir}/etc/cmdline.d/95nfs.conf"
fi
if [ -f /lib/modprobe.d/nfs.conf ]; then
inst_multiple /lib/modprobe.d/nfs.conf
else
[ -d $initdir/etc/modprobe.d/ ] || mkdir $initdir/etc/modprobe.d
echo "alias nfs4 nfs" > $initdir/etc/modprobe.d/nfs.conf
fi
inst_libdir_file 'libnfsidmap_nsswitch.so*' 'libnfsidmap/*.so' 'libnfsidmap*.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh"
inst_hook cleanup 99 "$moddir/nfsroot-cleanup.sh"
inst "$moddir/nfsroot.sh" "/sbin/nfsroot"
inst "$moddir/nfs-lib.sh" "/lib/nfs-lib.sh"
mkdir -m 0755 -p "$initdir/var/lib/nfs/rpc_pipefs"
mkdir -m 0770 -p "$initdir/var/lib/rpcbind"
[ -d "$dracutsysrootdir/var/lib/nfs/statd/sm" ] && \
mkdir -m 0700 -p "$initdir/var/lib/nfs/statd" && \
mkdir -m 0755 -p "$initdir/var/lib/nfs/statd/sm" && \
chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/statd"
[ -d "$dracutsysrootdir/var/lib/nfs/sm" ] && \
mkdir -m 0755 -p "$initdir/var/lib/nfs/sm" &&
chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/sm"
# Rather than copy the passwd file in, just set a user for rpcbind
# We'll save the state and restart the daemon from the root anyway
grep -E '^nfsnobody:|^rpc:|^rpcuser:' /etc/passwd >> "$initdir/etc/passwd"
grep -E '^nogroup:|^rpc:|^nobody:' /etc/group >> "$initdir/etc/group"
# rpc user needs to be able to write to this directory to save the warmstart
# file
chmod 770 "$initdir/var/lib/rpcbind"
grep -q '^rpc:' /etc/passwd \
&& grep -q '^rpc:' /etc/group
dracut_need_initqueue
}
modules.d/95nfs/nfs-lib.sh 0000755 00000011044 15262675530 0011306 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/net-lib.sh
# TODO: make these things not pollute the calling namespace
# nfs_to_var NFSROOT [NETIF]
# use NFSROOT to set $nfs, $server, $path, and $options.
# NFSROOT is something like: nfs[4]::/[:|,]
# NETIF is used to get information from DHCP options, if needed.
nfs_to_var() {
# Unfortunately, there's multiple styles of nfs "URL" in use, so we need
# extra functions to parse them into $nfs, $server, $path, and $options.
# FIXME: local netif=${2:-$netif}?
case "$1" in
nfs://*) rfc2224_nfs_to_var "$1" ;;
nfs:*[*) anaconda_nfsv6_to_var "$1" ;;
nfs:*:*:/*) anaconda_nfs_to_var "$1" ;;
*) nfsroot_to_var "$1" ;;
esac
# if anything's missing, try to fill it in from DHCP options
if [ -z "$server" ] || [ -z "$path" ]; then nfsroot_from_dhcp $2; fi
# if there's a "%s" in the path, replace it with the hostname/IP
if strstr "$path" "%s"; then
local node=""
read node < /proc/sys/kernel/hostname
[ "$node" = "(none)" ] && node=$(get_ip $2)
path=${path%%%s*}$node${path#*%s} # replace only the first %s
fi
}
# root=nfs:[:][:]
# root=nfs4:[:][:]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# RFC2224: nfs://[:]/
rfc2224_nfs_to_var() {
nfs="nfs"
server="${1#nfs://}"
path="/${server#*/}"
server="${server%%/*}"
server="${server%%:}" # anaconda compat (nfs://:/)
local port="${server##*:}"
[ "$port" != "$server" ] && options="port=$port"
}
# Anaconda-style path with options: nfs:::/
# (without mount options, anaconda is the same as dracut)
anaconda_nfs_to_var() {
nfs="nfs"
options="${1#nfs:}"
server="${options#*:}"
server="${server%:/*}"
options="${options%%:*}"
path="/${1##*:/}"
}
# IPv6 nfs path will be treated separately
anaconda_nfsv6_to_var() {
nfs="nfs"
path="$1"
options="${path#*:/}"
path="/${options%%:*}"
server="${1#*nfs:}"
if str_starts $server '['; then
server="${server%:/*}"
options="${options#*:*}"
else
server="${server%:/*}"
options="${server%%:*}"
server="${server#*:}"
fi
}
# nfsroot_from_dhcp NETIF
# fill in missing server/path from DHCP options.
nfsroot_from_dhcp() {
local f
for f in /tmp/net.$1.override /tmp/dhclient.$1.dhcpopts; do
[ -f $f ] && . $f
done
[ -n "$new_root_path" ] && nfsroot_to_var "$nfs:$new_root_path"
[ -z "$path" ] && [ "$(getarg root=)" = "/dev/nfs" ] && path=/tftpboot/%s
[ -z "$server" ] && server=$srv
[ -z "$server" ] && server=$new_next_server
[ -z "$server" ] && server=$new_dhcp_server_identifier
[ -z "$server" ] && server=${new_root_path%%:*}
}
# Look through $options, fix "rw"/"ro", move "lock"/"nolock" to $nfslock
munge_nfs_options() {
local f="" flags="" nfsrw="ro" OLDIFS="$IFS"
IFS=,
for f in $options; do
case $f in
ro|rw) nfsrw=$f ;;
lock|nolock) nfslock=$f ;;
*) flags=${flags:+$flags,}$f ;;
esac
done
IFS="$OLDIFS"
# Override rw/ro if set on cmdline
getarg ro >/dev/null && nfsrw=ro
getarg rw >/dev/null && nfsrw=rw
options=$nfsrw${flags:+,$flags}
}
# mount_nfs NFSROOT MNTDIR [NETIF]
mount_nfs() {
local nfsroot="$1" mntdir="$2" netif="$3"
local nfs="" server="" path="" options=""
nfs_to_var "$nfsroot" $netif
munge_nfs_options
if [ "$nfs" = "nfs4" ]; then
options=$options${nfslock:+,$nfslock}
else
# NFSv{2,3} doesn't support using locks as it requires a helper to
# transfer the rpcbind state to the new root
[ "$nfslock" = "lock" ] \
&& warn "Locks unsupported on NFSv{2,3}, using nolock" 1>&2
options=$options,nolock
fi
mount -t $nfs -o$options "$server:$path" "$mntdir"
}
modules.d/95nfs/parse-nfsroot.sh 0000755 00000006405 15262675530 0012563 0 ustar 00 #!/bin/sh
#
# Preferred format:
# root=nfs[4]:[server:]path[:options]
#
# This syntax can come from DHCP root-path as well.
#
# Legacy format:
# root=/dev/nfs nfsroot=[server:]path[,options]
#
# In Legacy root=/dev/nfs mode, if the 'nfsroot' parameter is not given
# on the command line or is empty, the dhcp root-path is used as
# [server:]path[:options] or the default "/tftpboot/%s" will be used.
#
# If server is unspecified it will be pulled from one of the following
# sources, in order:
# static ip= option on kernel command line
# DHCP next-server option
# DHCP server-id option
# DHCP root-path option
#
# NFSv4 is only used if explicitly requested with nfs4: prefix, otherwise
# NFSv3 is used.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
[ -z "$nfsroot" ] && nfsroot=$(getarg nfsroot=)
[ -n "$netroot" ] && oldnetroot="$netroot"
# netroot= cmdline argument must be ignored, but must be used if
# we're inside netroot to parse dhcp root-path
if [ -n "$netroot" ] ; then
for n in $(getargs netroot=); do
[ "$n" = "$netroot" ] && break
done
if [ "$n" = "$netroot" ]; then
#warn "Ignoring netroot argument for NFS"
netroot=$root
fi
else
netroot=$root;
fi
# LEGACY: nfsroot= is valid only if root=/dev/nfs
if [ -n "$nfsroot" ] ; then
# @deprecated
warn "Argument nfsroot is deprecated and might be removed in a future release. See 'man dracut.kernel' for more information."
if [ "$(getarg root=)" != "/dev/nfs" ]; then
die "Argument nfsroot only accepted for legacy root=/dev/nfs"
fi
netroot=nfs:$nfsroot;
fi
case "$netroot" in
/dev/nfs) netroot=nfs;;
/dev/*)
if [ -n "$oldnetroot" ]; then
netroot="$oldnetroot"
else
unset netroot
fi
return
;;
# LEGACY: root=:/> /etc/idmapd.conf
fi
nfsroot_to_var $netroot
[ "$path" = "error" ] && die "Argument nfsroot must contain a valid path!"
# Set fstype, might help somewhere
fstype=${nfs#/dev/}
# Rewrite root so we don't have to parse this uglyness later on again
netroot="$fstype:$server:$path:$options"
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
# Shut up init error check or make sure that block parser wont get
# confused by having /dev/nfs[4]
root="$fstype"
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/nfsroot.sh
mkdir -p /var/lib/rpcbind
chown rpc:rpc /var/lib/rpcbind
chmod 770 /var/lib/rpcbind
modules.d/95nfs/nfsroot.sh 0000755 00000001313 15262675530 0011444 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/nfs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=nfs[4]:[server:]path[:options], either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
nfs_to_var $root $netif
[ -z "$server" ] && die "Required parameter 'server' is missing"
mount_nfs $root $NEWROOT $netif && { [ -e /dev/root ] || ln -s null /dev/root ; [ -e /dev/nfs ] || ln -s null /dev/nfs; }
[ -f $NEWROOT/etc/fstab ] && cat $NEWROOT/etc/fstab > /dev/null
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -- "$job"' > $hookdir/initqueue/nfs.sh
# force udevsettle to break
> $hookdir/initqueue/work
need_shutdown
modules.d/95nfs/nfsroot-cleanup.sh 0000755 00000001515 15262675530 0013075 0 ustar 00 #!/bin/sh
type incol2 >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /tmp/nfs.rpc_pipefs_path ] && rpcpipefspath=`cat /tmp/nfs.rpc_pipefs_path`
[ -z "$rpcpipefspath" ] && rpcpipefspath=var/lib/nfs/rpc_pipefs
pid=$(pidof rpc.statd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpc.idmapd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpcbind)
[ -n "$pid" ] && kill $pid
if incol2 /proc/mounts /var/lib/nfs/rpc_pipefs; then
# try to create the destination directory
[ -d $NEWROOT/$rpcpipefspath ] || \
mkdir -m 0755 -p $NEWROOT/$rpcpipefspath 2>/dev/null
if [ -d $NEWROOT/$rpcpipefspath ]; then
# mount --move does not seem to work???
mount --bind /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
else
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
fi
fi
modules.d/95nfs/nfs-start-rpc.sh 0000755 00000001546 15262675530 0012465 0 ustar 00 #!/bin/sh
if modprobe sunrpc || strstr "$(cat /proc/filesystems)" rpc_pipefs; then
[ ! -d /var/lib/nfs/rpc_pipefs/nfs ] && \
mount -t rpc_pipefs rpc_pipefs /var/lib/nfs/rpc_pipefs
# Start rpcbind or rpcbind
# FIXME occasionally saw 'rpcbind: fork failed: No such device' -- why?
command -v portmap >/dev/null && [ -z "$(pidof portmap)" ] && portmap
if command -v rpcbind >/dev/null && [ -z "$(pidof rpcbind)" ]; then
mkdir -p /run/rpcbind
rpcbind
fi
# Start rpc.statd as mount won't let us use locks on a NFSv4
# filesystem without talking to it. NFSv4 does locks internally,
# rpc.lockd isn't needed
[ -z "$(pidof rpc.statd)" ] && rpc.statd
[ -z "$(pidof rpc.idmapd)" ] && rpc.idmapd
else
warn 'Kernel module "sunrpc" not in the initramfs, or support for filesystem "rpc_pipefs" missing!'
fi
modules.d/90qemu/module-setup.sh 0000755 00000002015 15262675530 0012551 0 ustar 00 #!/bin/bash
# called by dracut
check() {
if [[ $hostonly ]] || [[ $mount_needs ]]; then
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm 2>/dev/null)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Red Hat" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
fi
return 0
}
# called by dracut
installkernel() {
# qemu specific modules
hostonly='' instmods \
ata_piix ata_generic pata_acpi cdrom sr_mod ahci \
virtio_blk virtio virtio_ring virtio_pci \
virtio_scsi virtio_console virtio_rng virtio_mem \
spapr-vscsi \
qemu_fw_cfg
}
modules.d/90livenet/module-setup.sh 0000755 00000001116 15262675530 0013251 0 ustar 00 #!/bin/bash
# module-setup.sh for livenet
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo network url-lib dmsquash-live img-lib
return 0
}
# called by dracut
install() {
inst_hook cmdline 29 "$moddir/parse-livenet.sh"
inst_hook initqueue/online 95 "$moddir/fetch-liveupdate.sh"
inst_script "$moddir/livenetroot.sh" "/sbin/livenetroot"
if dracut_module_included "systemd-initrd"; then
inst_script "$moddir/livenet-generator.sh" $systemdutildir/system-generators/dracut-livenet-generator
fi
dracut_need_initqueue
}
modules.d/90livenet/livenetroot.sh 0000755 00000001240 15262675530 0013176 0 ustar 00 #!/bin/sh
# livenetroot - fetch a live image from the network and run it
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/url-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
[ -e /tmp/livenet.downloaded ] && exit 0
# args get passed from 40network/netroot
netroot="$2"
liveurl="${netroot#livenet:}"
info "fetching $liveurl"
imgfile=$(fetch_url "$liveurl")
if [ $? != 0 ]; then
warn "failed to download live image: error $?"
exit 1
fi
> /tmp/livenet.downloaded
# TODO: couldn't dmsquash-live-root handle this?
if [ ${imgfile##*.} = "iso" ]; then
root=$(losetup -f)
losetup $root $imgfile
else
root=$imgfile
fi
exec /sbin/dmsquash-live-root $root
modules.d/90livenet/livenet-generator.sh 0000755 00000004227 15262675530 0014266 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -z "$root" ] && root=$(getarg root=)
# support legacy syntax of passing liveimg and then just the base root
if getargbool 0 rd.live.image -d -y liveimg; then
liveroot="live:$root"
fi
if [ "${root%%:*}" = "live" ] ; then
liveroot=$root
fi
[ "${liveroot%%:*}" = "live" ] || exit 0
case "$liveroot" in
live:nfs://*|nfs://*) \
root="${root#live:}"
rootok=1 ;;
live:http://*|http://*) \
root="${root#live:}"
rootok=1 ;;
live:https://*|https://*) \
root="${root#live:}"
rootok=1 ;;
live:ftp://*|ftp://*) \
root="${root#live:}"
rootok=1 ;;
live:torrent://*|torrent://*) \
root="${root#live:}"
rootok=1 ;;
live:tftp://*|tftp://*) \
root="${root#live:}"
rootok=1 ;;
esac
[ "$rootok" != "1" ] && exit 0
GENERATOR_DIR="$2"
[ -z "$GENERATOR_DIR" ] && exit 1
[ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR"
getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
getargbool 0 rd.live.overlay.overlayfs && overlayfs="yes"
[ -e /xor_overlayfs ] && xor_overlayfs="yes"
[ -e /xor_readonly ] && xor_readonly="--readonly"
ROOTFLAGS="$(getarg rootflags)"
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "[Mount]"
echo "Where=/sysroot"
if [ "$overlayfs$xor_overlayfs" = "yes" ]; then
echo "What=LiveOS_rootfs"
if [ "$readonly_overlay$xor_readonly" = "--readonly" ]; then
ovlfs=lowerdir=/run/overlayfs-r:/run/rootfsbase
else
ovlfs=lowerdir=/run/rootfsbase
fi
echo "Options=${ROOTFLAGS},${ovlfs},upperdir=/run/overlayfs,workdir=/run/ovlwork"
echo "Type=overlay"
_dev=LiveOS_rootfs
else
echo "What=/dev/mapper/live-rw"
[ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}"
_dev=$'dev-mapper-live\\x2drw'
fi
} > "$GENERATOR_DIR"/sysroot.mount
mkdir -p "$GENERATOR_DIR/$_dev.device.d"
{
echo "[Unit]"
echo "JobTimeoutSec=3000"
echo "JobRunningTimeoutSec=3000"
} > "$GENERATOR_DIR/$_dev.device.d/timeout.conf"
modules.d/90livenet/parse-livenet.sh 0000755 00000001716 15262675530 0013412 0 ustar 00 #!/bin/sh
# live net images - just like live images, but specified like:
# root=live:[url-to-backing-file]
[ -z "$root" ] && root=$(getarg root=)
. /lib/url-lib.sh
# live updates
updates=$(getarg live.updates=)
if [ -n "$updates" ]; then
# make sure network comes up even if we're doing a local live device
if [ -z "$netroot" ]; then
echo > /tmp/net.ifaces
fi
echo "$updates" > /tmp/liveupdates.info
echo '[ -e /tmp/liveupdates.done ]' > \
$hookdir/initqueue/finished/liveupdates.sh
fi
str_starts "$root" "live:" && liveurl="$root"
str_starts "$liveurl" "live:" || return
liveurl="${liveurl#live:}"
# setting netroot to "livenet:..." makes "livenetroot" get run after ifup
if get_url_handler "$liveurl" >/dev/null; then
info "livenet: root image at $liveurl"
netroot="livenet:$liveurl"
root="livenet" # quiet complaints from init
rootok=1
wait_for_dev -n /dev/root
else
info "livenet: no url handler for $liveurl"
fi
modules.d/90livenet/fetch-liveupdate.sh 0000755 00000001531 15262675530 0014060 0 ustar 00 #!/bin/bash
# fetch-liveupdate - fetch an update image for dmsquash-live media.
# this gets called by the "initqueue/online" hook for each network interface
# that comes online.
# no updates requested? we're not needed.
[ -e /tmp/liveupdates.info ] || return 0
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v fetch_url >/dev/null || . /lib/url-lib.sh
command -v unpack_img >/dev/null || . /lib/img-lib.sh
read url < /tmp/liveupdates.info
info "fetching live updates from $url"
fetch_url "$url" /tmp/updates.img
if [ $? != 0 ]; then
warn "failed to fetch update image!"
warn "url: $url"
return 1
fi
unpack_img /tmp/updates.img /updates.tmp.$$
if [ $? != 0 ]; then
warn "failed to unpack update image!"
warn "url: $url"
return 1
fi
copytree /updates.tmp.$$ /updates
mv /tmp/liveupdates.info /tmp/liveupdates.done
modules.d/95resume/module-setup.sh 0000755 00000003600 15262675530 0013110 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# No point trying to support resume, if no swap partition exist
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs =~ ^(swap|swsuspend|swsupend)$ ]] && return 0
done
return 255
}
return 0
}
# called by dracut
cmdline() {
local _resume
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} =~ ^(swap|swsuspend|swsupend)$ ]] || continue
_resume=$(shorten_persistent_dev "$(get_persistent_dev "$dev")")
[[ -n ${_resume} ]] && printf " resume=%s" "${_resume}"
done
}
# called by dracut
install() {
local _bin
if [[ $hostonly_cmdline == "yes" ]]; then
local _resumeconf=$(cmdline)
[[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf"
fi
# if systemd is included and has the hibernate-resume tool, use it and nothing else
if dracut_module_included "systemd" && [[ -x $systemdutildir/systemd-hibernate-resume ]]; then
inst_multiple -o \
$systemdutildir/system-generators/systemd-hibernate-resume-generator \
$systemdsystemunitdir/systemd-hibernate-resume@.service \
$systemdutildir/systemd-hibernate-resume
return 0
fi
# Optional uswsusp support
for _bin in /usr/sbin/resume /usr/lib/suspend/resume /usr/lib/uswsusp/resume
do
[[ -x "${_bin}" ]] && {
inst "${_bin}" /usr/sbin/resume
[[ $hostonly ]] && [[ -f /etc/suspend.conf ]] && inst -H /etc/suspend.conf
break
}
done
if ! dracut_module_included "systemd"; then
inst_hook cmdline 10 "$moddir/parse-resume.sh"
else
inst_script "$moddir/parse-resume.sh" /lib/dracut/parse-resume.sh
fi
inst_script "$moddir/resume.sh" /lib/dracut/resume.sh
}
modules.d/95resume/resume.sh 0000755 00000001060 15262675530 0011763 0 ustar 00 #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
[ -s /.resume -a -b "$resume" ] && {
# First try user level resume; it offers splash etc
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
[ -x "$(command -v resume)" ] && command resume $a_splash "$resume"
# parsing the output of ls is Bad, but until there is a better way...
ls -lH "$resume" | (
read x x x x maj min x;
echo "${maj%,}:$min"> /sys/power/resume)
>/.resume
}
modules.d/95resume/parse-resume.sh 0000755 00000007047 15262675530 0013106 0 ustar 00 #!/bin/sh
if resume=$(getarg resume=) && ! getarg noresume; then
export resume
echo "$resume" >/.resume
else
unset resume
fi
case "$resume" in
LABEL=*) \
resume="$(echo $resume | sed 's,/,\\x2f,g')"
resume="/dev/disk/by-label/${resume#LABEL=}" ;;
UUID=*) \
resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
PARTUUID=*) \
resume="/dev/disk/by-partuuid/${resume#PARTUUID=}" ;;
PARTLABEL=*) \
resume="/dev/disk/by-partlabel/${resume#PARTLABEL=}" ;;
esac
if splash=$(getarg splash=); then
export splash
else
unset splash
fi
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
if ! getarg noresume; then
if [ -n "$resume" ]; then
wait_for_dev /dev/resume
{
printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
${resume#/dev/};
printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
${resume#/dev/};
} >> /etc/udev/rules.d/99-resume-link.rules
{
if [ -x /usr/sbin/resume ]; then
printf -- 'KERNEL=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
"$a_splash" "$resume";
printf -- 'SYMLINK=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
"$a_splash" "$resume";
fi
printf -- 'KERNEL=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'
printf -- 'SYMLINK=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'
} >> /etc/udev/rules.d/99-resume.rules
printf '[ -e "%s" ] && { ln -fs "%s" /dev/resume 2> /dev/null; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
"$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh
{
printf -- "%s" 'warn "Cancelling resume operation. Device not found.";'
printf -- ' cancel_wait_for_dev /dev/resume; rm -f -- "$job" "%s/initqueue/settled/resume.sh";\n' "$hookdir"
} >> $hookdir/initqueue/timeout/resume.sh
mv /lib/dracut/resume.sh /lib/dracut/hooks/pre-mount/10-resume.sh
else
{
if [ -x /usr/sbin/resume ]; then
printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- ' RUN+="/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s $tempnode"\n' "$a_splash"
fi
printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"';
} >> /etc/udev/rules.d/99-resume.rules
fi
fi
modules.d/90dmraid/module-setup.sh 0000755 00000004113 15262675530 0013043 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _rootdev
# if we don't have dmraid installed on the host system, no point
# in trying to support it in the initramfs.
require_binaries dmraid || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
[[ -e "$holder/dm" ]] && return 0
break
done
done
return 255
}
return 0
}
# called by dracut
depends() {
echo dm rootfs-block
return 0
}
# called by dracut
cmdline() {
local _activated
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
local holder DEVPATH DM_NAME majmin
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
dev="/dev/${holder##*/}"
DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)"
[[ ${DM_NAME} ]] && break
done
[[ ${DM_NAME} ]] || continue
if ! [[ ${_activated[${DM_NAME}]} ]]; then
printf "%s" " rd.dm.uuid=${DM_NAME}"
_activated["${DM_NAME}"]=1
fi
done
}
# called by dracut
install() {
local _i
if [[ $hostonly_cmdline == "yes" ]]; then
local _raidconf=$(cmdline)
[[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90dmraid.conf"
fi
inst_multiple dmraid
inst_multiple -o kpartx
inst $(command -v partx) /sbin/partx
inst "$moddir/dmraid.sh" /sbin/dmraid_scan
inst_rules 66-kpartx.rules 67-kpartx-compat.rules
inst_libdir_file "libdmraid-events*.so*"
inst_rules "$moddir/61-dmraid-imsm.rules"
#inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
}
modules.d/90dmraid/dmraid.sh 0000755 00000002266 15262675530 0011667 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
dev="$1"
devenc=$(str_replace "$1" '/' '\2f')
[ -e /tmp/dmraid.$devenc ] && exit 0
>/tmp/dmraid.$devenc
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
DM_CLEANUP="no"
# run dmraid if udev has settled
info "Scanning for dmraid devices $DM_RAIDS"
SETS=$(dmraid -c -s)
if [ "$SETS" = "no raid disks" -o "$SETS" = "no raid sets" ]; then
return
fi
info "Found dmraid sets:"
echo $SETS|vinfo
if [ -n "$DM_RAIDS" ]; then
# only activate specified DM RAIDS
for r in $DM_RAIDS; do
for s in $SETS; do
if [ "${s##$r}" != "$s" ]; then
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
fi
done
done
else
# scan and activate all DM RAIDS
for s in $SETS; do
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
udevsettle
done
fi
need_shutdown
fi
modules.d/90dmraid/61-dmraid-imsm.rules 0000644 00000001631 15262675530 0013566 0 ustar 00 # This file causes block devices with RAID (dmraid) signatures to
# automatically cause dmraid_scan to be run.
# See udev(8) for syntax
SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end"
ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="dm_end"
ENV{ID_FS_TYPE}!="*_raid_member", GOTO="dm_end"
ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}!="?*", GOTO="dm_end"
ENV{rd_NO_DM}=="?*", GOTO="dm_end"
OPTIONS:="nowatch"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="dm_end"
RUN+="/sbin/initqueue --onetime --unique --settled /sbin/dmraid_scan $env{DEVNAME}"
LABEL="dm_end"
modules.d/90dmraid/parse-dm.sh 0000755 00000001472 15262675530 0012135 0 ustar 00 #!/bin/sh
# nodmraid for anaconda / rc.sysinit compatibility
if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then
info "rd.dm=0: removing DM RAID activation"
udevproperty rd_NO_DM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
fi
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -z "$DM_RAIDS" ] && ! getargbool 0 rd.auto; then
udevproperty rd_NO_DM=1
fi
modules.d/95cifs/cifs-lib.sh 0000755 00000001711 15262675530 0011602 0 ustar 00 #!/bin/sh
# cifs_to_var CIFSROOT
# use CIFSROOT to set $server, $path, and $options.
# CIFSROOT is something like: cifs://[[:]]@/
# NETIF is used to get information from DHCP options, if needed.
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
cifs_to_var() {
local cifsuser; local cifspass
# Check required arguments
server=${1##cifs://}
cifsuser=${server%@*}
cifspass=${cifsuser#*:}
if [ "$cifspass" != "$cifsuser" ]; then
cifsuser=${cifsuser%:*}
else
cifspass=$(getarg cifspass)
fi
if [ "$cifsuser" != "$server" ]; then
server="${server#*@}"
else
cifsuser=$(getarg cifsuser)
fi
path=${server#*/}
server=${server%/*}
if [ ! "$cifsuser" -o ! "$cifspass" ]; then
die "For CIFS support you need to specify a cifsuser and cifspass either in the cifsuser and cifspass commandline parameters or in the root= CIFS URL."
fi
options="user=$cifsuser,pass=$cifspass"
}
modules.d/95cifs/module-setup.sh 0000755 00000002363 15262675530 0012541 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# If our prerequisites are not met, fail anyways.
require_binaries mount.cifs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "cifs" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
# called by dracut
installkernel() {
instmods cifs ipv6
# hash algos
instmods md4 md5 sha256
# ciphers
instmods aes arc4 des ecb
# macs
instmods hmac cmac
}
# called by dracut
install() {
local _i
local _nsslibs
inst_multiple -o mount.cifs
inst_multiple /etc/services /etc/nsswitch.conf /etc/protocols
inst_libdir_file 'libcap-ng.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-cifsroot.sh"
inst "$moddir/cifsroot.sh" "/sbin/cifsroot"
inst "$moddir/cifs-lib.sh" "/lib/cifs-lib.sh"
dracut_need_initqueue
}
modules.d/95cifs/cifsroot.sh 0000755 00000001141 15262675530 0011737 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=cifs://user:pass@[server]/[folder] either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
cifs_to_var $root
echo server: $server
echo path: $path
echo options: $options
mount.cifs //$server/$path $NEWROOT -o $options && { [ -e /dev/root ] || ln -s null /dev/root ; }
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -f -- "$job"' > $hookdir/initqueue/cifs.sh
# force udevsettle to break
> $hookdir/initqueue/work
modules.d/95cifs/parse-cifsroot.sh 0000755 00000002236 15262675530 0013055 0 ustar 00 #!/bin/sh
#
# root=cifs://[user:pass@]/
#
# This syntax can come from DHCP root-path as well.
#
# If a username or password are not specified as part of the root, then they
# will be pulled from cifsuser and cifspass on the kernel command line,
# respectively.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "cifs" ] && break
done
[ "${netroot%%:*}" = "cifs" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "cifs" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not cifs we don't continue
[ "${netroot%%:*}" = "cifs" ] || return
# Check required arguments
cifs_to_var $netroot
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/cifsroot.sh
modules.d/90qemu-net/module-setup.sh 0000755 00000001442 15262675530 0013340 0 ustar 00 #!/bin/bash
# called by dracut
check() {
if [[ $hostonly ]] || [[ $mount_needs ]]; then
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
fi
return 0
}
# called by dracut
installkernel() {
# qemu specific modules
hostonly='' instmods virtio_net e1000 8139cp pcnet32 e100 ne2k_pci
}
modules.d/98dracut-systemd/dracut-pre-trigger.service.8.asc 0000644 00000000670 15262675530 0017611 0 ustar 00 DRACUT-PRE-TRIGGER.SERVICE(8)
=============================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-trigger.service - runs the dracut hooks before udevd is triggered
SYNOPSIS
--------
dracut-pre-trigger.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is triggered in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/module-setup.sh 0000755 00000004030 15262675530 0014561 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd-initrd"; then
derror "dracut-systemd needs systemd-initrd in the initramfs"
return 1
fi
return 0
}
# called by dracut
depends() {
echo "systemd-initrd"
return 0
}
installkernel() {
return 0
}
# called by dracut
install() {
local _mods
inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
for i in \
dracut-cmdline.service \
dracut-cmdline-ask.service \
dracut-initqueue.service \
dracut-mount.service \
dracut-pre-mount.service \
dracut-pre-pivot.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do
inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
systemctl -q --root "$initdir" add-wants initrd.target "$i"
done
inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf"
}
modules.d/98dracut-systemd/rootfs-generator.sh 0000755 00000010070 15262675530 0015437 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
generator_wait_for_dev()
{
local _name
local _timeout
_name="$(str_replace "$1" '/' '\x2f')"
_timeout=$(getarg rd.timeout)
_timeout=${_timeout:-0}
if ! [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ]; then
# If a LUKS device needs unlocking via systemd in the initrd, assume
# it's for the root device. In that case, don't block on it if it's
# after remote-fs-pre.target since the initqueue is ordered before it so
# it will never actually show up (think Tang-pinned rootfs).
cat > "$hookdir/initqueue/finished/devexists-${_name}.sh" << EOF
if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then
[ -e "$1" ]
fi
EOF
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "$hookdir/emergency/80-${_name}.sh"
fi
_name=$(dev_unit_name "$1")
if ! [ -L "$GENERATOR_DIR"/initrd.target.wants/${_name}.device ]; then
[ -d "$GENERATOR_DIR"/initrd.target.wants ] || mkdir -p "$GENERATOR_DIR"/initrd.target.wants
ln -s ../${_name}.device "$GENERATOR_DIR"/initrd.target.wants/${_name}.device
fi
if ! [ -f "$GENERATOR_DIR"/${_name}.device.d/timeout.conf ]; then
mkdir -p "$GENERATOR_DIR"/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
echo "JobRunningTimeoutSec=$_timeout"
} > "$GENERATOR_DIR"/${_name}.device.d/timeout.conf
fi
}
generator_mount_rootfs()
{
local _type=$2
local _flags=$3
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d "$GENERATOR_DIR" ] || mkdir -p "$GENERATOR_DIR"
if ! [ -f "$GENERATOR_DIR"/sysroot.mount ]; then
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "Requires=systemd-fsck@${_name}.service"
echo "After=systemd-fsck@${_name}.service"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=$1"
echo "Options=${_flags}"
echo "Type=${_type}"
} > "$GENERATOR_DIR"/sysroot.mount
fi
if ! [ -L "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount ]; then
[ -d "$GENERATOR_DIR"/initrd-root-fs.target.requires ] || mkdir -p "$GENERATOR_DIR"/initrd-root-fs.target.requires
ln -s ../sysroot.mount "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount
fi
}
generator_fsck_after_pre_mount()
{
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d /run/systemd/generator/systemd-fsck@${_name}.service.d ] || mkdir -p /run/systemd/generator/systemd-fsck@${_name}.service.d
if ! [ -f /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf ]; then
{
echo "[Unit]"
echo "After=dracut-pre-mount.service"
} > /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf
fi
}
root=$(getarg root=)
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/nfs) # ignore legacy /dev/nfs
;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
GENERATOR_DIR="$1"
if [ "$rootok" = "1" ]; then
generator_wait_for_dev "${root#block:}" "$RDRETRY"
generator_fsck_after_pre_mount "${root#block:}"
strstr "$(cat /proc/cmdline)" 'root=' || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)"
fi
exit 0
modules.d/98dracut-systemd/dracut-initqueue.service.8 0000644 00000003016 15262675530 0016622 0 ustar 00 '\" t
.\" Title: dracut-initqueue.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-INITQUEUE\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-initqueue.service \- runs the dracut main loop to find the real root
.SH "SYNOPSIS"
.sp
dracut\-initqueue\&.service
.SH "DESCRIPTION"
.sp
This service runs all the main loop of dracut in the initramfs to find the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-cmdline.service.8.asc 0000644 00000000672 15262675530 0016777 0 ustar 00 DRACUT-CMDLINE.SERVICE(8)
=========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-cmdline.service - runs the dracut hooks to parse the kernel command line
SYNOPSIS
--------
dracut-cmdline.service
DESCRIPTION
-----------
This service runs all the dracut hooks to parse the kernel command line in
the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-cmdline-ask.service 0000644 00000001517 15262675530 0016637 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut ask for additional cmdline parameters
DefaultDependencies=no
Before=dracut-cmdline.service
After=systemd-journald.socket
After=systemd-vconsole-setup.service
Requires=systemd-vconsole-setup.service
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionKernelCommandLine=|rd.cmdline=ask
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline-ask
StandardInput=tty
StandardOutput=inherit
StandardError=inherit
RemainAfterExit=yes
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-initqueue.service.8.asc 0000644 00000000667 15262675530 0017400 0 ustar 00 DRACUT-INITQUEUE.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-initqueue.service - runs the dracut main loop to find the real root
SYNOPSIS
--------
dracut-initqueue.service
DESCRIPTION
-----------
This service runs all the main loop of dracut in the initramfs to find the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-pre-udev.service.8.asc 0000644 00000000650 15262675530 0017107 0 ustar 00 DRACUT-PRE-UDEV.SERVICE(8)
==========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-udev.service - runs the dracut hooks before udevd is started
SYNOPSIS
--------
dracut-pre-udev.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is started in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-mount.service 0000644 00000001431 15262675530 0015605 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut mount hook
Documentation=man:dracut-mount.service(8)
After=initrd-root-fs.target initrd-parse-etc.service
After=dracut-initqueue.service dracut-pre-mount.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/mount
ConditionKernelCommandLine=|rd.break=mount
DefaultDependencies=no
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-cmdline.sh 0000755 00000005133 15262675530 0015036 0 ustar 00 #!/bin/sh
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION" ] && info "dracut-$VERSION"
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
info "Using kernel command line parameters:" $(getcmdline)
getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf
getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf
source_conf /etc/conf.d
# Get the "root=" parameter from the kernel command line, but differentiate
# between the case where it was set to the empty string and the case where it
# wasn't specified at all.
if ! root="$(getarg root=)"; then
root_unset='UNSET'
fi
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
export root
export rflags
export fstype
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh
case "${root}${root_unset}" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
UNSET|gpt-auto)
# systemd's gpt-auto-generator handles this case.
rootok=1 ;;
esac
[ -z "${root}${root_unset}" ] && die "Empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/emergency.service 0000644 00000001264 15262675530 0015145 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target
Before=shutdown.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/dracut-emergency
ExecStopPost=-/usr/bin/systemctl --fail --no-block default
Type=idle
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-pivot.service.8 0000644 00000003005 15262675530 0016535 0 ustar 00 '\" t
.\" Title: dracut-pre-pivot.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-PIVOT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-pivot.service \- runs the dracut hooks before switching root
.SH "SYNOPSIS"
.sp
dracut\-pre\-pivot\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the system switched to the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-mount.sh 0000755 00000000766 15262675530 0015360 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-pre-mount.service 0000644 00000001466 15262675530 0016401 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-mount hook
Documentation=man:dracut-pre-mount.service(8)
DefaultDependencies=no
Before=initrd-root-fs.target sysroot.mount systemd-fsck-root.service
After=dracut-initqueue.service cryptsetup.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount
ConditionKernelCommandLine=|rd.break=pre-mount
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-udev.service 0000644 00000001741 15262675530 0016176 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-udev hook
Documentation=man:dracut-pre-udev.service(8)
DefaultDependencies=no
Before=systemd-udevd.service dracut-pre-trigger.service
After=dracut-cmdline.service
Wants=dracut-cmdline.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev
ConditionKernelCommandLine=|rd.break=pre-udev
ConditionKernelCommandLine=|rd.driver.blacklist
ConditionKernelCommandLine=|rd.driver.pre
ConditionKernelCommandLine=|rd.driver.post
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-udev
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-shutdown.service.8 0000644 00000007345 15262675530 0016476 0 ustar 00 '\" t
.\" Title: dracut-shutdown.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 08/13/2026
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-SHUTDOWN\&.S" "8" "08/13/2026" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-shutdown.service \- unpack the initramfs to /run/initramfs
.SH "SYNOPSIS"
.sp
dracut\-shutdown\&.service
.SH "DESCRIPTION"
.sp
This service unpacks the initramfs image to /run/initramfs\&. systemd pivots into /run/initramfs at shutdown, so the root filesystem can be safely unmounted\&.
.sp
The following steps are executed during a shutdown:
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd switches to the shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd starts /lib/systemd/system/shutdown\&.target\&.wants/dracut\-shutdown\&.service
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
dracut\-shutdown\&.service executes /usr/lib/dracut/dracut\-initramfs\-restore which unpacks the initramfs to /run/initramfs
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd finishes shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd kills all processes
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd tries to unmount everything and mounts the remaining read\-only
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd checks, if there is a /run/initramfs/shutdown executable
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if yes, it does a pivot_root to /run/initramfs and executes \&./shutdown\&. The old root is then mounted on /oldroot\&. /usr/lib/dracut/modules\&.d/99shutdown/shutdown\&.sh is the shutdown executable\&.
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
.RE
.sp
This ensures, that all devices are disassembled and unmounted cleanly\&.
.sp
To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd\&.break=pre\-shutdown rd\&.shell" or "rd\&.break=shutdown rd\&.shell"\&.
.sp
.if n \{\
.RS 4
.\}
.nf
# mkdir \-p /run/initramfs/etc/cmdline\&.d
# echo "rd\&.break=pre\-shutdown rd\&.shell" > /run/initramfs/etc/cmdline\&.d/debug\&.conf
# touch /run/initramfs/\&.need_shutdown
.fi
.if n \{\
.RE
.\}
.sp
In case the unpack of the initramfs fails, dracut\-shutdown\-onfailure\&.service executes to make sure switch root doesn\(cqt happen, since it would result in switching to an incomplete initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-pivot.sh 0000755 00000001577 15262675530 0015360 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
_bv=$(getarg rd.break -d rdbreak) && [ -z "$_bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset _bv
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
[ -h /dev/nfs ] && rm -f -- /dev/nfs
exit 0
modules.d/98dracut-systemd/dracut-emergency.service 0000644 00000001251 15262675530 0016421 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Dracut Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target emergency.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=-/bin/dracut-emergency
ExecStopPost=-/bin/rm -f -- /.console_lock
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-pivot.service.8.asc 0000644 00000000655 15262675530 0017312 0 ustar 00 DRACUT-PRE-PIVOT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-pivot.service - runs the dracut hooks before switching root
SYNOPSIS
--------
dracut-pre-pivot.service
DESCRIPTION
-----------
This service runs all dracut hooks before the system switched to the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-cmdline.service 0000644 00000001610 15262675530 0016055 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut cmdline hook
Documentation=man:dracut-cmdline.service(8)
DefaultDependencies=no
Before=dracut-pre-udev.service
After=systemd-journald.socket
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline
ConditionKernelCommandLine=|rd.break=cmdline
ConditionKernelCommandLine=|resume
ConditionKernelCommandLine=|noresume
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-initqueue.sh 0000755 00000004143 15262675530 0015433 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevadm settle --exit-if-exists=$hookdir/initqueue/work
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- "$hookdir/initqueue/work"
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
for i in /run/systemd/ask-password/ask.*; do
[ -e "$i" ] && continue 2
done
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
warn "dracut-initqueue timeout - starting timeout scripts"
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
[ $main_loop -eq 0 ] && break
done
fi
main_loop=$(($main_loop+1))
if [ $main_loop -gt $RDRETRY ]; then
if ! [ -f /sysroot/etc/fstab ] || ! [ -e /sysroot/sbin/init ] ; then
emergency_shell "Could not boot."
fi
warn "Not all disks have been found."
warn "You might want to regenerate your initramfs."
break
fi
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-pre-trigger.service 0000644 00000001622 15262675530 0016674 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-trigger hook
Documentation=man:dracut-pre-trigger.service(8)
DefaultDependencies=no
Before=systemd-udev-trigger.service dracut-initqueue.service
After=dracut-pre-udev.service systemd-udevd.service systemd-tmpfiles-setup-dev.service
Wants=dracut-pre-udev.service systemd-udevd.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger
ConditionKernelCommandLine=|rd.break=pre-trigger
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-trigger
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-shutdown.service 0000644 00000000670 15262675530 0016322 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Restore /run/initramfs on shutdown
Documentation=man:dracut-shutdown.service(8)
After=local-fs.target boot.mount boot.automount
Wants=local-fs.target
ConditionPathExists=!/run/initramfs/bin/sh
OnFailure=dracut-shutdown-onfailure.service
[Service]
RemainAfterExit=yes
Type=oneshot
ExecStart=/bin/true
ExecStop=/usr/lib/dracut/dracut-initramfs-restore
modules.d/98dracut-systemd/dracut-pre-trigger.service.8 0000644 00000003016 15262675530 0017041 0 ustar 00 '\" t
.\" Title: dracut-pre-trigger.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-TRIGGER" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-trigger.service \- runs the dracut hooks before udevd is triggered
.SH "SYNOPSIS"
.sp
dracut\-pre\-trigger\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is triggered in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-mount.service.8 0000644 00000002773 15262675530 0015765 0 ustar 00 '\" t
.\" Title: dracut-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-MOUNT\&.SERV" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-mount.service \- runs the dracut hooks after /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks after the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-cmdline-ask.sh 0000755 00000000642 15262675530 0015612 0 ustar 00 #!/bin/bash
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
getarg "rd.cmdline=ask" || exit 0
sleep 0.5
echo
sleep 0.5
echo
sleep 0.5
echo
echo
echo
echo
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -e -p "> " line || [ -n "$line" ]; do
[[ "$line" == "." ]] && break
[[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
exit 0
modules.d/98dracut-systemd/dracut-emergency.sh 0000755 00000002546 15262675530 0015406 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
type plymouth >/dev/null 2>&1 && plymouth quit
export _rdshell_name="dracut" action="Boot" hook="emergency"
_emergency_action=$(getarg rd.emergency)
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
FSTXT="/run/dracut/fsck/fsck_help_$fstype.txt"
source_hook "$hook"
echo
rdsosreport
echo
echo
echo 'Entering emergency mode. Exit the shell to continue.'
echo 'Type "journalctl" to view system logs.'
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
echo
echo
[ -f "$FSTXT" ] && cat "$FSTXT"
[ -f /etc/profile ] && . /etc/profile
[ -z "$PS1" ] && export PS1="$_name:\${PWD}# "
exec sh -i -l
else
export hook="shutdown-emergency"
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
source_hook "$hook"
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
/bin/rm -f -- /.console_lock
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
exit 0
modules.d/98dracut-systemd/dracut-initqueue.service 0000644 00000001465 15262675530 0016462 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut initqueue hook
Documentation=man:dracut-initqueue.service(8)
DefaultDependencies=no
Before=remote-fs-pre.target
Wants=remote-fs-pre.target
After=systemd-udev-trigger.service
Wants=systemd-udev-trigger.service
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExists=|/lib/dracut/need-initqueue
ConditionKernelCommandLine=|rd.break=initqueue
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-initqueue
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-mount.service.8 0000644 00000003012 15262675530 0016534 0 ustar 00 '\" t
.\" Title: dracut-pre-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-MOUNT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-mount.service \- runs the dracut hooks before /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-pre\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-tmpfiles.conf 0000644 00000000207 15262675530 0015553 0 ustar 00 d /run/initramfs 0755 root root -
d /run/initramfs/log 0755 root root -
L /var/log - - - - ../run/initramfs/log
modules.d/98dracut-systemd/dracut-mount.service.8.asc 0000644 00000000640 15262675530 0016521 0 ustar 00 DRACUT-MOUNT.SERVICE(8)
=======================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-mount.service - runs the dracut hooks after /sysroot is mounted
SYNOPSIS
--------
dracut-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks after the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-pre-udev.service.8 0000644 00000003001 15262675530 0016333 0 ustar 00 '\" t
.\" Title: dracut-pre-udev.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-UDEV\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-udev.service \- runs the dracut hooks before udevd is started
.SH "SYNOPSIS"
.sp
dracut\-pre\-udev\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is started in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-udev.sh 0000755 00000002605 15262675530 0015153 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-udev' 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break pre-udev"
source_hook pre-udev
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
unset i
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-shutdown.service.8.asc 0000644 00000003530 15262675530 0017233 0 ustar 00 DRACUT-SHUTDOWN.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-shutdown.service - unpack the initramfs to /run/initramfs
SYNOPSIS
--------
dracut-shutdown.service
DESCRIPTION
-----------
This service unpacks the initramfs image to /run/initramfs.
systemd pivots into /run/initramfs at shutdown, so the root filesystem
can be safely unmounted.
The following steps are executed during a shutdown:
* systemd switches to the shutdown.target
* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore which unpacks the initramfs to /run/initramfs
* systemd finishes shutdown.target
* systemd kills all processes
* systemd tries to unmount everything and mounts the remaining read-only
* systemd checks, if there is a /run/initramfs/shutdown executable
* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown. The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
This ensures, that all devices are disassembled and unmounted cleanly.
To debug the shutdown process, you can get a shell in the shutdown procedure
by injecting "rd.break=pre-shutdown rd.shell" or "rd.break=shutdown rd.shell".
----
# mkdir -p /run/initramfs/etc/cmdline.d
# echo "rd.break=pre-shutdown rd.shell" > /run/initramfs/etc/cmdline.d/debug.conf
# touch /run/initramfs/.need_shutdown
----
In case the unpack of the initramfs fails, dracut-shutdown-onfailure.service
executes to make sure switch root doesn't happen, since it would result in
switching to an incomplete initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut*(8)
modules.d/98dracut-systemd/dracut-pre-trigger.sh 0000755 00000000723 15262675530 0015652 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
source_hook pre-trigger
getarg 'rd.break=pre-trigger' 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break pre-trigger"
udevadm control --reload >/dev/null 2>&1 || :
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-cmdline.service.8 0000644 00000003023 15262675530 0016223 0 ustar 00 '\" t
.\" Title: dracut-cmdline.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-CMDLINE\&.SE" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-cmdline.service \- runs the dracut hooks to parse the kernel command line
.SH "SYNOPSIS"
.sp
dracut\-cmdline\&.service
.SH "DESCRIPTION"
.sp
This service runs all the dracut hooks to parse the kernel command line in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-pivot.service 0000644 00000002145 15262675530 0016373 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-pivot and cleanup hook
Documentation=man:dracut-pre-pivot.service(8)
DefaultDependencies=no
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service
Before=initrd-cleanup.service
Wants=remote-fs.target
After=remote-fs.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-pivot
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cleanup
ConditionKernelCommandLine=|rd.break=pre-pivot
ConditionKernelCommandLine=|rd.break=cleanup
ConditionKernelCommandLine=|rd.break
ConditionPathExists=|/dev/root
ConditionPathExists=|/dev/nfs
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-pivot
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-mount.sh 0000755 00000002034 15262675530 0014562 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
i=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
i=$(($i+1))
[ $i -gt 20 ] && emergency_shell "Can't mount root filesystem"
done
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-pre-mount.service.8.asc 0000644 00000000662 15262675530 0017311 0 ustar 00 DRACUT-PRE-MOUNT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-mount.service - runs the dracut hooks before /sysroot is mounted
SYNOPSIS
--------
dracut-pre-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks before the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-shutdown-onfailure.service 0000644 00000000465 15262675530 0020306 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Service executing upon dracut-shutdown failure to perform cleanup
Documentation=man:dracut-shutdown.service(8)
DefaultDependencies=no
[Service]
Type=oneshot
ExecStart=-/bin/rm /run/initramfs/shutdown
StandardError=null
modules.d/99fs-lib/module-setup.sh 0000755 00000003272 15262675530 0012775 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
return 0
}
echo_fs_helper() {
local dev=$1 fs=$2
case "$fs" in
xfs)
echo -n " xfs_db xfs_repair xfs_check xfs_metadump "
;;
ext?)
echo -n " e2fsck "
;;
jfs)
echo -n " jfs_fsck "
;;
reiserfs)
echo -n " reiserfsck "
;;
btrfs)
echo -n " btrfsck "
;;
esac
echo -n " fsck.$fs "
return 0
}
include_fs_helper_modules() {
local dev=$1 fs=$2
case "$fs" in
xfs|btrfs|ext4)
instmods crc32c
;;
f2fs)
instmods crc32
;;
esac
}
# called by dracut
installkernel() {
# xfs/btrfs/ext4 need crc32c, f2fs needs crc32
if [[ $hostonly ]]; then
for_each_host_dev_fs include_fs_helper_modules
:
else
instmods crc32c crc32
fi
}
# called by dracut
install() {
local _helpers
inst "$moddir/fs-lib.sh" "/lib/fs-lib.sh"
> ${initdir}/etc/fstab.empty
[[ "$nofscks" = "yes" ]] && return
if [[ "$fscks" = "${fscks#*[^ ]*}" ]]; then
_helpers="\
umount mount /sbin/fsck*
xfs_db xfs_check xfs_repair xfs_metadump
e2fsck jfs_fsck reiserfsck btrfsck
"
if [[ $hostonly ]]; then
_helpers="umount mount "
_helpers+=$(for_each_host_dev_fs echo_fs_helper)
fi
else
_helpers="$fscks"
fi
if [[ "$_helpers" == *e2fsck* ]] && [ -e /etc/e2fsck.conf ]; then
inst_simple /etc/e2fsck.conf
fi
inst_multiple -o $_helpers fsck
}
modules.d/99fs-lib/fs-lib.sh 0000755 00000014355 15262675530 0011532 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
fsck_ask_reboot() {
info "note - fsck suggests reboot, if you"
info "leave shell, booting will continue normally"
emergency_shell -n "(reboot ?)"
}
fsck_ask_err() {
warn "*** An error occurred during the file system check."
warn "*** Dropping you to a shell; the system will try"
warn "*** to mount the filesystem(s), when you leave the shell."
emergency_shell -n "(Repair filesystem)"
}
# inherits: _ret _drv _out
fsck_tail() {
[ $_ret -gt 0 ] && warn "$_drv returned with $_ret"
if [ $_ret -ge 4 ]; then
[ -n "$_out" ] && echo "$_out"|vwarn
fsck_ask_err
else
[ -n "$_out" ] && echo "$_out"|vinfo
[ $_ret -ge 2 ] && fsck_ask_reboot
fi
}
# note: this function sets _drv of the caller
fsck_able() {
case "$1" in
xfs)
# {
# type xfs_db &&
# type xfs_repair &&
# type xfs_check &&
# type mount &&
# type umount
# } >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_xfs" &&
# return 0
return 1
;;
ext?)
type e2fsck >/dev/null 2>&1 &&
_drv="fsck_drv_com e2fsck" &&
return 0
;;
f2fs)
type fsck.f2fs >/dev/null 2>&1 &&
_drv="fsck_drv_com fsck.f2fs" &&
return 0
;;
jfs)
type jfs_fsck >/dev/null 2>&1 &&
_drv="fsck_drv_com jfs_fsck" &&
return 0
;;
reiserfs)
type reiserfsck >/dev/null 2>&1 &&
_drv="fsck_drv_com reiserfsck" &&
return 0
;;
btrfs)
# type btrfsck >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_btrfs" &&
# return 0
return 1
;;
nfs*)
# nfs can be a nop, returning success
_drv=":" &&
return 0
;;
*)
type fsck >/dev/null 2>&1 &&
_drv="fsck_drv_std fsck" &&
return 0
;;
esac
return 1
}
# note: all drivers inherit: _drv _fop _dev
fsck_drv_xfs() {
# xfs fsck is not necessary... Either it mounts or not
return 0
}
fsck_drv_btrfs() {
# btrfs fsck is not necessary... Either it mounts or not
return 0
}
# common code for checkers that follow usual subset of options and return codes
fsck_drv_com() {
local _drv="$1"
local _ret
local _out
if ! strglobin "$_fop" "-[ynap]"; then
_fop="-a ${_fop}"
fi
info "issuing $_drv $_fop $_dev"
# we enforce non-interactive run, so $() is fine
_out=$($_drv $_fop "$_dev")
_ret=$?
fsck_tail
return $_ret
}
# code for generic fsck, if the filesystem checked is "unknown" to us
fsck_drv_std() {
local _ret
local _out
unset _out
info "issuing fsck $_fop $_dev"
# note, we don't enforce -a here, thus fsck is being run (in theory)
# interactively; otherwise some tool might complain about lack of terminal
# (and using -a might not be safe)
fsck $_fop "$_dev" >/dev/console 2>&1
_ret=$?
fsck_tail
return $_ret
}
# checks single filesystem, relying on specific "driver"; we don't rely on
# automatic checking based on fstab, so empty one is passed;
# takes 4 arguments - device, filesystem, filesystem options, additional fsck options;
# first 2 arguments are mandatory (fs may be auto or "")
# returns 255 if filesystem wasn't checked at all (e.g. due to lack of
# necessary tools or insufficient options)
fsck_single() {
local FSTAB_FILE=/etc/fstab.empty
local _dev="$1"
local _fs="${2:-auto}"
local _fsopts="$3"
local _fop="$4"
local _drv
[ $# -lt 2 ] && return 255
# if UUID= marks more than one device, take only the first one
[ -e "$_dev" ] || _dev=$(devnames "$_dev"| while read line || [ -n "$line" ]; do if [ -n "$line" ]; then echo $line; break;fi;done)
[ -e "$_dev" ] || return 255
_fs=$(det_fs "$_dev" "$_fs")
fsck_able "$_fs" || return 255
info "Checking $_fs: $_dev"
export FSTAB_FILE
eval "$_drv"
return $?
}
# takes list of filesystems to check in parallel; we don't rely on automatic
# checking based on fstab, so empty one is passed
fsck_batch() {
local FSTAB_FILE=/etc/fstab.empty
local _drv=fsck
local _dev
local _ret
local _out
[ $# -eq 0 ] || ! type fsck >/dev/null 2>&1 && return 255
info "Checking filesystems (fsck -M -T -a):"
for _dev in "$@"; do
info " $_dev"
done
export FSTAB_FILE
_out="$(fsck -M -T "$@" -- -a)"
_ret=$?
fsck_tail
return $_ret
}
# verify supplied filesystem type:
# if user provided the fs and we couldn't find it, assume user is right
# if we found the fs, assume we're right
det_fs() {
local _dev="$1"
local _orig="${2:-auto}"
local _fs
_fs=$(udevadm info --query=env --name="$_dev" | \
while read line || [ -n "$line" ]; do
if str_starts $line "ID_FS_TYPE="; then
echo ${line#ID_FS_TYPE=}
break
fi
done)
_fs=${_fs:-auto}
if [ "$_fs" = "auto" ]; then
_fs="$_orig"
fi
echo "$_fs"
}
write_fs_tab() {
local _o
local _rw
local _root
local _rootfstype
local _rootflags
local _fspassno
_fspassno="0"
_root="$1"
_rootfstype="$2"
_rootflags="$3"
[ -z "$_rootfstype" ] && _rootfstype=$(getarg rootfstype=)
[ -z "$_rootflags" ] && _rootflags=$(getarg rootflags=)
[ -z "$_rootfstype" ] && _rootfstype="auto"
if [ -z "$_rootflags" ]; then
_rootflags="ro,x-initrd.mount"
else
_rootflags="ro,$_rootflags,x-initrd.mount"
fi
_rw=0
CMDLINE=$(getcmdline)
for _o in $CMDLINE; do
case $_o in
rw)
_rw=1;;
ro)
_rw=0;;
esac
done
if [ "$_rw" = "1" ]; then
_rootflags="$_rootflags,rw"
if ! getargbool 0 rd.skipfsck; then
_fspassno="1"
fi
fi
echo "$_root /sysroot $_rootfstype $_rootflags $_fspassno 0" >> /etc/fstab
if type systemctl >/dev/null 2>/dev/null; then
systemctl daemon-reload
systemctl --no-block start initrd-root-fs.target
fi
}
modules.d/95fstab-sys/module-setup.sh 0000755 00000000461 15262675530 0013525 0 ustar 00 #!/bin/bash
# called by dracut
check() {
test -f /etc/fstab.sys || [[ -n $add_fstab || -n $fstab_lines ]]
}
# called by dracut
depends() {
echo fs-lib
}
# called by dracut
install() {
[ -f /etc/fstab.sys ] && inst_simple /etc/fstab.sys
inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
}
modules.d/95fstab-sys/mount-sys.sh 0000755 00000002405 15262675530 0013060 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
fstab_mount() {
local _dev _mp _fs _opts _dump _pass _rest
test -e "$1" || return 1
info "Mounting from $1"
while read _dev _mp _fs _opts _dump _pass _rest || [ -n "$_dev" ]; do
[ -z "${_dev%%#*}" ] && continue # Skip comment lines
ismounted $_mp && continue # Skip mounted filesystem
if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then
fsck_single "$_dev" "$_fs" "$_opts"
fi
_fs=$(det_fs "$_dev" "$_fs")
info "Mounting $_dev"
if [ -d "$NEWROOT/$_mp" ]; then
mount -v -t $_fs -o $_opts $_dev "$NEWROOT/$_mp" 2>&1 | vinfo
else
[ -d "$_mp" ] || mkdir -p "$_mp"
mount -v -t $_fs -o $_opts $_dev $_mp 2>&1 | vinfo
fi
done < $1
return 0
}
# systemd will mount and run fsck from /etc/fstab and we don't want to
# run into a race condition.
if [ -z "$DRACUT_SYSTEMD" ]; then
[ -f /etc/fstab ] && fstab_mount /etc/fstab
fi
# prefer $NEWROOT/etc/fstab.sys over local /etc/fstab.sys
if [ -f $NEWROOT/etc/fstab.sys ]; then
fstab_mount $NEWROOT/etc/fstab.sys
elif [ -f /etc/fstab.sys ]; then
fstab_mount /etc/fstab.sys
fi
modules.d/99microcode_ctl-fw_dir_override/module-setup.sh 0000755 00000010022 15262675530 0017565 0 ustar 00 #!/bin/bash
# Hack in additional firmware directories for supported caveats.
#
# SPDX-License-Identifier: CC0-1.0
check() {
return 0
}
install() {
local FW_DIR=/lib/firmware
local DATA_DIR=/usr/share/microcode_ctl/ucode_with_caveats
local CFG_DIR="/etc/microcode_ctl/ucode_with_caveats"
local check_caveats=/usr/libexec/microcode_ctl/check_caveats
local fw_path_para=$(< /sys/module/firmware_class/parameters/path)
local verbose_opt
local cc_out
local path
local ignored
local do_skip_host_only
local p
verbose_opt=
[ 4 -gt "$stdloglvl" ] || verbose_opt="-v"
# HACK: we override external fw_dir variable in order to get
# an additional ucode based on the kernel version.
dinfo " microcode_ctl module: mangling fw_dir"
[ -z "$fw_dir_l" ] || {
dinfo " microcode_ctl: avoid touching fw_dir as" \
"it has been changed (fw_dir_l is '$fw_dir_l')"
return 0
}
# Reset fw_dir to avoid inclusion of kernel-version-specific directories
# populated with microcode for the late load, only in case it is set
# to the default value to avoid meddling with user-enforced changes.
# The second variant has been introduced in dracut-057~5.
[ \( "x$fw_dir" != \
"x/lib/firmware/updates /lib/firmware /lib/firmware/$kernel" \) -a \
\( "x$fw_dir" != \
"x${fw_path_para:+$fw_path_para }/lib/firmware/updates/$kernel /lib/firmware/updates /lib/firmware/$kernel /lib/firmware" \) ] || {
fw_dir="/lib/firmware/updates /lib/firmware"
dinfo " microcode_ctl: reset fw_dir to \"${fw_dir}\""
}
fw_dir_add=""
while read -d $'\n' -r i; do
dinfo " microcode_ctl: processing data directory " \
"\"$DATA_DIR/$i\"..."
if [ "x" != "x$hostonly" ]; then
do_skip_host_only=0
local sho_overrides="
$CFG_DIR/skip-host-only-check
$CFG_DIR/skip-host-only-check-$i
$FW_DIR/$kernel/skip-host-only-check
$FW_DIR/$kernel/skip-host-only-check-$i"
for p in $(echo "$sho_overrides"); do
[ -e "$p" ] || continue
do_skip_host_only=1
dinfo " microcode_ctl: $i; skipping" \
"Host-Only check, since \"$p\" exists."
break
done
else
do_skip_host_only=1
fi
match_model_opt=""
[ 1 = "$do_skip_host_only" ] || match_model_opt="-m"
if ! cc_out=$($check_caveats -e -k "$kernel" -c "$i" \
$verbose_opt $match_model_opt)
then
dinfo " microcode_ctl: kernel version \"$kernel\"" \
"failed early load check for \"$i\", skipping"
continue
fi
path=$(printf "%s" "$cc_out" | sed -n 's/^paths //p')
[ -n "$path" ] || {
ignored=$(printf "%s" "$cc_out" | \
sed -n 's/^skip_cfgs //p')
if [ -n "$ignored" ]; then
dinfo " microcode_ctl: configuration" \
"\"$i\" is ignored"
else
dinfo " microcode_ctl: no microcode paths" \
"are associated with \"$i\", skipping"
fi
continue
}
dinfo " microcode_ctl: $i: caveats check for kernel" \
"version \"$kernel\" passed, adding" \
"\"$DATA_DIR/$i\" to fw_dir variable"
if [ 0 -eq "$do_skip_host_only" ]; then
fw_dir_add="$DATA_DIR/$i "
else
fw_dir_add="$DATA_DIR/$i $fw_dir_add"
fi
# The list of directories is reverse-sorted in order to preserve the
# "last wins" policy in case of presence of multiple microcode
# revisions.
#
# In case of hostonly == 0, all microcode revisions will be included,
# but since the microcode search is done with the "first wins" policy
# by the (early) microcode loading code, the correct microcode revision
# still has to be picked.
#
# Note that dracut without patch [1] puts only the last directory
# in the early cpio; we try to address this by putting only the last
# matching caveat in the search path, but that workaround works only
# for host-only mode; non-host-only mode early cpio generation is still
# broken without that patch.
#
# [1] https://github.com/dracutdevs/dracut/commit/c44d2252bb4b
done <<-EOF
$(find "$DATA_DIR" -maxdepth 1 -mindepth 1 -type d -printf "%f\n" \
| LC_ALL=C sort)
EOF
fw_dir="${fw_dir_add}${fw_dir}"
dinfo " microcode_ctl: final fw_dir: \"${fw_dir}\""
}
modules.d/99shutdown/module-setup.sh 0000755 00000001111 15262675530 0013462 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo base
return 0
}
# called by dracut
install() {
local _d
inst_multiple umount poweroff reboot halt losetup stat sleep
inst_multiple -o kexec
inst "$moddir/shutdown.sh" "$prefix/shutdown"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
for _d in $hookdirs shutdown shutdown-emergency; do
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
done
}
modules.d/99shutdown/shutdown.sh 0000755 00000006066 15262675530 0012730 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2011, Red Hat, Inc.
# Harald Hoyer
ACTION="$1"
[ -w /dev/console ] && exec >/dev/console 2>>/dev/console
export TERM=linux
export PATH=/usr/sbin:/usr/bin:/sbin:/bin
. /lib/dracut-lib.sh
if [ "$(stat -c '%T' -f /)" = "tmpfs" ]; then
mount -o remount,rw /
fi
mkdir /oldsys
for i in sys proc run dev; do
mkdir /oldsys/$i
mount --move /oldroot/$i /oldsys/$i
done
# if "kexec" was installed after creating the initramfs, we try to copy it from the real root
# libz normally is pulled in via kmod/modprobe and udevadm
if [ "$ACTION" = "kexec" ] && ! command -v kexec >/dev/null 2>&1; then
for p in /usr/sbin /usr/bin /sbin /bin; do
cp -a /oldroot/${p}/kexec $p >/dev/null 2>&1 && break
done
hash kexec
fi
trap "emergency_shell --shutdown shutdown Signal caught!" 0
getarg 'rd.break=pre-shutdown' && emergency_shell --shutdown pre-shutdown "Break before pre-shutdown"
source_hook pre-shutdown
warn "Killing all remaining processes"
killall_proc_mountpoint /oldroot || sleep 0.2
umount_a() {
local _did_umount="n"
while read a mp a || [ -n "$mp" ]; do
if strstr "$mp" oldroot; then
if umount "$mp"; then
_did_umount="y"
warn "Unmounted $mp."
fi
fi
done /dev/null || break
_cnt=$(($_cnt+1))
done
[ $_cnt -ge 40 ] && umount_a
if strstr "$(cat /proc/mounts)" "/oldroot"; then
warn "Cannot umount /oldroot"
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ $_pid -eq $$ ] && continue
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l /proc/$_pid /proc/$_pid/fd 2>/dev/null)" "oldroot"; then
warn "Blocking umount of /oldroot [$_pid] $(cat /proc/$_pid/cmdline)"
else
warn "Still running [$_pid] $(cat /proc/$_pid/cmdline)"
fi
ls -l "/proc/$_pid/exe" 2>&1 | vwarn
ls -l "/proc/$_pid/fd" 2>&1 | vwarn
done
fi
_check_shutdown() {
local __f
local __s=0
for __f in $hookdir/shutdown/*.sh; do
[ -e "$__f" ] || continue
( . "$__f" $1 )
if [ $? -eq 0 ]; then
rm -f -- $__f
else
__s=1
fi
done
return $__s
}
_cnt=0
while [ $_cnt -le 40 ]; do
_check_shutdown && break
_cnt=$(($_cnt+1))
done
[ $_cnt -ge 40 ] && _check_shutdown final
getarg 'rd.break=shutdown' && emergency_shell --shutdown shutdown "Break before shutdown"
case "$ACTION" in
reboot|poweroff|halt)
$ACTION -f -d -n
warn "$ACTION failed!"
;;
kexec)
kexec -e
warn "$ACTION failed!"
reboot -f -d -n
;;
*)
warn "Shutdown called with argument '$ACTION'. Rebooting!"
reboot -f -d -n
;;
esac
emergency_shell --shutdown shutdown
modules.d/90kernel-modules/module-setup.sh 0000755 00000007351 15262675530 0014540 0 ustar 00 #!/bin/bash
# called by dracut
installkernel() {
local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_add_host|scsi_add_host_with_dma'
find_kernel_modules_external () {
local _OLDIFS
local external_pattern="^/"
[[ -f "$srcmods/modules.dep" ]] || return 0
_OLDIFS=$IFS
IFS=:
while read a rest; do
[[ $a =~ $external_pattern ]] || continue
printf "%s\n" "$a"
done < "$srcmods/modules.dep"
IFS=$_OLDIFS
}
is_block_dev() {
[ -e /sys/dev/block/$1 ] && return 0
return 1
}
install_block_modules () {
hostonly='' instmods sr_mod sd_mod scsi_dh ata_piix
instmods \
scsi_dh_rdac scsi_dh_emc scsi_dh_alua \
=ide nvme vmd nfit \
virtio_blk
dracut_instmods -o -s "${_blockfuncs}" "=drivers"
}
if [[ -z $drivers ]]; then
hostonly='' instmods \
hid_generic unix \
ehci-hcd ehci-pci ehci-platform \
ohci-hcd ohci-pci \
uhci-hcd \
xhci-hcd xhci-pci xhci-plat-hcd \
"=drivers/pinctrl" \
${NULL}
hostonly=$(optional_hostonly) instmods \
"=drivers/hid" \
"=drivers/tty/serial" \
"=drivers/input/serio" \
"=drivers/input/keyboard" \
"=drivers/usb/storage" \
"=drivers/pci/host" \
${NULL}
instmods \
yenta_socket \
atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus \
virtio virtio_ring virtio_pci virtio_scsi pci_hyperv \
"=drivers/pcmcia"
if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then
# arm/aarch64 specific modules
_blockfuncs+='|dw_mc_probe|dw_mci_pltfm_register'
instmods \
"=drivers/clk" \
"=drivers/dma" \
"=drivers/extcon" \
"=drivers/gpio" \
"=drivers/hwspinlock" \
"=drivers/i2c/busses" \
"=drivers/mfd" \
"=drivers/mmc/core" \
"=drivers/phy" \
"=drivers/power" \
"=drivers/regulator" \
"=drivers/rpmsg" \
"=drivers/rtc" \
"=drivers/soc" \
"=drivers/usb/chipidea" \
"=drivers/usb/dwc2" \
"=drivers/usb/dwc3" \
"=drivers/usb/host" \
"=drivers/usb/misc" \
"=drivers/usb/musb" \
"=drivers/usb/phy" \
"=drivers/scsi/hisi_sas" \
${NULL}
fi
find_kernel_modules_external | instmods
if ! [[ $hostonly ]] || for_each_host_dev_and_slaves is_block_dev; then
install_block_modules
fi
# if not on hostonly mode, install all known filesystems,
# if the required list is not set via the filesystems variable
if ! [[ $hostonly ]]; then
if [[ -z $filesystems ]]; then
dracut_instmods -o -P ".*/(kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd)/.*" '=fs'
fi
elif [[ "${host_fs_types[*]}" ]]; then
hostonly='' instmods "${host_fs_types[@]}"
fi
fi
:
}
# called by dracut
install() {
inst_multiple -o /lib/modprobe.d/*.conf
[[ $hostonly ]] && inst_multiple -H -o /etc/modprobe.d/*.conf /etc/modprobe.conf
if ! dracut_module_included "systemd"; then
inst_hook cmdline 01 "$moddir/parse-kernel.sh"
fi
inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
}
modules.d/90kernel-modules/insmodpost.sh 0000755 00000000301 15262675530 0014300 0 ustar 00 #!/bin/sh
. /lib/dracut-lib.sh
for modlist in $(getargs rd.driver.post -d rdinsmodpost=); do
(
IFS=,
for m in $modlist; do
modprobe $m
done
)
done
modules.d/90kernel-modules/parse-kernel.sh 0000755 00000001631 15262675530 0014500 0 ustar 00 #!/bin/sh
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
modules.d/98pollcdrom/module-setup.sh 0000755 00000000307 15262675530 0013607 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_hook initqueue/settled 99 "$moddir/pollcdrom.sh"
}
modules.d/98pollcdrom/pollcdrom.sh 0000755 00000001173 15262675530 0013161 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2012, Red Hat, Inc.
# Harald Hoyer
if [ ! -e /sys/module/block/parameters/events_dfl_poll_msecs ]; then
# if the kernel does not support autopolling
# then we have to do a
# dirty hack for some cdrom drives,
# which report no medium for quiet
# some time.
for cdrom in /sys/block/sr*; do
[ -e "$cdrom" ] || continue
# skip, if cdrom medium was already found
strstr "$(udevadm info --query=env --path=${cdrom##/sys})" \
ID_CDROM_MEDIA && continue
echo change > "$cdrom/uevent"
done
fi
modules.d/90dmsquash-live-ntfs/module-setup.sh 0000755 00000000454 15262675530 0015341 0 ustar 00 #!/bin/bash
command -v
check() {
require_binaries ntfs-3g || return 1
return 255
}
depends() {
echo dmsquash-live
return 0
}
install() {
inst_multiple fusermount ulockmgr_server mount.fuse ntfs-3g
dracut_need_initqueue
}
installkernel() {
hostonly='' instmods fuse
}
modules.d/00systemd/module-setup.sh 0000755 00000022232 15262675530 0013264 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if require_binaries $systemdutildir/systemd; then
SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
(( $SYSTEMD_VERSION >= 198 )) && return 0
return 255
fi
return 1
}
# called by dracut
depends() {
return 0
}
installkernel() {
hostonly='' instmods autofs4 ipv6 algif_hash hmac sha256 sg
instmods -s efivarfs
}
# called by dracut
install() {
local _mods
if [[ "$prefix" == /run/* ]]; then
dfatal "systemd does not work with a prefix, which contains \"/run\"!!"
exit 1
fi
inst_multiple -o \
$systemdutildir/system-generators/systemd-debug-generator \
$systemdsystemunitdir/debug-shell.service
inst_multiple -o \
$systemdutildir/systemd \
$systemdutildir/systemd-coredump \
$systemdutildir/systemd-cgroups-agent \
$systemdutildir/systemd-shutdown \
$systemdutildir/systemd-reply-password \
$systemdutildir/systemd-fsck \
$systemdutildir/systemd-udevd \
$systemdutildir/systemd-journald \
$systemdutildir/systemd-sysctl \
$systemdutildir/systemd-modules-load \
$systemdutildir/systemd-vconsole-setup \
$systemdutildir/systemd-sysroot-fstab-check \
$systemdutildir/system-generators/systemd-fstab-generator \
$systemdutildir/system-generators/systemd-gpt-auto-generator \
\
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/emergency.target \
$systemdsystemunitdir/sysinit.target \
$systemdsystemunitdir/basic.target \
$systemdsystemunitdir/halt.target \
$systemdsystemunitdir/kexec.target \
$systemdsystemunitdir/local-fs.target \
$systemdsystemunitdir/local-fs-pre.target \
$systemdsystemunitdir/remote-fs.target \
$systemdsystemunitdir/remote-fs-pre.target \
$systemdsystemunitdir/multi-user.target \
$systemdsystemunitdir/network.target \
$systemdsystemunitdir/network-pre.target \
$systemdsystemunitdir/network-online.target \
$systemdsystemunitdir/nss-lookup.target \
$systemdsystemunitdir/nss-user-lookup.target \
$systemdsystemunitdir/poweroff.target \
$systemdsystemunitdir/reboot.target \
$systemdsystemunitdir/rescue.target \
$systemdsystemunitdir/rpcbind.target \
$systemdsystemunitdir/shutdown.target \
$systemdsystemunitdir/final.target \
$systemdsystemunitdir/sigpwr.target \
$systemdsystemunitdir/sockets.target \
$systemdsystemunitdir/swap.target \
$systemdsystemunitdir/timers.target \
$systemdsystemunitdir/paths.target \
$systemdsystemunitdir/umount.target \
\
$systemdsystemunitdir/sys-kernel-config.mount \
\
$systemdsystemunitdir/kmod-static-nodes.service \
$systemdsystemunitdir/systemd-tmpfiles-setup.service \
$systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-udevd-control.socket \
$systemdsystemunitdir/systemd-udevd-kernel.socket \
$systemdsystemunitdir/systemd-ask-password-plymouth.path \
$systemdsystemunitdir/systemd-journald.socket \
$systemdsystemunitdir/systemd-journald-audit.socket \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/systemd-modules-load.service \
$systemdsystemunitdir/systemd-halt.service \
$systemdsystemunitdir/systemd-poweroff.service \
$systemdsystemunitdir/systemd-reboot.service \
$systemdsystemunitdir/systemd-kexec.service \
$systemdsystemunitdir/systemd-fsck@.service \
$systemdsystemunitdir/systemd-udevd.service \
$systemdsystemunitdir/systemd-udev-trigger.service \
$systemdsystemunitdir/systemd-udev-settle.service \
$systemdsystemunitdir/systemd-ask-password-plymouth.service \
$systemdsystemunitdir/systemd-journald.service \
$systemdsystemunitdir/systemd-vconsole-setup.service \
$systemdsystemunitdir/systemd-random-seed-load.service \
$systemdsystemunitdir/systemd-random-seed.service \
$systemdsystemunitdir/systemd-sysctl.service \
\
$systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
$systemdsystemunitdir/sysinit.target.wants/systemd-journald.service \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
$systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
$systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
\
$systemdsystemunitdir/ctrl-alt-del.target \
$systemdsystemunitdir/reboot.target \
$systemdsystemunitdir/systemd-reboot.service \
$systemdsystemunitdir/syslog.socket \
\
$systemdsystemunitdir/slices.target \
$systemdsystemunitdir/system.slice \
$systemdsystemunitdir/-.slice \
\
$tmpfilesdir/systemd.conf \
\
journalctl systemctl \
echo swapoff \
kmod insmod rmmod modprobe modinfo depmod lsmod \
mount umount reboot poweroff \
systemd-run systemd-escape \
systemd-cgls systemd-tmpfiles \
/etc/udev/udev.hwdb \
${NULL}
inst_multiple -o \
/usr/lib/modules-load.d/*.conf \
/usr/lib/sysctl.d/*.conf
modules_load_get() {
local _line i
for i in "$1"/*.conf; do
[[ -f $i ]] || continue
while read _line || [ -n "$_line" ]; do
case $_line in
\#*)
;;
\;*)
;;
*)
echo $_line
esac
done < "$i"
done
}
_mods=$(modules_load_get /usr/lib/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
if [[ $hostonly ]]; then
inst_multiple -H -o \
/etc/systemd/journald.conf \
/etc/systemd/journald.conf.d/*.conf \
/etc/systemd/system.conf \
/etc/systemd/system.conf.d/*.conf \
/etc/hostname \
/etc/machine-id \
/etc/machine-info \
/etc/vconsole.conf \
/etc/locale.conf \
/etc/modules-load.d/*.conf \
/etc/sysctl.d/*.conf \
/etc/sysctl.conf \
/etc/udev/udev.conf \
${NULL}
_mods=$(modules_load_get /etc/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
fi
if ! [[ -e "$initdir/etc/machine-id" ]]; then
> "$initdir/etc/machine-id"
fi
# install adm user/group for journald
inst_multiple nologin
grep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
grep '^wheel:' /etc/group >> "$initdir/etc/group"
grep '^adm:' /etc/group >> "$initdir/etc/group"
grep '^utmp:' /etc/group >> "$initdir/etc/group"
grep '^root:' /etc/group >> "$initdir/etc/group"
# we don't use systemd-networkd, but the user is in systemd.conf tmpfiles snippet
grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^systemd-network:' /etc/group >> "$initdir/etc/group"
ln_r $systemdutildir/systemd "/init"
ln_r $systemdutildir/systemd "/sbin/init"
inst_binary true
ln_r $(find_binary true) "/usr/bin/loginctl"
ln_r $(find_binary true) "/bin/loginctl"
inst_rules \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
90-vconsole.rules \
99-systemd.rules \
${NULL}
for i in \
emergency.target \
rescue.target \
systemd-ask-password-console.service \
systemd-ask-password-plymouth.service \
; do
systemctl -q --root "$initdir" add-wants "$i" systemd-vconsole-setup.service 2>/dev/null
done
mkdir -p "$initdir/etc/systemd"
# We must use a volatile journal, and we don't want rate-limiting
{
echo "[Journal]"
echo "Storage=volatile"
echo "RateLimitInterval=0"
echo "RateLimitBurst=0"
} >> "$initdir/etc/systemd/journald.conf"
systemctl -q --root "$initdir" set-default multi-user.target
}
modules.d/99squash/module-setup.sh 0000644 00000004114 15262675530 0013116 0 ustar 00 #!/bin/bash
check() {
require_binaries mksquashfs unsquashfs || return 1
for i in CONFIG_SQUASHFS CONFIG_BLK_DEV_LOOP CONFIG_OVERLAY_FS ; do
if ! check_kernel_config $i; then
dinfo "dracut-squash module requires kernel configuration $i (y or m)"
return 1
fi
done
return 255
}
depends() {
echo "systemd-initrd"
return 0
}
installpost() {
local _busybox
_busybox=$(find_binary busybox)
# Move everything under $initdir except $squash_dir
# itself into squash image
for i in "$initdir"/*; do
[[ "$squash_dir" == "$i"/* ]] || mv "$i" "$squash_dir"/
done
# Create mount points for squash loader
mkdir -p "$initdir"/squash/
mkdir -p "$squash_dir"/squash/
# Copy dracut spec files out side of the squash image
# so dracut rebuild and lsinitrd can work
mkdir -p "$initdir/usr/lib/dracut/"
for file in "$squash_dir"/usr/lib/dracut/*; do
[[ -f $file ]] || continue
cp "$file" "$initdir/${file#$squash_dir}"
done
# Install required modules and binaries for the squash image init script.
if [[ $_busybox ]]; then
inst "$_busybox" /usr/bin/busybox
for _i in sh echo mount modprobe mkdir switch_root grep umount; do
ln_r /usr/bin/busybox /usr/bin/$_i
done
else
DRACUT_RESOLVE_DEPS=1 inst_multiple sh mount modprobe mkdir switch_root grep umount
# libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so
inst_libdir_file -o "libgcc_s.so*"
# FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled
[[ $DRACUT_FIPS_MODE ]] && inst_libdir_file -o "libssl.so*"
fi
hostonly="" instmods "loop" "squashfs" "overlay"
dracut_kernel_post
# Install squash image init script.
ln_r /usr/bin /bin
ln_r /usr/sbin /sbin
inst_simple "$moddir"/init-squash.sh /init
# make sure that library links are correct and up to date for squash loader
build_ld_cache
}
install() {
if [[ $DRACUT_SQUASH_POST_INST ]]; then
installpost
fi
}
modules.d/99squash/init-squash.sh 0000755 00000002176 15262675530 0012751 0 ustar 00 #!/bin/sh
PATH=/bin:/sbin
[ -e /proc/self/mounts ] \
|| (mkdir -p /proc && mount -t proc -o nosuid,noexec,nodev proc /proc)
grep -q '^sysfs /sys sysfs' /proc/self/mounts \
|| (mkdir -p /sys && mount -t sysfs -o nosuid,noexec,nodev sysfs /sys)
grep -q '^devtmpfs /dev devtmpfs' /proc/self/mounts \
|| (mkdir -p /dev && mount -t devtmpfs -o mode=755,noexec,nosuid,strictatime devtmpfs /dev)
grep -q '^tmpfs /run tmpfs' /proc/self/mounts \
|| (mkdir -p /run && mount -t tmpfs -o mode=755,noexec,nosuid,strictatime tmpfs /run)
# Load required modules
modprobe loop
modprobe squashfs
modprobe overlay
# Mount the squash image
mount -t ramfs ramfs /squash
mkdir -p /squash/root /squash/overlay/upper /squash/overlay/work
mount -t squashfs -o ro,loop /squash-root.img /squash/root
# Setup new root overlay
mkdir /newroot
mount -t overlay overlay -o lowerdir=/squash/root,upperdir=/squash/overlay/upper,workdir=/squash/overlay/work/ /newroot/
# Move all mount points to new root to prepare chroot
mount --move /squash /newroot/squash
# Jump to new root and clean setup files
SYSTEMD_IN_INITRD=lenient exec switch_root /newroot /init
modules.d/99squash/.shchkdir 0000644 00000000000 15262675530 0011725 0 ustar 00 modules.d/90dmsquash-live/module-setup.sh 0000755 00000002377 15262675530 0014377 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# a live host-only image doesn't really make a lot of sense
[[ $hostonly ]] && return 1
return 255
}
# called by dracut
depends() {
# if dmsetup is not installed, then we cannot support fedora/red hat
# style live images
echo dm rootfs-block img-lib
return 0
}
# called by dracut
installkernel() {
instmods squashfs loop iso9660 overlay
}
# called by dracut
install() {
inst_multiple umount dmsetup blkid dd losetup blockdev find
inst_multiple -o checkisomd5
inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
inst_hook pre-udev 30 "$moddir/dmsquash-liveiso-genrules.sh"
inst_hook pre-pivot 20 "$moddir/apply-live-updates.sh"
inst_script "$moddir/dmsquash-live-root.sh" "/sbin/dmsquash-live-root"
inst_script "$moddir/iso-scan.sh" "/sbin/iso-scan"
inst_script "$moddir/dmsquash-generator.sh" $systemdutildir/system-generators/dracut-dmsquash-generator
# should probably just be generally included
inst_rules 60-cdrom_id.rules
inst_simple "$moddir/checkisomd5@.service" "/etc/systemd/system/checkisomd5@.service"
dracut_need_initqueue
}
modules.d/90dmsquash-live/checkisomd5@.service 0000644 00000000414 15262675530 0015263 0 ustar 00 [Unit]
Description=Media check on %f
DefaultDependencies=no
Before=shutdown.target
[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/checkisomd5 --verbose %f
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
TimeoutSec=0
SuccessExitStatus=2
modules.d/90dmsquash-live/dmsquash-live-genrules.sh 0000755 00000001157 15262675530 0016353 0 ustar 00 #!/bin/sh
case "$root" in
live:/dev/*)
{
printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root %s"\n' \
"${root#live:/dev/}" "${root#live:}"
printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root %s"\n' \
"${root#live:/dev/}" "${root#live:}"
} >> /etc/udev/rules.d/99-live-squash.rules
wait_for_dev -n "${root#live:}"
;;
live:*)
if [ -f "${root#live:}" ]; then
/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root "${root#live:}"
fi
;;
esac
modules.d/90dmsquash-live/dmsquash-generator.sh 0000755 00000005236 15262675530 0015562 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -z "$root" ] && root=$(getarg root=)
# support legacy syntax of passing liveimg and then just the base root
if getargbool 0 rd.live.image -d -y liveimg; then
liveroot="live:$root"
fi
if [ "${root%%:*}" = "live" ] ; then
liveroot=$root
fi
[ "${liveroot%%:*}" = "live" ] || exit 0
case "$liveroot" in
live:LABEL=*|LABEL=*) \
root="${root#live:}"
root="${root//\//\\x2f}"
root="live:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
live:CDLABEL=*|CDLABEL=*) \
root="${root#live:}"
root="${root//\//\\x2f}"
root="live:/dev/disk/by-label/${root#CDLABEL=}"
rootok=1 ;;
live:UUID=*|UUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
live:PARTUUID=*|PARTUUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
live:PARTLABEL=*|PARTLABEL=*) \
root="${root#live:}"
root="live:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
live:/*.[Ii][Ss][Oo]|/*.[Ii][Ss][Oo])
root="${root#live:}"
root="liveiso:${root}"
rootok=1 ;;
live:/dev/*)
rootok=1 ;;
live:/*.[Ii][Mm][Gg]|/*.[Ii][Mm][Gg])
[ -f "${root#live:}" ] && rootok=1 ;;
esac
[ "$rootok" != "1" ] && exit 0
GENERATOR_DIR="$2"
[ -z "$GENERATOR_DIR" ] && exit 1
[ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR"
getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
getargbool 0 rd.live.overlay.overlayfs && overlayfs="yes"
[ -e /xor_overlayfs ] && xor_overlayfs="yes"
[ -e /xor_readonly ] && xor_readonly="--readonly"
ROOTFLAGS="$(getarg rootflags)"
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "[Mount]"
echo "Where=/sysroot"
if [ "$overlayfs$xor_overlayfs" = "yes" ]; then
echo "What=LiveOS_rootfs"
if [ "$readonly_overlay$xor_readonly" = "--readonly" ]; then
ovlfs=lowerdir=/run/overlayfs-r:/run/rootfsbase
else
ovlfs=lowerdir=/run/rootfsbase
fi
echo "Options=${ROOTFLAGS},${ovlfs},upperdir=/run/overlayfs,workdir=/run/ovlwork"
echo "Type=overlay"
_dev=LiveOS_rootfs
else
echo "What=/dev/mapper/live-rw"
[ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}"
_dev=$'dev-mapper-live\\x2drw'
fi
} > "$GENERATOR_DIR"/sysroot.mount
mkdir -p "$GENERATOR_DIR/$_dev.device.d"
{
echo "[Unit]"
echo "JobTimeoutSec=3000"
echo "JobRunningTimeoutSec=3000"
} > "$GENERATOR_DIR/$_dev.device.d/timeout.conf"
modules.d/90dmsquash-live/parse-dmsquash-live.sh 0000755 00000003060 15262675530 0015634 0 ustar 00 #!/bin/sh
# live images are specified with
# root=live:backingdev
[ -z "$root" ] && root=$(getarg root=)
# support legacy syntax of passing liveimg and then just the base root
if getargbool 0 rd.live.image -d -y liveimg; then
liveroot="live:$root"
fi
if [ "${root%%:*}" = "live" ] ; then
liveroot=$root
fi
[ "${liveroot%%:*}" = "live" ] || return 1
modprobe -q loop
case "$liveroot" in
live:LABEL=*|LABEL=*) \
root="${root#live:}"
root="${root//\//\\x2f}"
root="live:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
live:CDLABEL=*|CDLABEL=*) \
root="${root#live:}"
root="${root//\//\\x2f}"
root="live:/dev/disk/by-label/${root#CDLABEL=}"
rootok=1 ;;
live:UUID=*|UUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
live:PARTUUID=*|PARTUUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
live:PARTLABEL=*|PARTLABEL=*) \
root="${root#live:}"
root="live:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
live:/*.[Ii][Ss][Oo]|/*.[Ii][Ss][Oo])
root="${root#live:}"
root="liveiso:${root}"
rootok=1 ;;
live:/dev/*)
rootok=1 ;;
live:/*.[Ii][Mm][Gg]|/*.[Ii][Mm][Gg])
[ -f "${root#live:}" ] && rootok=1 ;;
esac
[ "$rootok" = "1" ] || return 1
info "root was $liveroot, is now $root"
# make sure that init doesn't complain
[ -z "$root" ] && root="live"
wait_for_dev -n /dev/root
return 0
modules.d/90dmsquash-live/parse-iso-scan.sh 0000755 00000000307 15262675530 0014567 0 ustar 00 #!/bin/sh
# live images are specified with
# root=live:backingdev
isofile=$(getarg iso-scan/filename)
if [ -n "$isofile" ]; then
/sbin/initqueue --settled --unique /sbin/iso-scan "$isofile"
fi
modules.d/90dmsquash-live/iso-scan.sh 0000755 00000001427 15262675530 0013463 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
isofile=$1
[ -z "$isofile" ] && exit 1
ismounted "/run/initramfs/isoscan" && exit 0
mkdir -p "/run/initramfs/isoscan"
do_iso_scan() {
local _name
local dev
for dev in /dev/disk/by-uuid/*; do
_name=$(dev_unit_name "$dev")
[ -e /tmp/isoscan-${_name} ] && continue
> /tmp/isoscan-${_name}
mount -t auto -o ro "$dev" "/run/initramfs/isoscan" || continue
if [ -f "/run/initramfs/isoscan/$isofile" ]; then
losetup -f "/run/initramfs/isoscan/$isofile"
rm -f -- "$job"
exit 0
else
umount "/run/initramfs/isoscan"
fi
done
}
do_iso_scan
rmdir "/run/initramfs/isoscan"
exit 1
modules.d/90dmsquash-live/dmsquash-liveiso-genrules.sh 0000755 00000000441 15262675530 0017061 0 ustar 00 #!/bin/sh
if [ "${root%%:*}" = "liveiso" ]; then
{
printf 'KERNEL=="loop-control", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
${root#liveiso:}
} >> /etc/udev/rules.d/99-liveiso-mount.rules
fi
modules.d/90dmsquash-live/apply-live-updates.sh 0000755 00000001201 15262675530 0015462 0 ustar 00 #!/bin/sh
if [ -h /dev/root ] && [ -d /run/initramfs/live/updates -o -d /updates ]; then
info "Applying updates to live image..."
mount -o bind /run $NEWROOT/run
# avoid overwriting symlinks (e.g. /lib -> /usr/lib) with directories
for d in /updates /run/initramfs/live/updates; do
[ -d "$d" ] || continue
(
cd $d
find . -depth -type d | while read dir; do
mkdir -p "$NEWROOT/$dir"
done
find . -depth \! -type d | while read file; do
cp -a "$file" "$NEWROOT/$file"
done
)
done
umount $NEWROOT/run
fi
modules.d/90dmsquash-live/dmsquash-live-root.sh 0000755 00000037407 15262675530 0015521 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
command -v unpack_archive >/dev/null || . /lib/img-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
if getargbool 0 rd.live.debug -n -y rdlivedebug; then
exec > /tmp/liveroot.$$.out
exec 2>> /tmp/liveroot.$$.out
set -x
fi
[ -z "$1" ] && exit 1
livedev="$1"
# parse various live image specific options that make sense to be
# specified as their own things
live_dir=$(getarg rd.live.dir -d live_dir)
[ -z "$live_dir" ] && live_dir="LiveOS"
squash_image=$(getarg rd.live.squashimg)
[ -z "$squash_image" ] && squash_image="squashfs.img"
getargbool 0 rd.live.ram -d -y live_ram && live_ram="yes"
getargbool 0 rd.live.overlay.reset -d -y reset_overlay && reset_overlay="yes"
getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
overlay=$(getarg rd.live.overlay -d overlay)
getargbool 0 rd.writable.fsimg -d -y writable_fsimg && writable_fsimg="yes"
overlay_size=$(getarg rd.live.overlay.size=)
[ -z "$overlay_size" ] && overlay_size=32768
getargbool 0 rd.live.overlay.thin && thin_snapshot="yes"
getargbool 0 rd.live.overlay.overlayfs && overlayfs="yes"
# CD/DVD media check
[ -b $livedev ] && fs=$(blkid -s TYPE -o value $livedev)
if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
check="yes"
fi
getarg rd.live.check -d check || check=""
if [ -n "$check" ]; then
type plymouth >/dev/null 2>&1 && plymouth --hide-splash
if [ -n "$DRACUT_SYSTEMD" ]; then
p=$(dev_unit_name "$livedev")
systemctl start checkisomd5@${p}.service
else
checkisomd5 --verbose $livedev
fi
if [ $? -eq 1 ]; then
die "CD check failed!"
exit 1
fi
type plymouth >/dev/null 2>&1 && plymouth --show-splash
fi
ln -s $livedev /run/initramfs/livedev
# determine filesystem type for a filesystem image
det_img_fs() {
udevadm settle >&2
blkid -s TYPE -u noraid -o value "$1"
}
modprobe squashfs
CMDLINE=$(getcmdline)
for arg in $CMDLINE; do case $arg in ro|rw) liverw=$arg ;; esac; done
# mount the backing of the live image first
mkdir -m 0755 -p /run/initramfs/live
if [ -f $livedev ]; then
# no mount needed - we've already got the LiveOS image in initramfs
# check filesystem type and handle accordingly
fstype=$(det_img_fs $livedev)
case $fstype in
squashfs) SQUASHED=$livedev;;
auto) die "cannot mount live image (unknown filesystem type)" ;;
*) FSIMG=$livedev ;;
esac
[ -e /sys/fs/$fstype ] || modprobe $fstype
else
if [ "$(blkid -o value -s TYPE $livedev)" != "ntfs" ]; then
mount -n -t $fstype -o ${liverw:-ro} $livedev /run/initramfs/live
else
# Symlinking /usr/bin/ntfs-3g as /sbin/mount.ntfs seems to boot
# at the first glance, but ends with lots and lots of squashfs
# errors, because systemd attempts to kill the ntfs-3g process?!
if [ -x "/usr/bin/ntfs-3g" ]; then
( exec -a @ntfs-3g ntfs-3g -o ${liverw:-ro} $livedev /run/initramfs/live ) | vwarn
else
die "Failed to mount block device of live image: Missing NTFS support"
exit 1
fi
fi
if [ "$?" != "0" ]; then
die "Failed to mount block device of live image"
exit 1
fi
fi
# overlay setup helper function
do_live_overlay() {
# create a sparse file for the overlay
# overlay: if non-ram overlay searching is desired, do it,
# otherwise, create traditional overlay in ram
l=$(blkid -s LABEL -o value $livedev) || l=""
u=$(blkid -s UUID -o value $livedev) || u=""
if [ -z "$overlay" ]; then
pathspec="/${live_dir}/overlay-$l-$u"
elif strstr $overlay ":"; then
# pathspec specified, extract
pathspec=${overlay##*:}
fi
if [ -z "$pathspec" -o "$pathspec" = "auto" ]; then
pathspec="/${live_dir}/overlay-$l-$u"
fi
devspec=${overlay%%:*}
# need to know where to look for the overlay
if [ -z "$setup" -a -n "$devspec" -a -n "$pathspec" -a -n "$overlay" ]; then
mkdir -m 0755 /run/initramfs/overlayfs
opt=''
[ -n "$readonly_overlay" ] && opt=-r
mount -n -t auto $devspec /run/initramfs/overlayfs || :
if [ -f /run/initramfs/overlayfs$pathspec -a -w /run/initramfs/overlayfs$pathspec ]; then
OVERLAY_LOOPDEV=$(losetup -f --show $opt /run/initramfs/overlayfs$pathspec)
over=$OVERLAY_LOOPDEV
umount -l /run/initramfs/overlayfs || :
oltype=$(det_img_fs $OVERLAY_LOOPDEV)
if [ -z "$oltype" ] || [ "$oltype" = DM_snapshot_cow ]; then
if [ -n "$reset_overlay" ]; then
info "Resetting the Device-mapper overlay."
dd if=/dev/zero of=$OVERLAY_LOOPDEV bs=64k count=1 conv=fsync 2>/dev/null
fi
if [ -n "$overlayfs" ]; then
unset -v overlayfs
[ -n "$DRACUT_SYSTEMD" ] && reloadsysrootmountunit=":>/xor_overlayfs;"
fi
setup="yes"
else
mount -n -t $oltype $opt $OVERLAY_LOOPDEV /run/initramfs/overlayfs
if [ -d /run/initramfs/overlayfs/overlayfs ] &&
[ -d /run/initramfs/overlayfs/ovlwork ]; then
ln -s /run/initramfs/overlayfs/overlayfs /run/overlayfs$opt
ln -s /run/initramfs/overlayfs/ovlwork /run/ovlwork$opt
if [ -z "$overlayfs" ] && [ -n "$DRACUT_SYSTEMD" ]; then
reloadsysrootmountunit=":>/xor_overlayfs;"
fi
overlayfs="required"
setup="yes"
fi
fi
elif [ -d /run/initramfs/overlayfs$pathspec ] &&
[ -d /run/initramfs/overlayfs$pathspec/../ovlwork ]; then
ln -s /run/initramfs/overlayfs$pathspec /run/overlayfs$opt
ln -s /run/initramfs/overlayfs$pathspec/../ovlwork /run/ovlwork$opt
if [ -z "$overlayfs" ] && [ -n "$DRACUT_SYSTEMD" ]; then
reloadsysrootmountunit=":>/xor_overlayfs;"
fi
overlayfs="required"
setup="yes"
fi
fi
if [ -n "$overlayfs" ]; then
modprobe overlay
if [ $? != 0 ]; then
if [ "$overlayfs" = required ]; then
die "OverlayFS is required but not available."
exit 1
fi
[ -n "$DRACUT_SYSTEMD" ] && reloadsysrootmountunit=":>/xor_overlayfs;"
m='OverlayFS is not available; using temporary Device-mapper overlay.'
info $m
unset -v overlayfs setup
fi
fi
if [ -z "$setup" -o -n "$readonly_overlay" ]; then
if [ -n "$setup" ]; then
warn "Using temporary overlay."
elif [ -n "$devspec" -a -n "$pathspec" ]; then
[ -z "$m" ] &&
m=' Unable to find a persistent overlay; using a temporary one.'
m="$m"$'\n All root filesystem changes will be lost on shutdown.'
m="$m"$'\n Press [Enter] to continue.'
printf "\n\n\n\n${m}\n\n\n" > /dev/kmsg
if [ -n "$DRACUT_SYSTEMD" ]; then
if type plymouth >/dev/null 2>&1 && plymouth --ping ; then
if getargbool 0 rhgb || getargbool 0 splash ; then
m='>>>'$'\n''>>>'$'\n''>>>'$'\n\n\n'"$m"
m="${m%n.*}"$'n.\n\n\n''<<<'$'\n''<<<'$'\n''<<<'
plymouth display-message --text="${m}"
else
plymouth ask-question --prompt="${m}" --command=true
fi
else
m=">>>${m//.[[:space:]]/.} <<<"
systemd-ask-password --timeout=0 "${m}"
fi
else
type plymouth >/dev/null 2>&1 && plymouth --ping && plymouth --quit
read -s -r -p $'\n\n'"${m}" -n 1 reply
fi
fi
if [ -n "$overlayfs" ]; then
mkdir -m 0755 /run/overlayfs
mkdir -m 0755 /run/ovlwork
if [ -n "$readonly_overlay" ] && ! [ -h /run/overlayfs-r ]; then
info "No persistent overlay found."
unset -v readonly_overlay
[ -n "$DRACUT_SYSTEMD" ] && reloadsysrootmountunit="${reloadsysrootmountunit}:>/xor_readonly;"
fi
else
dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((overlay_size*1024)) 2> /dev/null
if [ -n "$setup" -a -n "$readonly_overlay" ]; then
RO_OVERLAY_LOOPDEV=$(losetup -f --show /overlay)
over=$RO_OVERLAY_LOOPDEV
else
OVERLAY_LOOPDEV=$(losetup -f --show /overlay)
over=$OVERLAY_LOOPDEV
fi
fi
fi
# set up the snapshot
if [ -z "$overlayfs" ]; then
if [ -n "$readonly_overlay" ] && [ -n "$OVERLAY_LOOPDEV" ]; then
echo 0 $sz snapshot $BASE_LOOPDEV $OVERLAY_LOOPDEV P 8 | dmsetup create --readonly live-ro
base="/dev/mapper/live-ro"
else
base=$BASE_LOOPDEV
fi
fi
if [ -n "$thin_snapshot" ]; then
modprobe dm_thin_pool
mkdir -m 0755 /run/initramfs/thin-overlay
# In block units (512b)
thin_data_sz=$(( $overlay_size * 1024 * 1024 / 512 ))
thin_meta_sz=$(( $thin_data_sz / 10 ))
# It is important to have the backing file on a tmpfs
# this is needed to let the loopdevice support TRIM
dd if=/dev/null of=/run/initramfs/thin-overlay/meta bs=1b count=1 seek=$((thin_meta_sz)) 2> /dev/null
dd if=/dev/null of=/run/initramfs/thin-overlay/data bs=1b count=1 seek=$((thin_data_sz)) 2> /dev/null
THIN_META_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/meta )
THIN_DATA_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/data )
echo 0 $thin_data_sz thin-pool $THIN_META_LOOPDEV $THIN_DATA_LOOPDEV 1024 1024 | dmsetup create live-overlay-pool
dmsetup message /dev/mapper/live-overlay-pool 0 "create_thin 0"
# Create a snapshot of the base image
echo 0 $sz thin /dev/mapper/live-overlay-pool 0 $base | dmsetup create live-rw
elif [ -z "$overlayfs" ]; then
echo 0 $sz snapshot $base $over PO 8 | dmsetup create live-rw
fi
# Create a device for the ro base of overlayed file systems.
if [ -z "$overlayfs" ]; then
echo 0 $sz linear $BASE_LOOPDEV 0 | dmsetup create --readonly live-base
fi
ln -s $BASE_LOOPDEV /dev/live-base
}
# end do_live_overlay()
# we might have a genMinInstDelta delta file for anaconda to take advantage of
if [ -e /run/initramfs/live/${live_dir}/osmin.img ]; then
OSMINSQFS=/run/initramfs/live/${live_dir}/osmin.img
# decompress the delta data
dd if=$OSMINSQFS of=/run/initramfs/osmin.img 2> /dev/null
OSMIN_SQUASHED_LOOPDEV=$( losetup -f )
losetup -r $OSMIN_SQUASHED_LOOPDEV /run/initramfs/osmin.img
mkdir -m 0755 -p /run/initramfs/squashfs.osmin
mount -n -t squashfs -o ro $OSMIN_SQUASHED_LOOPDEV /run/initramfs/squashfs.osmin
OSMIN_LOOPDEV=$( losetup -f )
losetup -r $OSMIN_LOOPDEV /run/initramfs/squashfs.osmin/osmin
umount -l /run/initramfs/squashfs.osmin
fi
# we might have an embedded fs image on squashfs (compressed live)
if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
fi
if [ -e "$SQUASHED" ]; then
if [ -n "$live_ram" ]; then
echo 'Copying live image to RAM...' > /dev/kmsg
echo ' (this may take a minute)' > /dev/kmsg
dd if=$SQUASHED of=/run/initramfs/squashed.img bs=512 2> /dev/null
echo 'Done copying live image to RAM.' > /dev/kmsg
SQUASHED="/run/initramfs/squashed.img"
fi
SQUASHED_LOOPDEV=$( losetup -f )
losetup -r $SQUASHED_LOOPDEV $SQUASHED
mkdir -m 0755 -p /run/initramfs/squashfs
mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /run/initramfs/squashfs
if [ -d /run/initramfs/squashfs/LiveOS ]; then
if [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
FSIMG="/run/initramfs/squashfs/LiveOS/rootfs.img"
elif [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
FSIMG="/run/initramfs/squashfs/LiveOS/ext3fs.img"
fi
elif [ -d /run/initramfs/squashfs/proc ]; then
FSIMG=$SQUASHED
if [ -z "$overlayfs" ] && [ -n "$DRACUT_SYSTEMD" ]; then
reloadsysrootmountunit=":>/xor_overlayfs;"
fi
overlayfs="required"
else
die "Failed to find a root filesystem in $SQUASHED."
exit 1
fi
else
# we might have an embedded fs image to use as rootfs (uncompressed live)
if [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
elif [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
fi
if [ -n "$live_ram" ]; then
echo 'Copying live image to RAM...' > /dev/kmsg
echo ' (this may take a minute or so)' > /dev/kmsg
dd if=$FSIMG of=/run/initramfs/rootfs.img bs=512 2> /dev/null
echo 'Done copying live image to RAM.' > /dev/kmsg
FSIMG='/run/initramfs/rootfs.img'
fi
fi
if [ -n "$FSIMG" ]; then
if [ -n "$writable_fsimg" ]; then
# mount the provided filesystem read/write
echo "Unpacking live filesystem (may take some time)" > /dev/kmsg
mkdir -m 0755 /run/initramfs/fsimg/
if [ -n "$SQUASHED" ]; then
cp -v $FSIMG /run/initramfs/fsimg/rootfs.img
else
unpack_archive $FSIMG /run/initramfs/fsimg/
fi
FSIMG=/run/initramfs/fsimg/rootfs.img
fi
opt=-r
# For writable DM images...
if [ -z "$SQUASHED" -a -n "$live_ram" -a -z "$overlayfs" ] ||
[ -n "$writable_fsimg" ] ||
[ "$overlay" = none -o "$overlay" = None -o "$overlay" = NONE ]; then
if [ -z "$readonly_overlay" ]; then
opt=''
setup=rw
else
setup=yes
fi
fi
if [ "$FSIMG" = "$SQUASHED" ]; then
BASE_LOOPDEV=$SQUASHED_LOOPDEV
else
BASE_LOOPDEV=$(losetup -f --show $opt $FSIMG)
sz=$(blockdev --getsz $BASE_LOOPDEV)
fi
if [ "$setup" = rw ]; then
echo 0 $sz linear $BASE_LOOPDEV 0 | dmsetup create live-rw
else
# Add a DM snapshot or OverlayFS for writes.
do_live_overlay
fi
fi
if [ -b "$OSMIN_LOOPDEV" ]; then
# set up the devicemapper snapshot device, which will merge
# the normal live fs image, and the delta, into a minimzied fs image
echo "0 $sz snapshot $BASE_LOOPDEV $OSMIN_LOOPDEV P 8" | dmsetup create --readonly live-osimg-min
fi
if [ -n "$reloadsysrootmountunit" ]; then
eval "$reloadsysrootmountunit"
systemctl daemon-reload
fi
ROOTFLAGS="$(getarg rootflags)"
if [ -n "$overlayfs" ]; then
mkdir -m 0755 /run/rootfsbase
if [ -n "$reset_overlay" ] && [ -h /run/overlayfs ]; then
ovlfs=$(readlink /run/overlayfs)
info "Resetting the OverlayFS overlay directory."
rm -r -- ${ovlfs}/* ${ovlfs}/.* >/dev/null 2>&1
fi
if [ -n "$readonly_overlay" ] && [ -h /run/overlayfs-r ]; then
ovlfs=lowerdir=/run/overlayfs-r:/run/rootfsbase
else
ovlfs=lowerdir=/run/rootfsbase
fi
mount -r $FSIMG /run/rootfsbase
if [ -z "$DRACUT_SYSTEMD" ]; then
printf 'mount -t overlay LiveOS_rootfs -o%s,%s %s\n' "$ROOTFLAGS" \
"$ovlfs",upperdir=/run/overlayfs,workdir=/run/ovlwork \
"$NEWROOT" > $hookdir/mount/01-$$-live.sh
fi
else
if [ -z "$DRACUT_SYSTEMD" ]; then
[ -n "$ROOTFLAGS" ] && ROOTFLAGS="-o $ROOTFLAGS"
printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
fi
fi
[ -e "$SQUASHED" ] && umount -l /run/initramfs/squashfs
ln -s null /dev/root
need_shutdown
exit 0
modules.d/03modsign/module-setup.sh 0000755 00000001330 15262675530 0013233 0 ustar 00 #!/bin/bash
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones
# called by dracut
check() {
require_binaries keyctl || return 1
# do not include module in hostonly mode,
# if no keys are present
if [[ $hostonly ]]; then
x=$(echo /lib/modules/keys/*)
[[ "${x}" = "/lib/modules/keys/*" ]] && return 255
fi
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_dir /lib/modules/keys
inst_binary keyctl
inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
for x in /lib/modules/keys/* ; do
[[ "${x}" = "/lib/modules/keys/*" ]] && break
inst_simple "${x}"
done
}
modules.d/03modsign/load-modsign-keys.sh 0000755 00000000352 15262675530 0014141 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones
for x in /lib/modules/keys/* ; do
[ "${x}" = "/lib/modules/keys/*" ] && break
keyctl padd asymmetric "" @s < ${x}
done
modules.d/80lvmthinpool-monitor/module-setup.sh 0000755 00000001100 15262675530 0015633 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm sort tr awk || return 1
return 255
}
# called by dracut
depends() {
echo lvm
return 0
}
# called by dracut
install() {
inst_multiple sort tr awk
inst_script "$moddir/start-thinpool-monitor.sh" "/bin/start-thinpool-monitor"
inst "$moddir/start-thinpool-monitor.service" "$systemdsystemunitdir/start-thinpool-monitor.service"
systemctl -q --root "$initdir" add-wants initrd.target start-thinpool-monitor.service
}
modules.d/80lvmthinpool-monitor/start-thinpool-monitor.service 0000644 00000000506 15262675530 0020720 0 ustar 00 [Unit]
Description=Lvm thinpool monitor service
Before=initrd.target
After=initrd-fs.target
Conflicts=shutdown.target emergency.target
[Service]
Type=forking
ExecStart=/bin/start-thinpool-monitor
PIDFile=/run/thinpool-moni.pid
StandardInput=null
StandardOutput=journal+console
StandardError=journal+console
KillSignal=SIGHUP
modules.d/80lvmthinpool-monitor/start-thinpool-monitor.sh 0000755 00000002402 15262675530 0017672 0 ustar 00 #!/bin/sh
type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh
LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=)
is_lvm2_thinp_device() {
_device_path=$1
_lvm2_thin_device=$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \
--nosuffix --noheadings -o vg_name,lv_name "$_device_path" 2> /dev/null)
[ -n "$_lvm2_thin_device" ] && return $?
}
for LV in $LVS; do
if is_lvm2_thinp_device "/dev/$LV"; then
THIN_POOLS="$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \
--nosuffix --noheadings -o vg_name,pool_lv "$LV" \
| awk '{printf("%s/%s",$1,$2);}') $THIN_POOLS"
fi
done
THIN_POOLS=$(echo "$THIN_POOLS" | tr ' ' '\n' | sort -u | tr '\n' ' ')
if [ -n "$THIN_POOLS" ]; then
if [ -e "/etc/lvm/lvm.conf" ]; then
# Use 'monitoring=0' to override the value in lvm.conf, in case
# dmeventd monitoring been started after the calling.
CONFIG="activation {monitoring=0}"
else
CONFIG="activation {monitoring=0 thin_pool_autoextend_threshold=70 thin_pool_autoextend_percent=20}"
fi
while true; do
for THIN_POOL in $THIN_POOLS; do
lvm lvextend --use-policies --config "$CONFIG" "$THIN_POOL"
done
sleep 5
done &
echo $! > /run/thinpool-moni.pid
fi
modules.d/00warpclock/module-setup.sh 0000644 00000001226 15262675530 0013556 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
check() {
# hwclock does not exist on S390(x), bail out silently then
local _arch=$(uname -m)
[ "$_arch" = "s390" -o "$_arch" = "s390x" ] && return 1
[ -e /etc/localtime -a -e /etc/adjtime ] || return 1
require_binaries /sbin/hwclock || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst /usr/share/zoneinfo/UTC
inst /etc/localtime
inst /etc/adjtime
inst_hook pre-trigger 00 "$moddir/warpclock.sh"
inst /sbin/hwclock
}
modules.d/00warpclock/warpclock.sh 0000644 00000000227 15262675530 0013120 0 ustar 00 #!/bin/sh
if test -e /etc/adjtime ; then
while read line ; do
if test "$line" = LOCAL ; then
hwclock --systz
fi
done < /etc/adjtime
fi
modules.d/04watchdog-modules/module-setup.sh 0000755 00000003623 15262675530 0015051 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
return 0
}
installkernel() {
local -A _drivers
local _alldrivers _wdtdrv _wdtppath _dir
[[ -d /sys/class/watchdog/ ]] || return
for _dir in /sys/class/watchdog/*; do
[[ -d "$_dir" ]] || continue
[[ -f "$_dir/state" ]] || continue
# device/modalias will return driver of this device
_wdtdrv=$(< "$_dir/device/modalias")
# There can be more than one module represented by same
# modalias. Currently load all of them.
# TODO: Need to find a way to avoid any unwanted module
# represented by modalias
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
# however in some cases, we also need to check that if there is
# a specific driver for the parent bus/device. In such cases
# we also need to enable driver for parent bus/device.
_wdtppath=$(readlink -f "$_dir/device")
while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do
_wdtppath=$(readlink -f "$_wdtppath/..")
[[ -f "$_wdtppath/modalias" ]] || continue
_wdtdrv=$(< "$_wdtppath/modalias")
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
done
done
# ensure that watchdog module is loaded as early as possible
_alldrivers="${!_drivers[*]}"
[[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf
return 0
}
modules.d/95fcoe-uefi/module-setup.sh 0000755 00000000766 15262675530 0013464 0 ustar 00 #!/bin/bash
# called by dracut
check() {
is_fcoe() {
block_is_fcoe $1 || return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_fcoe || return 255
[ -d /sys/firmware/efi ] || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink || return 1
return 0
}
# called by dracut
depends() {
echo fcoe uefi-lib
return 0
}
# called by dracut
install() {
inst_hook cmdline 20 "$moddir/parse-uefifcoe.sh"
}
modules.d/95fcoe-uefi/parse-uefifcoe.sh 0000755 00000001630 15262675530 0013725 0 ustar 00 #!/bin/bash
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v get_fcoe_boot_mac >/dev/null || . /lib/uefi-lib.sh
command -v set_ifname >/dev/null || . /lib/net-lib.sh
print_fcoe_uefi_conf()
{
local mac dev vlan
mac=$(get_fcoe_boot_mac "$1")
[ -z "$mac" ] && return 1
dev=$(set_ifname fcoe "$mac")
vlan=$(get_fcoe_boot_vlan "$1") || return 1
case "$vlan" in
"0") ;;
'')
return 1
;;
[0-9]*)
printf "%s\n" "vlan=$dev.$vlan:$dev"
dev="$dev.$vlan"
;;
*)
printf "%s\n" "vlan=$vlan:$dev"
dev="$vlan"
;;
esac
# fcoe=eth0:nodcb
printf "fcoe=%s\n" "$dev:nodcb"
return 0
}
for i in /sys/firmware/efi/vars/FcoeBootDevice-*/data; do
[ -e "$i" ] || continue
print_fcoe_uefi_conf $i > /etc/cmdline.d/40-fcoe-uefi.conf && break
done
modules.d/50drm/module-setup.sh 0000755 00000002514 15262675530 0012364 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
local _modname
# Include KMS capable drm drivers
if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then
# arm/aarch64 specific modules needed by drm
instmods \
"=drivers/gpu/drm/i2c" \
"=drivers/gpu/drm/panel" \
"=drivers/gpu/drm/bridge" \
"=drivers/video/backlight" \
${NULL}
fi
instmods amdkfd hyperv_fb "=drivers/pwm"
# if the hardware is present, include module even if it is not currently loaded,
# as we could e.g. be in the installer; nokmsboot boot parameter will disable
# loading of the driver if needed
if [[ $hostonly ]]; then
for i in /sys/bus/{pci/devices,virtio/devices,soc/devices/soc?}/*/modalias; do
[[ -e $i ]] || continue
if hostonly="" dracut_instmods --silent -s "drm_crtc_init|drm_dev_register" -S "iw_handler_get_spy" $(<$i); then
if strstr "$(modinfo -F filename $(<$i) 2>/dev/null)" radeon.ko; then
hostonly='' instmods amdkfd
fi
fi
done
else
dracut_instmods -o -s "drm_crtc_init|drm_dev_register" "=drivers/gpu/drm" "=drivers/staging"
fi
}
modules.d/03rescue/module-setup.sh 0000755 00000000571 15262675530 0013067 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple -o ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck
}
modules.d/99base/module-setup.sh 0000755 00000010013 15262675530 0012522 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo udev-rules
return 0
}
# called by dracut
install() {
local _d
inst_multiple mount mknod mkdir sleep chroot chown \
sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid
inst $(command -v modprobe) /sbin/modprobe
inst_multiple -o findmnt less kmod
if [ ! -e "${initdir}/bin/sh" ]; then
inst_multiple bash
(ln -s bash "${initdir}/bin/sh" || :)
fi
#add common users in /etc/passwd, it will be used by nfs/ssh currently
grep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
# install our scripts and hooks
inst_script "$moddir/init.sh" "/init"
inst_script "$moddir/initqueue.sh" "/sbin/initqueue"
inst_script "$moddir/loginit.sh" "/sbin/loginit"
inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
mkdir -p ${initdir}/tmp
inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
mkdir -p "${initdir}/var"
if ! dracut_module_included "systemd"; then
inst_multiple switch_root || dfatal "Failed to install switch_root"
inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
inst_multiple -o $systemdutildir/systemd-timestamp
fi
if [[ $realinitpath ]]; then
for i in $realinitpath; do
echo "rd.distroinit=$i"
done > "${initdir}/etc/cmdline.d/distroinit.conf"
fi
ln -fs /proc/self/mounts "$initdir/etc/mtab"
if [[ $ro_mnt = yes ]]; then
echo ro >> "${initdir}/etc/cmdline.d/base.conf"
fi
local VERSION=""
local PRETTY_NAME=""
if [ -e /etc/os-release ]; then
. /etc/os-release
[[ -n ${VERSION} ]] && VERSION+=" "
[[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
fi
NAME=dracut
ID=dracut
VERSION+="dracut-$DRACUT_VERSION"
PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
VERSION_ID=$DRACUT_VERSION
ANSI_COLOR="0;31"
[ -e "${initdir}/usr/lib" ] || mkdir -m 0755 -p ${initdir}/usr/lib
{
echo NAME=\"$NAME\"
echo VERSION=\"$VERSION\"
echo ID=$ID
echo VERSION_ID=$VERSION_ID
echo PRETTY_NAME=\"$PRETTY_NAME\"
echo ANSI_COLOR=\"$ANSI_COLOR\"
} > $initdir/usr/lib/initrd-release
echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
ln -sf initrd-release $initdir/usr/lib/os-release
ln -sf initrd-release $initdir/etc/os-release
## save host_devs which we need bring up
if [[ $hostonly_cmdline == "yes" ]]; then
if [[ -n "${host_devs[@]}" ]]; then
dracut_need_initqueue
fi
if [[ -f "$initdir/lib/dracut/need-initqueue" ]] || ! dracut_module_included "systemd"; then
(
if dracut_module_included "systemd"; then
DRACUT_SYSTEMD=1
fi
PREFIX="$initdir"
. "$moddir/dracut-lib.sh"
for _dev in "${host_devs[@]}"; do
for _dev2 in "${root_devs[@]}"; do
[[ "$_dev" == "$_dev2" ]] && continue 2
done
# We only actually wait for real devs - swap is only needed
# for resume and udev rules generated when parsing resume=
# argument take care of the waiting for us
for _dev2 in "${swap_devs[@]}"; do
[[ "$_dev" == "$_dev2" ]] && continue 2
done
_pdev=$(get_persistent_dev $_dev)
case "$_pdev" in
/dev/?*) wait_for_dev $_pdev;;
*) ;;
esac
done
)
fi
fi
}
modules.d/99base/init.sh 0000755 00000027025 15262675530 0011055 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer
# Jeremy Katz
export -p > /tmp/export.orig
NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
OLDPATH=$PATH
PATH=/usr/sbin:/usr/bin:/sbin:/bin
export PATH
# mount some important things
[ ! -d /proc/self ] && \
mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!"
exit 1
fi
[ ! -d /sys/kernel ] && \
mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!"
exit 1
fi
RD_DEBUG=""
. /lib/dracut-lib.sh
setdebug
if ! ismounted /dev; then
mount -t devtmpfs -o mode=0755,noexec,nosuid,strictatime devtmpfs /dev >/dev/null
fi
if ! ismounted /dev; then
echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!"
exit 1
fi
# prepare the /dev directory
[ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1
[ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1
[ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1
[ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1
if ! ismounted /dev/pts; then
mkdir -m 0755 /dev/pts
mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null
fi
if ! ismounted /dev/shm; then
mkdir -m 0755 /dev/shm
mount -t tmpfs -o mode=1777,noexec,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null
fi
if ! ismounted /run; then
mkdir -m 0755 /newrun
if ! str_starts "$(readlink -f /bin/sh)" "/run/"; then
mount -t tmpfs -o mode=0755,noexec,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
else
# the initramfs binaries are located in /run, so don't mount it with noexec
mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
fi
cp -a /run/* /newrun >/dev/null 2>&1
mount --move /newrun /run
rm -fr -- /newrun
fi
if command -v kmod >/dev/null 2>/dev/null; then
kmod static-nodes --format=tmpfiles 2>/dev/null | \
while read type file mode a a a majmin || [ -n "$type" ]; do
type=${type%\!}
case $type in
d)
mkdir -m $mode -p $file
;;
c)
mknod -m $mode $file $type ${majmin%:*} ${majmin#*:}
;;
esac
done
fi
trap "emergency_shell Signal caught!" 0
export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -gt 166 ]; then
# newer versions of udev use /run/udev/rules.d
export UDEVRULESD=/run/udev/rules.d
[ -d /run/udev ] || mkdir -p -m 0755 /run/udev
[ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD
else
mkdir -m 0755 /dev/.udev /dev/.udev/rules.d
export UDEVRULESD=/dev/.udev/rules.d
fi
if [ "$RD_DEBUG" = "yes" ]; then
mkfifo /run/initramfs/loginit.pipe
loginit $DRACUT_QUIET /dev/console 2>&1 &
exec >/run/initramfs/loginit.pipe 2>&1
else
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
fi
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID"
source_conf /etc/conf.d
if getarg "rd.cmdline=ask"; then
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -p "> " line || [ -n "$line" ]; do
[ "$line" = "." ] && break
echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
fi
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
# run scriptlets to parse the command line
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
# pre-udev scripts run before udev starts, and are run only once.
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev"
source_hook pre-udev
UDEV_LOG=err
getargbool 0 rd.udev.info -d -y rdudevinfo && UDEV_LOG=info
getargbool 0 rd.udev.debug -d -y rdudevdebug && UDEV_LOG=debug
# start up udev and trigger cold plugs
UDEV_LOG=$UDEV_LOG $systemdutildir/systemd-udevd --daemon --resolve-names=never
UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"
if [ $UDEVVERSION -lt 140 ]; then
UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi
udevproperty "hookdir=$hookdir"
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger
udevadm control --reload >/dev/null 2>&1 || :
# then the rest
udevadm trigger --type=subsystems --action=add >/dev/null 2>&1
udevadm trigger --type=devices --action=add >/dev/null 2>&1
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevsettle
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- $hookdir/initqueue/work
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
done
fi
main_loop=$(($main_loop+1))
[ $main_loop -gt $RDRETRY ] \
&& { flock -s 9 ; emergency_shell "Could not boot."; } 9>/.console_lock
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
# pre-mount happens before we try to mount the root filesystem,
# and happens once.
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
_i_mount=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
_i_mount=$(($_i_mount+1))
[ $_i_mount -gt 20 ] \
&& { flock -s 9 ; emergency_shell "Can't mount root filesystem"; } 9>/.console_lock
done
{
printf "Mounted root filesystem "
while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts
} | vinfo
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
# By the time we get here, the root filesystem should be mounted.
# Try to find init.
for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do
[ -n "$i" ] || continue
__p=$(readlink -f "${NEWROOT}/${i}")
if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then
INIT="$i"
break
fi
done
[ "$INIT" ] || {
echo "Cannot find init!"
echo "Please check to make sure you passed a valid root filesystem!"
emergency_shell
}
if [ $UDEVVERSION -lt 168 ]; then
# stop udev queue before killing it
udevadm control --stop-exec-queue
HARD=""
while pidof udevd >/dev/null 2>&1; do
for pid in $(pidof udevd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
else
udevadm control --exit
udevadm info --cleanup-db
fi
debug_off # Turn off debugging for this section
# unexport some vars
export_n root rflags fstype netroot NEWROOT
export RD_TIMESTAMP
# Clean up the environment
for i in $(export -p); do
i=${i#declare -x}
i=${i#export}
strstr "$i" "=" || continue
i=${i%%=*}
[ -z "$i" ] && continue
case $i in
root|PATH|HOME|TERM|PS4|RD_*)
:;;
*)
unset "$i";;
esac
done
. /tmp/export.orig 2>/dev/null || :
rm -f -- /tmp/export.orig
initargs=""
read CLINE /dev/null ; then
ignoreargs="console BOOT_IMAGE"
# only pass arguments after init= to the init
CLINE=${CLINE#*init=}
set -- $CLINE
shift # clear out the rest of the "init=" arg
for x in "$@"; do
for s in $ignoreargs; do
[ "${x%%=*}" = $s ] && continue 2
done
initargs="$initargs $x"
done
unset CLINE
else
debug_off # Turn off debugging for this section
set -- $CLINE
for x in "$@"; do
case "$x" in
[0-9]|s|S|single|emergency|auto ) \
initargs="$initargs $x"
;;
esac
done
fi
debug_on
if ! [ -d "$NEWROOT"/run ]; then
NEWRUN=/dev/.initramfs
mkdir -m 0755 "$NEWRUN"
mount --rbind /run/initramfs "$NEWRUN"
fi
wait_for_loginit
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
bv=$(getarg rd.break -d rdbreak) && [ -z "$bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset bv
info "Switching root"
unset PS4
CAPSH=$(command -v capsh)
SWITCH_ROOT=$(command -v switch_root)
PATH=$OLDPATH
export PATH
if [ -f /etc/capsdrop ]; then
. /etc/capsdrop
info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped."
unset RD_DEBUG
exec $CAPSH --drop="$CAPS_INIT_DROP" -- \
-c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \
{
warn "Command:"
warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs
warn "failed."
emergency_shell
}
else
unset RD_DEBUG
exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || {
warn "Something went very badly wrong in the initramfs. Please "
warn "file a bug against dracut."
emergency_shell
}
fi
modules.d/99base/initqueue.sh 0000755 00000002243 15262675530 0012115 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2+
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case "$1" in
--onetime)
onetime="yes";;
--online)
qname="/online";;
--settled)
qname="/settled";;
--finished)
qname="/finished";;
--timeout)
qname="/timeout";;
--unique)
unique="yes";;
--name)
name="$2";shift;;
--env)
env="$2"; shift;;
*)
break;;
esac
shift
done
if [ -z "$unique" ]; then
job="${name}$$"
else
job="${name:-$1}"
job=${job##*/}
fi
exe=$1
shift
[ -x "$exe" ] || exe=$(command -v $exe)
if [ -z "$exe" ] ; then
echo "Invalid command"
exit 1
fi
{
[ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"'
[ -n "$env" ] && echo "$env"
printf '%q ' "$exe" "$@"
printf '\n'
} > "/tmp/$$-${job}.sh"
mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh"
[ -z "$qname" ] && >> $hookdir/initqueue/work
exit 0
modules.d/99base/loginit.sh 0000755 00000000754 15262675530 0011557 0 ustar 00 #!/bin/sh
# turn off debugging
set +x
QUIET=$1
printf -- "$$" > /run/initramfs/loginit.pid
[ -e /dev/kmsg ] && exec 5>/dev/kmsg || exec 5>/dev/null
exec 6>/run/initramfs/init.log
while read line || [ -n "$line" ]; do
if [ "$line" = "DRACUT_LOG_END" ]; then
rm -f -- /run/initramfs/loginit.pipe
exit 0
fi
echo "<31>dracut: $line" >&5
# if "quiet" is specified we output to /dev/console
[ -n "$QUIET" ] || echo "dracut: $line"
echo "$line" >&6
done
modules.d/99base/rdsosreport.sh 0000755 00000002502 15262675530 0012471 0 ustar 00 #!/bin/sh
echo 'Generating "/run/initramfs/rdsosreport.txt"'
[ -d /run/initramfs ] || mkdir -p /run/initramfs
exec >/run/initramfs/rdsosreport.txt 2>&1
PWFILTER='s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
set -x
cat /lib/dracut/dracut-*
cat /proc/cmdline | sed -e "$PWFILTER"
[ -f /etc/cmdline ] && cat /etc/cmdline | sed -e "$PWFILTER"
for _i in /etc/cmdline.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
cat /proc/self/mountinfo
cat /proc/mounts
blkid
blkid -o udev
ls -l /dev/disk/by*
for _i in /etc/conf.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
if command -v lvm >/dev/null 2>/dev/null; then
lvm pvdisplay
lvm vgdisplay
lvm lvdisplay
fi
command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree
cat /proc/mdstat
command -v ip >/dev/null 2>/dev/null && ip addr
if command -v journalctl >/dev/null 2>/dev/null; then
journalctl -ab --no-pager -o short-monotonic | sed -e "$PWFILTER"
else
dmesg | sed -e "$PWFILTER"
[ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log | sed -e "$PWFILTER"
fi
modules.d/99base/parse-root-opts.sh 0000755 00000000366 15262675530 0013167 0 ustar 00 #!/bin/sh
root=$(getarg root=)
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
modules.d/99base/dracut-lib.sh 0000755 00000102111 15262675530 0012126 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD
export NEWROOT
if [ -n "$NEWROOT" ]; then
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
fi
if ! [ -d /run/initramfs ]; then
mkdir -p -m 0755 /run/initramfs/log
ln -sfn /run/initramfs/log /var/log
fi
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
debug_off() {
set +x
}
debug_on() {
[ "$RD_DEBUG" = "yes" ] && set -x
}
# returns OK if $1 contains literal string $2 (and isn't empty)
strstr() {
[ "${1##*"$2"*}" != "$1" ]
}
# returns OK if $1 matches (completely) glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglob() {
[ -n "$1" -a -z "${1##$2}" ]
}
# returns OK if $1 contains (anywhere) a match of glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglobin() {
[ -n "$1" -a -z "${1##*$2*}" ]
}
# returns OK if $1 contains literal string $2 at the beginning, and isn't empty
str_starts() {
[ "${1#"$2"*}" != "$1" ]
}
# returns OK if $1 contains literal string $2 at the end, and isn't empty
str_ends() {
[ "${1%*"$2"}" != "$1" ]
}
trim() {
local var="$*"
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
printf "%s" "$var"
}
if [ -z "$DRACUT_SYSTEMD" ]; then
warn() {
check_quiet
echo "<28>dracut Warning: $*" > /dev/kmsg
echo "dracut Warning: $*" >&2
}
info() {
check_quiet
echo "<30>dracut: $*" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
echo "dracut: $*" >&2
}
else
warn() {
echo "Warning: $*" >&2
}
info() {
echo "$*"
}
fi
vwarn() {
while read line || [ -n "$line" ]; do
warn $line;
done
}
vinfo() {
while read line || [ -n "$line" ]; do
info $line;
done
}
# replaces all occurrences of 'search' in 'str' with 'replacement'
#
# str_replace str search replacement
#
# example:
# str_replace ' one two three ' ' ' '_'
str_replace() {
local in="$1"; local s="$2"; local r="$3"
local out=''
while strstr "${in}" "$s"; do
chop="${in%%"$s"*}"
out="${out}${chop}$r"
in="${in#*"$s"}"
done
echo "${out}${in}"
}
killall_proc_mountpoint() {
local _pid
local _t
local _killed=0
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" ; then
kill -9 "$_pid"
_killed=1
fi
done
return $_killed
}
getcmdline() {
local _line
local _i
local CMDLINE_ETC_D
local CMDLINE_ETC
local CMDLINE_PROC
unset _line
if [ -e /etc/cmdline ]; then
while read -r _line || [ -n "$_line" ]; do
CMDLINE_ETC="$CMDLINE_ETC $_line";
done ", we want the exact match
if [ "$_o" = "$1" ]; then
_val="1";
unset _doecho
fi
continue
fi
if [ "${_o#*=}" = "$_o" ]; then
# if cmdline argument has no "=", we assume "=1"
_val="1";
unset _doecho
continue
fi
_val="${_o#*=}"
_doecho=1
fi
done
if [ -n "$_val" ]; then
[ "x$_doecho" != "x" ] && echo "$_val";
return 0;
fi
return 1;
}
getarg() {
debug_off
local _deprecated _newoption
while [ $# -gt 0 ]; do
case $1 in
-d) _deprecated=1; shift;;
-y) if _dogetarg $2 >/dev/null; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated."
fi
echo 1
debug_on
return 0
fi
_deprecated=0
shift 2;;
-n) if _dogetarg $2 >/dev/null; then
echo 0;
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated."
fi
debug_on
return 1
fi
_deprecated=0
shift 2;;
*) if [ -z "$_newoption" ]; then
_newoption="$1"
fi
if _dogetarg $1; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated."
fi
debug_on
return 0;
fi
_deprecated=0
shift;;
esac
done
debug_on
return 1
}
# getargbool
# False if "getarg " returns "0", "no", or "off".
# True if getarg returns any other non-empty string.
# If not found, assumes - usually 0 for false, 1 for true.
# example: getargbool 0 rd.info
# true: rd.info, rd.info=1, rd.info=xxx
# false: rd.info=0, rd.info=off, rd.info not present (default val is 0)
getargbool() {
local _b
unset _b
local _default
_default="$1"; shift
_b=$(getarg "$@")
[ $? -ne 0 -a -z "$_b" ] && _b="$_default"
if [ -n "$_b" ]; then
[ $_b = "0" ] && return 1
[ $_b = "no" ] && return 1
[ $_b = "off" ] && return 1
fi
return 0
}
isdigit() {
case "$1" in
*[!0-9]*|"") return 1;;
esac
return 0
}
# getargnum
# Will echo the arg if it's in range [minval - maxval].
# If it's not set or it's not valid, will set it .
# Note all values are required to be >= 0 here.
# should be with [minval -maxval].
getargnum() {
local _b
unset _b
local _default _min _max
_default="$1"; shift
_min="$1"; shift
_max="$1"; shift
_b=$(getarg "$1")
[ $? -ne 0 -a -z "$_b" ] && _b=$_default
if [ -n "$_b" ]; then
isdigit "$_b" && _b=$(($_b)) && \
[ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return
fi
echo $_default
}
_dogetargs() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%%=*}" = "${_key%=}" ]; then
[ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
getargs() {
debug_off
local _val _i _args _gfound _deprecated
unset _val
unset _gfound
_newoption="$1"
_args="$@"
set --
for _i in $_args; do
if [ "$_i" = "-d" ]; then
_deprecated=1
continue
fi
_val="$(_dogetargs $_i)"
if [ $? -eq 0 ]; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!"
fi
_gfound=1
fi
[ -n "$_val" ] && set -- "$@" "$_val"
_deprecated=0
done
if [ -n "$_gfound" ]; then
if [ $# -gt 0 ]; then
printf '%s' "$*"
fi
debug_on
return 0
fi
debug_on
return 1;
}
# Prints value of given option. If option is a flag and it's present,
# it just returns 0. Otherwise 1 is returned.
# $1 = options separated by commas
# $2 = option we are interested in
#
# Example:
# $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify
# $2 = hash
# Output:
# sha256
getoptcomma() {
local line=",$1,"; local opt="$2"; local tmp
case "${line}" in
*,${opt}=*,*)
tmp="${line#*,${opt}=}"
echo "${tmp%%,*}"
return 0
;;
*,${opt},*) return 0;;
esac
return 1
}
# Splits given string 'str' with separator 'sep' into variables 'var1', 'var2',
# 'varN'. If number of fields is less than number of variables, remaining are
# not set. If number of fields is greater than number of variables, the last
# variable takes remaining fields. In short - it acts similary to 'read'.
#
# splitsep sep str var1 var2 varN
#
# example:
# splitsep ':' 'foo:bar:baz' v1 v2
# in result:
# v1='foo', v2='bar:baz'
#
# TODO: ':' inside fields.
splitsep() {
debug_off
local sep="$1"; local str="$2"; shift 2
local tmp
while [ -n "$str" -a "$#" -gt 1 ]; do
tmp="${str%%$sep*}"
local -n _splitsep_ref="$1"
_splitsep_ref="$tmp"
unset -n _splitsep_ref
str="${str#"$tmp"}"
str="${str#$sep}"
shift
done
if [ -n "$str" -a -n "$1" ]; then
local -n _splitsep_ref="$1"
_splitsep_ref="$str"
unset -n _splitsep_ref
fi
debug_on
return 0
}
setdebug() {
[ -f /usr/lib/initrd-release ] || return
if [ -z "$RD_DEBUG" ]; then
if [ -e /proc/cmdline ]; then
RD_DEBUG=no
if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
RD_DEBUG=yes
[ -n "$BASH" ] && \
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
fi
fi
export RD_DEBUG
fi
debug_on
}
setdebug
source_all() {
local f
local _dir
_dir=$1; shift
[ "$_dir" ] && [ -d "/$_dir" ] || return
for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done
}
hookdir=/lib/dracut/hooks
export hookdir
source_hook() {
local _dir
_dir=$1; shift
source_all "/lib/dracut/hooks/$_dir" "$@"
}
check_finished() {
local f
for f in $hookdir/initqueue/finished/*.sh; do
[ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0
{ [ -e "$f" ] && ( . "$f" ) ; } || return 1
done
return 0
}
source_conf() {
local f
[ "$1" ] && [ -d "/$1" ] || return
for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done
}
die() {
{
echo "<24>dracut: FATAL: $*";
echo "<24>dracut: Refusing to continue";
} > /dev/kmsg
{
printf 'warn dracut: FATAL: %q\n' "$*"
echo "warn dracut: Refusing to continue"
} >> $hookdir/emergency/01-die.sh
[ -d /run/initramfs ] || mkdir -p -- /run/initramfs
> /run/initramfs/.die
if getargbool 0 "rd.shell"; then
emergency_shell
else
source_hook "shutdown-emergency"
fi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl --no-block --force halt
fi
exit 1
}
check_quiet() {
if [ -z "$DRACUT_QUIET" ]; then
DRACUT_QUIET="yes"
getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no"
getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no"
getarg quiet || DRACUT_QUIET="yes"
a=$(getarg loglevel=)
[ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes"
export DRACUT_QUIET
fi
}
check_occurances() {
# Count the number of times the character $ch occurs in $str
# Return 0 if the count matches the expected number, 1 otherwise
local str="$1"
local ch="$2"
local expected="$3"
local count=0
while [ "${str#*$ch}" != "${str}" ]; do
str="${str#*$ch}"
count=$(( $count + 1 ))
done
[ $count -eq $expected ]
}
incol2() {
debug_off
local dummy check;
local file="$1";
local str="$2";
[ -z "$file" ] && return 1;
[ -z "$str" ] && return 1;
while read dummy check restofline || [ -n "$check" ]; do
if [ "$check" = "$str" ]; then
debug_on
return 0
fi
done < $file
debug_on
return 1
}
udevsettle() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists
else
udevadm settle --timeout=30
fi
}
udevproperty() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
for i in "$@"; do udevadm control --property=$i; done
else
for i in "$@"; do udevadm control --env=$i; done
fi
}
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc || [ -n "$dev" ]; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted
# usage: ismounted /dev/
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a || [ -n "$m" ]; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# root=nfs:[:][:]
# root=nfs4:[:][:]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# Create udev rule match for a device with its device name, or the udev property
# ID_FS_UUID or ID_FS_LABEL
#
# example:
# udevmatch LABEL=boot
# prints:
# ENV{ID_FS_LABEL}="boot"
#
# TODO: symlinks
udevmatch() {
case "$1" in
UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)
printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}"
;;
UUID=*)
printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}"
;;
PARTUUID=*)
printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}"
;;
/dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;;
*) return 255 ;;
esac
}
# Prints unique path for potential file inside specified directory. It consists
# of specified directory, prefix and number at the end which is incremented
# until non-existing file is found.
#
# funiq dir prefix
#
# example:
# # ls /mnt
# cdrom0 cdrom1
#
# # funiq /mnt cdrom
# /mnt/cdrom2
funiq() {
local dir="$1"; local prefix="$2"
local i=0
[ -d "${dir}" ] || return 1
while [ -e "${dir}/${prefix}$i" ]; do
i=$(($i+1)) || return 1
done
echo "${dir}/${prefix}$i"
}
# Creates unique directory and prints its path. It's using funiq to generate
# path.
#
# mkuniqdir subdir new_dir_name
mkuniqdir() {
local dir="$1"; local prefix="$2"
local retdir; local retdir_new
[ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1
retdir=$(funiq "${dir}" "${prefix}") || return 1
until mkdir -m 0755 "${retdir}" 2>/dev/null; do
retdir_new=$(funiq "${dir}" "${prefix}") || return 1
[ "$retdir_new" = "$retdir" ] && return 1
retdir="$retdir_new"
done
echo "${retdir}"
}
# Copy the contents of SRC into DEST, merging the contents of existing
# directories (kinda like rsync, or cpio -p).
# Creates DEST if it doesn't exist. Overwrites files with the same names.
#
# copytree SRC DEST
copytree() {
local src="$1" dest="$2"
mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
( cd "$src"; cp -af . -t "$dest" )
}
# Evaluates command for UUIDs either given as arguments for this function or all
# listed in /dev/disk/by-uuid. UUIDs doesn't have to be fully specified. If
# beginning is given it is expanded to all matching UUIDs. To pass full UUID to
# your command use '$___' as a place holder. Remember to escape '$'!
#
# foreach_uuid_until [ -p prefix ] command UUIDs
#
# prefix - string to put just before $___
# command - command to be evaluated
# UUIDs - list of UUIDs separated by space
#
# The function returns after *first successful evaluation* of the given command
# with status 0. If evaluation fails for every UUID function returns with
# status 1.
#
# Example:
# foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \
# "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb"
foreach_uuid_until() (
cd /dev/disk/by-uuid
[ "$1" = -p ] && local prefix="$2" && shift 2
local cmd="$1"; shift; local uuids_list="$*"
local uuid; local full_uuid; local ___
[ -n "${cmd}" ] || return 1
for uuid in ${uuids_list:-*}; do
for full_uuid in ${uuid}*; do
[ -e "${full_uuid}" ] || continue
___="${prefix}${full_uuid}"
eval ${cmd} && return 0
done
done
return 1
)
# Get kernel name for given device. Device may be the name too (then the same
# is returned), a symlink (full path), UUID (prefixed with "UUID=") or label
# (prefixed with "LABEL="). If just a beginning of the UUID is specified or
# even an empty, function prints all device names which UUIDs match - every in
# single line.
#
# NOTICE: The name starts with "/dev/".
#
# Example:
# devnames UUID=123
# May print:
# /dev/dm-1
# /dev/sdb1
# /dev/sdf3
devnames() {
local dev="$1"; local d; local names
case "$dev" in
UUID=*)
dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \
&& return 255
[ -z "$dev" ] && return 255
;;
LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;;
/dev/?*) ;;
*) return 255 ;;
esac
for d in $dev; do
names="$names
$(readlink -e -q "$d")" || return 255
done
echo "${names#
}"
}
usable_root() {
local _i
[ -d "$1" ] || return 1
for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do
[ -e "$_i" ] && return 0
done
for _i in proc sys dev; do
[ -e "$1"/$_i ] || return 1
done
return 0
}
inst_hook() {
local _hookname _unique _name _job _exe
while [ $# -gt 0 ]; do
case "$1" in
--hook)
_hookname="/$2";shift;;
--unique)
_unique="yes";;
--name)
_name="$2";shift;;
*)
break;;
esac
shift
done
if [ -z "$_unique" ]; then
_job="${_name}$$"
else
_job="${_name:-$1}"
_job=${_job##*/}
fi
_exe=$1
shift
[ -x "$_exe" ] || _exe=$(command -v $_exe)
if [ -n "$onetime" ]; then
{
echo '[ -e "$_job" ] && rm -f -- "$_job"'
echo "$_exe $@"
} > "/tmp/$$-${_job}.sh"
else
echo "$_exe $@" > "/tmp/$$-${_job}.sh"
fi
mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh"
}
# inst_mount_hook